Why a Spirit?
-
I had a spirit and like said it does pack alot of tools in its frame,it has vics presision and fit and Finnish,but for me personaly I prefer the wave ,I like lm's pliers over the vics blunted pliers, I prefer the waves diamond file, both these tools scissors arnt the best out there but are ok,I generally find vics drivers a bit slippy due to polished,I could go on and on ,but as said you need to handle one ,I'm also not a fan of its looks ,but hey I'm a LM guy ;)
-
I agree with 50 on every thing he had to say about the Spirit, and would say the same plus for the Swisstool.
On the other hand I must take exception to the comments of Ducttape with reguards to the Swisstool. I primarily work on commercial hot food equipment, greasy, oily, gritty, and carbon covered equipment. The Swisstool is my single most used hand tool, only exceded by my multi-meter. For some reason I don't realy care for that shocking sensation from a live circuit. :ahhh
I personaly have never had a problem with the precision of the Swiswstool being hard to hold or otherwise. I to came to the plier based MT via Leatherman, but after breaking the handles of three Waves just below the pivot point in one year I happened upon the Swisstool. The Lm's all broke under what I consider to be "normal" use. To be fair to LM I have broken a blade on my Swisstool, but that was absolutly abuse and not "normal" use. Yes I admit I abuse my Swisstool. I can not speek for how the Spirit handles under the greasy etc... conditions as it is a lighter tool than the Spirit and being so I would not put it through the abuse of what my job requires. Even being a lighter tool I belive it superior to the Wave and most if not all LM products. When is the last time you saw actual rust on a SAK.
Ok I've said enough.
Mappy MT's to all. -
@Douglas said:
I agree with 50 on every thing he had to say about the Spirit, and would say the same plus for the Swisstool.
On the other hand I must take exception to the comments of Ducttape with reguards to the Swisstool. I primarily work on commercial hot food equipment, greasy, oily, gritty, and carbon covered equipment. The Swisstool is my single most used hand tool, only exceded by my multi-meter. For some reason I don't realy care for that shocking sensation from a live circuit. :ahhh
I personaly have never had a problem with the precision of the Swiswstool being hard to hold or otherwise. I to came to the plier based MT via Leatherman, but after breaking the handles of three Waves just below the pivot point in one year I happened upon the Swisstool. The Lm's all broke under what I consider to be "normal" use. To be fair to LM I have broken a blade on my Swisstool, but that was absolutly abuse and not "normal" use. Yes I admit I abuse my Swisstool. I can not speek for how the Spirit handles under the greasy etc... conditions as it is a lighter tool than the Spirit and being so I would not put it through the abuse of what my job requires. Even being a lighter tool I belive it superior to the Wave and most if not all LM products.
**When is the last time you saw actual rust on a SAK. **
Ok I've said enough.Mappy MT's to all.
Last Sunday on Al's Spirit
/post/1514750
:D
-
I carry my multitool in my back pocket, and for having such a complete tool set the Spirit is comparatively slim and light which makes it very comfortable to carry. I also find the butter blade to be very elegant. It is aesthetically pleasing to me and I prefer it to the blade in the X model.
-
Aesthetics. Tool density. Ergonomics. I especially like the plier head bluntish tip. There is no question this tool reeks quality. The tool selection and density is wonderful. I like having outside accessible tools. When you select a tool and open it there is no clumping which seems like a small thing but really isn't. If you love SAKs then you'll LOVE the Spirit.
Many have had other MTs then finally got a Spirit only to abandon their previously used MTs. To many this tool represents as close to MT perfection as they come. I have nothing but praise for this and the bigger brother the Swisstool.
-
I agree with 50 on every thing he had to say about the Spirit, and would say the same plus for the Swisstool.
On the other hand I must take exception to the comments of Ducttape with reguards to the Swisstool. I primarily work on commercial hot food equipment, greasy, oily, gritty, and carbon covered equipment. The Swisstool is my single most used hand tool, only exceded by my multi-meter. For some reason I don't realy care for that shocking sensation from a live circuit. :ahhh
I personaly have never had a problem with the precision of the Swiswstool being hard to hold or otherwise. I to came to the plier based MT via Leatherman, but after breaking the handles of three Waves just below the pivot point in one year I happened upon the Swisstool. The Lm's all broke under what I consider to be "normal" use. To be fair to LM I have broken a blade on my Swisstool, but that was absolutly abuse and not "normal" use. Yes I admit I abuse my Swisstool. I can not speek for how the Spirit handles under the greasy etc... conditions as it is a lighter tool than the Spirit and being so I would not put it through the abuse of what my job requires. Even being a lighter tool I belive it superior to the Wave and most if not all LM products.
**When is the last time you saw actual rust on a SAK. **
Ok I've said enough.Mappy MT's to all.
Last Sunday on Al's Spirit
/post/1514750
:D
"When is the last time you saw actual rust on a SAK. [/b]
Ok I've said enough."And the follow up statement in the same above linked Post....
50ft-trad......
Re: Victorinox spirit X size help
« Reply #25 on: July 17, 2017, 02:02:12 AM »
All it took to shift it was a small pinch of brasso metal polish wadding. The corrosion was very superficial, suck that I'm wondering if indeed it was fragments of other metal (similar to what Mechanickal said). Either way, it seems to be clear now, so we're back to how we should be ;) -
Many things have been said, I won't repeat them, but let me add this
Form Factor:
The Spirit is longer and thinner when compared to others. The result is that- that, combined with its smoothness (no sharp corners on a Spirit) makes it rides much more comfortable in your pants.
- all the small tools (screwdriver, prytool etc...) are longer and have better reach.
I carry a spirit with me every day and I never notice it there. The Signal on the other hand (the only similar sized MT I have carried for a while) was a lot more noticeable.
-
@Etherealicer said:
Many things have been said, I won't repeat them, but let me add thisForm Factor:
The Spirit is longer and thinner when compared to others. The result is that- that, combined with its smoothness (no sharp corners on a Spirit) makes it rides much more comfortable in your pants.
- all the small tools (screwdriver, prytool etc...) are longer and have better reach.
I carry a spirit with me every day and I never notice it there. The Signal on the other hand (the only similar sized MT I have carried for a while) was a lot more noticeable.
Have you now ditched the Signal? I thought you'd got quite enamoured by it?
-
As alot of others stated:
You'll know when you handled one...
-
@Outback in Idaho said:
what is so special about the Spirit?1 - Victorinox has the best fit and finish of any MT maker.
2 - in its class, the Swisstool Spirit packs the most tools in the least space
3 - the tools open on the outside of the MT for easy access, with the side benefit that the plier handles are smooth and comfortable.

-
@Mechanickal said:
As alot of others stated:You'll know when you handled one...
Yup. It has been my favorite since I bought it. Carrying any other MT is almost always just to switch it up for me at this point.
Edit: oh and also I will add that if you need to oho your pliers all you have to do is catch the "weird" open looking part on your belt or waistband. I do it while fishing all the time
-
and it won't rust! Perfect companion for a Spyderco Salt

-
@ThePeacent said:
and it won't rust! Perfect companion for a Spyderco Salt
Peacent, meet 50ft-trad.

</post/1514750> -
Brother 50 does acknowledge that it may be the least rust resistant MT on the market.

-
Maybe someone should bury it for a year as was done with the wave and gerber somewhere around here
-
So what do you guys think about this list?
Swisstool cons:
No lanyard ring
No pocket clip
No OHO knives or tools (other than pliers)
No operation with gloves (other than pliers)
Damage to fingernails
Not user modifiable
Not user repairable -
@aluminated said:
So what do you guys think about this list?Swisstool cons:
No lanyard ring
No pocket clip
No OHO knives or tools (other than pliers)
No operation with gloves (other than pliers)
Damage to fingernails
Not user modifiable
Not user repairableexcept it:
does have a lanyard attachment hole
knives and tools can be one hand opened
knives and tools can be used with gloves
doesn't have to trash your nails
can be modified
can be repaired -
So what do you guys think about this list?
Swisstool cons:
No lanyard ring
No pocket clip
No OHO knives or tools (other than pliers)
No operation with gloves (other than pliers)
Damage to fingernails
Not user modifiable
Not user repairableexcept it:
does have a lanyard attachment hole
knives and tools can be one hand opened
knives and tools can be used with gloves
doesn't have to trash your nails
can be modified
can be repairedI think we have different definitions or at least different perspectives for some of those terms. :D
Don't get me wrong - I am not nagging on the Victorinox products. I love my Swisstool and check the repair status of my Spirit at least twice daily. However, some of the design choices such as the location of the lanyard hole (is that the strange slot/hole thing?) have me befuddled.
I'm sure I CAN open all the tools with a tooth too, but I'm not about to call the Spirit "OTO."
Same for the glove comment. Latex or nitrile, maybe. How about a cowhide work gauntlets?
Doesn't have to trash your nails...but probably will do some damage. I'd rather not have nail nicks for every tool, but that's personal preference, largely because I had a Swisstool with tools so hard to open that I broke a couple nails with almost every tool selection. Btw, I'm old(er.) I have very hard and strong nails.
There's nothing I could do to change that tool other than to send it away for repair so I resold it to a friend to be a user/beater. -
So what do you guys think about this list?
Swisstool cons:
No lanyard ring
No pocket clip
No OHO knives or tools (other than pliers)
No operation with gloves (other than pliers)
Damage to fingernails
Not user modifiable
Not user repairableexcept it:
does have a lanyard attachment hole
knives and tools can be one hand opened
knives and tools can be used with gloves
doesn't have to trash your nails
can be modified
can be repairedI think we have different definitions or at least different perspectives for some of those terms. :D
Don't get me wrong - I am not nagging on the Victorinox products. I love my Swisstool and check the repair status of my Spirit at least twice daily. However, some of the design choices such as the location of the lanyard hole (is that the strange slot/hole thing?) have me befuddled.
I'm sure I CAN open all the tools with a tooth too, but I'm not about to call the Spirit "OTO."
Same for the glove comment. Latex or nitrile, maybe. How about a cowhide work gauntlets?
Doesn't have to trash your nails...but probably will do some damage. I'd rather not have nail nicks for every tool, but that's personal preference, largely because I had a Swisstool with tools so hard to open that I broke a couple nails with almost every tool selection. Btw, I'm old(er.) I have very hard and strong nails.
There's nothing I could do to change that tool other than to send it away for repair so I resold it to a friend to be a user/beater.Yeah for sure. :D You didn't define the type of gloves, mods or repairs etc so I was cheeky. :kirky:
-
Again, I'm a fan of the Vics. All of the "cons" listed are far outweighed by the quality and features.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
