Will Victorinox ever...
-
Personally I would love a superior steel, easily sharpened and stainless. 154cm for example. Don't think it will every happen though. I'm very happy with that steel on my Leathermans (skeletool/charge). I do realise why Victorinox use the steel that they do. They are easy to punch out, are suitable for the vast majority of users and indeed tuned for the casual blade user. Most of all they keep the tool price as low as it is. I would love there to be an aftermarket solution though.
-
Whats wrong with the Vic steel?
Cheap.
Edge retention: Very reasonable for the price.
And when it does go blunt... You can sharpen it <u>Very</u> easily.Personally, if Vic used super steel, I would be lost. :ahhh
I have no clue how to sharpen that stuff. :ahhh
Hence, I would not use SAKs. :o :ahhh -
-
I've always wondered if you can just put the scales from that model with the clip onto other 111 mm models?
Sadly you can't. The scales don't have the recess for the corkscrew/phillips driver.
Thanks. Its obvious now that l look at it.
I've been dreaming of a an OHO Outrider with a pocket clip for a while now.
I think l once saw that Wenger had a 130 mm Ranger with a pocket clip, but I've never seen one for sale. -
'Super steels' are really not all that hard to sharpen. S35VN or M390 will sharpen up pretty easily on my Spyderco Sharpmaker for example. 154cm will sharpen up even more easily. The fact that I can sharpen my SAK by stropping it up on my chinos doesn't make more modern steels hard or impossible to sharpen. A SAK is ridiculously easy to sharpen but you pay the price with a blade that needs it far more often. Actually it doesn't due to superb geometry which keeps cutting even when far from properly sharp but in theory. :)
-
@pomsbz said:
'Super steels' are really not all that hard to sharpen. S35VN or M390 will sharpen up pretty easily on my Spyderco Sharpmaker for example. 154cm will sharpen up even more easily. The fact that I can sharpen my SAK by stropping it up on my chinos doesn't make more modern steels hard or impossible to sharpen. A SAK is ridiculously easy to sharpen but you pay the price with a blade that needs it far more often. Actually it doesn't due to superb geometry which keeps cutting even when far from properly sharp but in theory. :)Ah, thats the problem. I rarely use a blade, so I can't justify a Sharpmaker or similar. Hence, no super steels for me. :D
-
@Pablo O'Brien said:
'Super steels' are really not all that hard to sharpen. S35VN or M390 will sharpen up pretty easily on my Spyderco Sharpmaker for example. 154cm will sharpen up even more easily. The fact that I can sharpen my SAK by stropping it up on my chinos doesn't make more modern steels hard or impossible to sharpen. A SAK is ridiculously easy to sharpen but you pay the price with a blade that needs it far more often. Actually it doesn't due to superb geometry which keeps cutting even when far from properly sharp but in theory. :)
Ah, thats the problem. I rarely use a blade, so I can't justify a Sharpmaker or similar. Hence, no super steels for me. :D
I think that's the point though. Most SAK owners are probably like yourself. Hence super easy sharpening for the non blade enthusiast.
-
I ove the steel that Vic uses and hope they never change. I love that I can use the bottom of a coffee mug, soup bowl, leather belt, top of a car window, to touch up the blade. Soooo easy to sharpen.
If Vic had to change anything, I wish they would ditch the d--med cellidor handle scales for some more modern plastic that will not crack up if dropped on a hard surface, or melt if comes in contact with bug repellent or gun solvents. Get rid of the cellidor and keep the steel!
-
@Pablo O'Brien said:
'Super steels' are really not all that hard to sharpen. S35VN or M390 will sharpen up pretty easily on my Spyderco Sharpmaker for example. 154cm will sharpen up even more easily. The fact that I can sharpen my SAK by stropping it up on my chinos doesn't make more modern steels hard or impossible to sharpen. A SAK is ridiculously easy to sharpen but you pay the price with a blade that needs it far more often. Actually it doesn't due to superb geometry which keeps cutting even when far from properly sharp but in theory. :)
Ah, thats the problem. I rarely use a blade, so I can't justify a Sharpmaker or similar. Hence, no super steels for me. :D
I think that's the point though. Most SAK owners are probably like yourself. Hence super easy sharpening for the non blade enthusiast.
Joe average guy will also just buy a new SAK if his old one gets dull. I swear I read a poll or survey somewhere that concluded as much.
-
@Pablo O'Brien said:
'Super steels' are really not all that hard to sharpen. S35VN or M390 will sharpen up pretty easily on my Spyderco Sharpmaker for example. 154cm will sharpen up even more easily. The fact that I can sharpen my SAK by stropping it up on my chinos doesn't make more modern steels hard or impossible to sharpen. A SAK is ridiculously easy to sharpen but you pay the price with a blade that needs it far more often. Actually it doesn't due to superb geometry which keeps cutting even when far from properly sharp but in theory. :)
Ah, thats the problem. I rarely use a blade, so I can't justify a Sharpmaker or similar. Hence, no super steels for me. :D
I think that's the point though. Most SAK owners are probably like yourself. Hence super easy sharpening for the non blade enthusiast.
Joe average guy will also just buy a new SAK if his old one gets dull. I swear I read a poll or survey somewhere that concluded as much.
Aw geez. Thats like throwing the car away when the tires wear out.
-
I think that's the point though. Most SAK owners are probably like yourself. Hence super easy sharpening for the non blade enthusiast.
Joe average guy will also just buy a new SAK if his old one gets dull. I swear I read a poll or survey somewhere that concluded as much.
I doubt he'd do so if the knife had the price which inevitably follows a steel which is more expensive to buy, and more expensive to machine, heat treat and grind. Then he'd simply use a blunt knife. It is utterly astonishing what people are willing to use. I am a lazy guy, so I wait too long sharpening a knife, but what Joe Average Guy does is simply scary.
-
Or never changing the oil?
https://www.reddit.com/r/pics/comments/51l80h/audi_tt_after_135000_kilometers_without_an_oil/
Sorry, I thought that the pic in link was crazy and wanted to show you all. -
I think that's the point though. Most SAK owners are probably like yourself. Hence super easy sharpening for the non blade enthusiast.
Joe average guy will also just buy a new SAK if his old one gets dull. I swear I read a poll or survey somewhere that concluded as much.
I doubt he'd do so if the knife had the price which inevitably follows a steel which is more expensive to buy, and more expensive to machine, heat treat and grind. Then he'd simply use a blunt knife. It is utterly astonishing what people are willing to use. I am a lazy guy, so I wait too long sharpening a knife, but what Joe Average Guy does is simply scary.
I used to work with a guy who kept his knife dull bc he was "afraid he would cut himself". I then proceeded to explain that more people are injured by dull knives than sharp ones.
"But I might cut myself" he replied.
I walked away and carried a few extra band-aids from there on out. [emoji849]
Sent from my iPhone using Tapatalk
-
@Pablo O'Brien said:
Or never changing the oil?
https://www.reddit.com/r/pics/comments/51l80h/audi_tt_after_135000_kilometers_without_an_oil/
Sorry, I thought that the pic in link was crazy and wanted to show you all.
-
@pomsbz said:
I think that's the point though. Most SAK owners are probably like yourself. Hence super easy sharpening for the non blade enthusiast.I know you didn't mean to sound condescending when you said that, but I'd like to point out that not all blade enthusiasts are steel enthusiasts.
While working my way through college one of my jobs was as a meatcutter for a steak restaurant. While doing that job I gained a real appreciation for a blade that could be made very sharp with minimal effort and touched up quickly so I could get back to work. The vast majority of people who actually make their living using knives (i.e. the real "serious knife users") feel the same way.
I do have a couple of fixed blade knives made of more exotic steels, but VG-10 is as high up the modern steel ladder I'll go for the folders I actually carry. It's a choice I made consciously, not out of ignorance.
Whenever I see someone "testing" their S110V knife on 500 linear feet of cardboard, I think to myself, "Dude, buy a box cutter."
I'm not saying those who would like a super steel on their SAK are wrong, but we all know it isn't going to happen in the Victorinox factory. Fortunately, there are some gifted guys out there (like Syph) who can make marvelous things happen.
Have any steel enthusiasts approached third-party makers about getting replacement blades made?
-
@pomsbz said:
'Super steels' are really not all that hard to sharpen. S35VN or M390 will sharpen up pretty easily on my Spyderco Sharpmaker for example. 154cm will sharpen up even more easily. The fact that I can sharpen my SAK by stropping it up on my chinos doesn't make more modern steels hard or impossible to sharpen. A SAK is ridiculously easy to sharpen but you pay the price with a blade that needs it far more often. Actually it doesn't due to superb geometry which keeps cutting even when far from properly sharp but in theory. :)I have a few steels and my take is similar as ^^^. Just for clarity, when my edge is no longer performing as I expect then what I do is strop. If I've used the knife and rolling or micro edge issued have occurred then I will use a ceramic rod then strop. I did have chips that needed more than what I have described.
My point is, maintaining an edge of "super" or "higher" end steels would be <<similar>> to what most do on their SAKs IMO. Strop, or ceramic rod.
It might very well be my take on things.
Now re-profiling say S30V for the true novice with little to no gear is a whole other conversation.
-
I think that's the point though. Most SAK owners are probably like yourself. Hence super easy sharpening for the non blade enthusiast.
I know you didn't mean to sound condescending when you said that, but I'd like to point out that not all blade enthusiasts are steel enthusiasts.
While working my way through college one of my jobs was as a meatcutter for a steak restaurant. While doing that job I gained a real appreciation for a blade that could be made very sharp with minimal effort and touched up quickly so I could get back to work. The vast majority of people who actually make their living using knives feel the same way.
I do have a couple of fixed blade knives made of more exotic steels, but VG-10 is as high up the modern steel ladder I'll go for the folders I actually carry. It's a choice I made consciously, not out of ignorance.
Whenever I see someone "testing" their S110V knife on 500 linear feet of cardboard, I think to myself, "Dude, buy a box cutter."
:D
-
I would say most knife owners don't sharpen their knives, and most of those who do, have no idea what the hell they are doing. A lot will use one of the pull through kitchen sharpeners.A friend's father sounded very proud when he said he keeps his knife (Climber) sharp on an oilstone. The edge was dull, chipped, and the included angle was almost certainly over 60 degrees.
I confiscated it for an hour or so, replaced the cracked scales with plus scales with all the accessories, and properly sharpened both blades. It took several passes through an edge sharp with the green belt to get anywhere close to the proper profile. I finished the edge with a diamond steel to put a bit of bite on it, and he said he didn't realise the knives could take such a good edge. ::)
The next time I saw him use it, he was slicing through electrical cable which was resting on a steel surface...

Sometimes it's just not worth the effort ...
-
@Pablo O'Brien said:
Whats wrong with the Vic steel?
Cheap.
Edge retention: Very reasonable for the price.
And when it does go blunt... You can sharpen it <u>Very</u> easily.Personally, if Vic used super steel, I would be lost. :ahhh
I have no clue how to sharpen that stuff. :ahhh
Hence, I would not use SAKs. :o :ahhh**
Nobody said there was anything wrong with Vic's current steel. Just posed the question if they'd ever make a pocket knife with "better" steel.. ;)**
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
