Rusting leathermans
-
What I meant by weaker is that it will loose its edge quicker than a higher carbon steel. I should have added that it also makes it easier to sharpen and get a serviceable edge back on it. As I carry a Spyderco with a S30V blade for any cutting I need to do I only use a multi's blade for jobs I am unwilling to risk my Spyderco on and have found that to work for me.
Dave
-
I had a leather man super tool 7 or 8 years ago (i,m now thirty so the memory plays tricks on me
) and that rusted very quickly, never serious rust just, surface corotion. although it was pitted on the tangs and by the pivots, no matter how well i cleaned them :'(I do look after my tools but it was kinda of excessive the amount of care i was giving the lm supertool, especially as it was suposed to be stainless!
i sold it in the end and went back to saks and then got a swisstool x which i,ve got to say is a vast improvement in every area (I,ll run for cover now before i start a flame war
) -
Hehe, no need for a flame war, as you yourself have admitted (or thats what I have understood from your post anyway, forgive me if Im wrong), you have not sampled a leatherman since your supertool, so you have not been able to compare your swisstool to any of the newer leatherman offerings.
That's not to say you might not find it superior in every way, but right now I think most will take that as an uninformed opinion ;)
I think its healthy for people to be able to express their opinions openly in a forum, or any kind of dialogue without worry of attack, of course as long as they do so in a sensitive way, i.e. not trying to hurt people's feelings deliberately.
-
@Raukodur said:
...Therefore, in this thread, if you own a leatherman of any kind, or did in ther past, could you reply with a concise post where you include the following information (and anything else pertinent I might have forgotten to mention):- type of leatherman tool you owned (and whether it was black oxide coated or not)
- whether it rusted or not
- if it did, how long since you bought it it took to rust
- what kind of conditions you exposed it to (whether it rusted or not)
- how the rusting affected the tool
So micky d, going back to the very first post in this thread, what can you tell us about your Leatherman?
-
I have rusty bloomers :'(
-
...Therefore, in this thread, if you own a leatherman of any kind, or did in ther past, could you reply with a concise post where you include the following information (and anything else pertinent I might have forgotten to mention):
- type of leatherman tool you owned (and whether it was black oxide coated or not)
- whether it rusted or not
- if it did, how long since you bought it it took to rust
- what kind of conditions you exposed it to (whether it rusted or not)
- how the rusting affected the tool
So micky d, going back to the very first post in this thread, what can you tell us about your Leatherman?
Ok i used to carry my lm supertool paired with either a spyderco or cold steel 3inch folder, so i always had a good balance of tools to get me through the day.
at the time i was heavily in motorbikes so the leatherman got a fair bit of use in all weather, pulling fuses, bodging electrics
(good old days when all my bikes were crap!)Having said that i always dryed/cleaned and oiled when neccasary, but the uk,s a damp old place so i guess i can be forgiven for a few odd pitts here and there.
the rusting never inhibbited the working of the tool, what finally got to me in the end was the stupid locking system of pulling one blade out to put the other one away, try doing that in sub zero tempretures in the dark with painfully numb fingers

so in the end i got rid of it and went back to carrying normal pliers and a sak, which served me much better in the end, then a mate of mine showed me his swisstool, (after a long time being put of multi tools by my Leatherman Supertool) and i was sold!

and to this day i still think its the finest all round multi tool for me.
but each to there own and there are a lot of multi tools leatheman included that i,d hapilly own these days

-
Well said!

-
Hi all!
I've enjoyed reading this forum for a while and appreciated all the information I've gathered. I figured this was a good place to start by "giving back" some info.-
type of leatherman tool you owned (and whether it was black oxide coated or not)
-
whether it rusted or not
-
if it did, how long since you bought it it took to rust
-
what kind of conditions you exposed it to (whether it rusted or not)
-
how the rusting affected the tool
-
Original PST
-
Some rust spots, nothing that affected the tool much: easily cleanable
-
Well... see 4
-
My sisters originally found this thing in the snow about 10 years ago while they were sledding. Then I ended up with it (my first multitool came free
) No idea how long it had been there. Since then its been indoors, but I didn't take care of it (oil, cleaning, etc.) till a few years ago. -
Not at all really.
-
Charge Ti
-
A few drity/rusty spots here and there where my normal cleaning doesn't clean.
-
I've been out of the country for 6 months, and it sat in a damp basement. I think the little bit of rust I saw appeared during that time.
-
A lot of pocket time, some sitting, some basement time.
-
None
-
Kick
-
A few tiny surface spots that wiped off easily.
-
After being carried/used for a few months.
-
A lot of pocket time and abuse at work. I opened a can of pinaples and ate it with the screwdriver. :D
-
None
-
Juice KF4 #1
-
Same as Kick, I think only on the philips.
-
After being carried/used for a few months.
-
I have been in Central Asia for the past 6 months, and this was the tool I carried all the time. Things over there don't work as well as they do here, so this sucker got used for just about everything without a whole lot of upkeep.
-
None
-
Juice KF4 #2
-
None
-
na
-
It's sat in a box since I got it.
-
na
-
Micra
-
Some rust on inside parts
-
Came that way, I bought it very used on ebay
-
I have no idea, but it sure looks like it went through a lot with no upkeep.
-
Not much
-
Knife: e304x
-
No
-
na
-
Indoors, well oiled. Used to open letters.

-
na
That's it! Hope it was helpful.
Edited to say: none were black-coated.
-
-
Welcome NeitherExtreme!
Well, it sounds like you’ve spent a bit of time with the whole spectrum of Leatherman products. I especially liked the story of the PST found by your sisters outside in the snow. Seems like that would be a pretty good corrosion test right there! :)
-
Like alot of you, I've owned my LM for a while before it started rusting at all. I have been carrying my LM Wave, on and off, for about three years. I tried the Blast for a little while, but the handles and screwdrivers always bent all out of shape when used heavily, so I'e since gone back to my beloved Wave, and other then some really light rusting in spots where cleaning is hard to do, and occasionally some specks of rust on the serrated blade and scissors, it has held up good. It took about a year and a half for me to see ANY rust on it, and that's working here in Florida, where it's hot and humid. I work in perfect rust-inducing conditions, yet any rust that has appeared I've been able to simply wipe away with a dry finger. Like I said, not bad at all. My Blast, although not carried for long, didn't rust either. I think, as has also been posted elsewhere in this thread, the reputation LMs have aquired over the years as far as rust is concerned is exaggerated. I've had my Wave in my pocket on it's clip on hundred degree days, absorbing all my sweat through my jeans, I've been in chest deep water with it on a sheath on my side, not attended to until later at night, I've dropped it in sandy, salty water, had it rained on, had it submerged in some nasty, fishy water (I was laying on my side in a canoe pulling dead fish out of the water, putting them in our boat, which had about 6 inches of fish guts and water in it) and it still looks great. Nicks and scratches from use, of course, but hardly ANY rust. As a matter of fact, the only rust it has at this precise moment is behind the scissor spring, which I can't get to, and it's very minor. My Wave is a kick ass, easily accessed, abuse taking, Rust repelling, hard working tank. No worries.
-
Arghh! Rust is developing on my Leatherman Juice Pro, underneath the clear plastic piece that holds the tweezers, so i cannot get to it. >:(


-
That'll be a tough fix :-\
I'm sure Bob or Dave will have a solution though :)
-
I buy most of my Leathermans brand spankin new unless i get a heck of a deal. My new model wave i edc gets sweaty handed ever day but i soak it in wd-40 and remington gun oil every weekend to keep rust away.
The only Leatherman rust issue i have is my 10 dollar second hand Crunch. It has a couple of rust stains on the plier heads due to being in a glass case that had a bit of condensation build up when i bought it.
- type of leatherman tool you owned (and whether it was black oxide coated or not) Crunch--not BO
- whether it rusted or not--yes
- if it did, how long since you bought it it took to rust---rusted when i got it due to poor ventilation and high humidity
- what kind of conditions you exposed it to (whether it rusted or not)--now it's being soaked in 5w30...then remington gun oil with teflon
- how the rusting affected the tool----not gonna lie....it bothers me more than the tool...but i'm a bit of a clean freak.


-
@Micky d said:
That'll be a tough fix :-\I'm sure Bob or Dave will have a solution though :)
That's going to be a bugger to get at that is. How long has it been there Stormdrane? If it's still sitting on the surface, you might be able to scratch it away with a razor blade or similar. It looks as though you can list the plastic bit just about enough to get in there on the blade side, but mine is really tight on the driver side.
Bummer.
-
I just noticed it when I went to blow out all the pocket lint and dust before I give it the usual wipe down with Tuf-glide, so it may have just taken hold within the last few weeks. I've carried/used it more than any of my other multitools, since I bought it new five years ago and usually keep the rust at bay despite the perspiration/condensation bath it gets in my pocket.
I did try to get a utility razor blade in between the plastic and body, but it's a no go with the tight fit as the plastic piece doesn't want to budge and I didn't want to put any more force that might break it... :( I know it's hard to stop rust once it gets a foothold.
-
Tuf Glide is amazing right? Finally someone on here uses it! :D
-
@Leatherman123 said:
Tuf Glide is amazing right? Finally someone on here uses it! :DI've been using Tuf-Glide for years and it's worked great. I guess the rust is my fault for not looking more closely for it and letting routine maintenance/cleaning slide for too long. I thoroughly sloshed it with the stuff this time, so hopefully it'll halt any spread of the rust. It does bug me that I can't get at it though while I can see it...
-
@Stormdrane said:
Arghh! Rust is developing on my Leatherman Juice Pro, underneath the clear plastic piece that holds the tweezers, so i cannot get to it. >:(

You could try dipping it in kerosene overnight but you have to say goodbye to the color on the scales.
-
Or remove the scales :D
-
The rusty S2 that Grant has use to be mine. That rust happened because it was carried in my pocket down here in the humid south, just happens down here I guess. I went and checked my LM's for rust and I don't see a whole lot. There are dots here and there on my LM's but nothing that cannot be removed by a fine steel wool. Most of my rust appears as a discoloring on the handles. Because of the finish on LM handles the rust finds it's way into the fine surface and give some of my handles a brown hue if you look at the right. Right now my Surge shows the most rust on the outside of the handles. All in all even though I live in a humid enviroment the tools hold up pretty good.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login