Will Victorinox ever...
-
@Pablo O'Brien said:
Whats wrong with the Vic steel?
Cheap.
Edge retention: Very reasonable for the price.
And when it does go blunt... You can sharpen it <u>Very</u> easily.Personally, if Vic used super steel, I would be lost. :ahhh
I have no clue how to sharpen that stuff. :ahhh
Hence, I would not use SAKs. :o :ahhh**
Nobody said there was anything wrong with Vic's current steel. Just posed the question if they'd ever make a pocket knife with "better" steel.. ;)** -
@Pablo O'Brien said:
Whats wrong with the Vic steel?
Cheap.
Edge retention: Very reasonable for the price.
And when it does go blunt... You can sharpen it <u>Very</u> easily.Personally, if Vic used super steel, I would be lost. :ahhh
I have no clue how to sharpen that stuff. :ahhh
Hence, I would not use SAKs. :o :ahhh**
Nobody said there was anything wrong with Vic's current steel. Just posed the question if they'd ever make a pocket knife with "better" steel.. ;)**Why?
If there's nothing wrong with my car, I'm not replacing it with something "better"In the end I'll get from point A to B just as easy, only more stylish and at a higher price :D
-
@50ft-trad said:
I would say most knife owners don't sharpen their knives, and most of those who do, have no idea what the hell they are doing. A lot will use one of the pull through kitchen sharpeners.A friend's father sounded very proud when he said he keeps his knife (Climber) sharp on an oilstone. The edge was dull, chipped, and the included angle was almost certainly over 60 degrees.I confiscated it for an hour or so, replaced the cracked scales with plus scales with all the accessories, and properly sharpened both blades. It took several passes through an edge sharp with the green belt to get anywhere close to the proper profile. I finished the edge with a diamond steel to put a bit of bite on it, and he said he didn't realise the knives could take such a good edge. ::)
The next time I saw him use it, he was slicing through electrical cable which was resting on a steel surface...

Sometimes it's just not worth the effort ...
Ha ha, a couple of posts in this thread are giving me a good laugh, the "Dude, get a box cutter" and this one from 50ft-trad about cutting cable on a steel surface, awesome!
Honestly, this is reason why the drag through sharpeners are worth it for some people. Heck, I'll confess to having an accu sharp out in the garage and I've used it before. (I now have some ceramic rods which seem to do a very nice job). But yes, if someone is abusing the blade to such a degree and just wants a quick edge to batter some more why not a drag through sharpener?
Anyhow, I know very little about differing types of steel but I will say Victorinox seems on the soft side to me. When I found or re purposed the old deluxe tinker from my grandpa I noticed the blade tip had a slight bend to it. I'm thinking this is better than being brittle and breaking and also, wow, it really does seem to sharpen quickly and well. -
@Pablo O'Brien said:
Whats wrong with the Vic steel?
Cheap.
Edge retention: Very reasonable for the price.
And when it does go blunt... You can sharpen it <u>Very</u> easily.Personally, if Vic used super steel, I would be lost. :ahhh
I have no clue how to sharpen that stuff. :ahhh
Hence, I would not use SAKs. :o :ahhh**
Nobody said there was anything wrong with Vic's current steel. Just posed the question if they'd ever make a pocket knife with "better" steel.. ;)**Why?
If there's nothing wrong with my car, I'm not replacing it with something "better"In the end I'll get from point A to B just as easy, only more stylish and at a higher price :D
Simple answer. Options.
Obviously Victorinox likes offering options lol with their dozens and dozens of knife selections.

-
High edge retention is but one of the desired properties in a knife steel. Victorinox uses a good steel with good properties for daily use.
-
For $5 you can get a Smith's Pocket Diamond Retractable Sharpener that will sharpen any of the super steels. I'd be fine with a harder Vic steel but only if it could be made and used without issues in the current blade profile of their pocket knives. If in that profile the blade was prone to rusting, cracking or chipping, no thanks. I'm quite happy with the steel they use now.
-
@Pablo O'Brien said:
Whats wrong with the Vic steel?
Cheap.
Edge retention: Very reasonable for the price.
And when it does go blunt... You can sharpen it <u>Very</u> easily.Personally, if Vic used super steel, I would be lost. :ahhh
I have no clue how to sharpen that stuff. :ahhh
Hence, I would not use SAKs. :o :ahhh**
Nobody said there was anything wrong with Vic's current steel. Just posed the question if they'd ever make a pocket knife with "better" steel.. ;)**Why?
If there's nothing wrong with my car, I'm not replacing it with something "better"In the end I'll get from point A to B just as easy, only more stylish and at a higher price :D
Simple answer. Options.
Obviously Victorinox likes offering options lol with their dozens and dozens of knife selections.

They do indeed make dozens of options available...as long as they fit within their current, highly refined manufacturing process.
With that said, they are willing to modify these processes to produce their Damascus limited editions, so perhaps there is a teeny-tiny chance...
While I'm a non-steel-enthusiast knife enthusiast, I can respect those whose opinions differ from mine. I don't find a harder, tougher steel to be "better" for my purposes, but your mileage may vary.
I do, however, wonder if the SAK fans of the world are ready for a $400 Tinker in CPM S90V. ;)
-
From "Meet Sandvik 2/99":
"Cutting argument from Sandvik. Swiss company Victorinox, which produces the world-renowned Swiss Army Knife, is an important Sandvik Steel customer. Victorinox purchases specially developed cutlery steel with properties that match the company’s extremely high quality requirements in terms of the steel’s chemical composition, mechanical properties and thickness tolerances. It becomes rapidly evident that the only very best is good enough for this leading Swiss manufacturer when, for example, you study the most advanced
product in the Victorinox range, a pocket knife with 33 different functions and an optimal finish."Vic makes lot of different types of knives. The cheapest way is to use a minimum of steel types for a maximum of purposes. The iron files of the pocket knives have other specs than its cutting blades. Maybe other tools, for example the siccors, also have different specs.
Metallurgy is a real science (of which I have no knowledge). -
@an0nemus said:
Will Victorinox ever...put pocketclips on their medium to large size knives?
Don't get me wrong, but i absolutely abominate pocket clips on pocket knives, especially on sak's
. Even less if anyone from Vic ever had that idea for my beloved 91mm/84mm. :ahhh
I think it absolutely ruins a Sak look and elegance, or any elegant pocket knife for that mater IMHO. It may be practical on multi's or tactical knives (not that i like the look either way), but if they put it in, i hope they'll only do it on 111mm up. -
Will Victorinox ever...put pocketclips on their medium to large size knives?

Don't get me wrong, but i absolutely abominate pocket clips on pocket knives, especially on sak's
. Even less if anyone from Vic ever had that idea for my beloved 91mm/84mm. :ahhh
I think it absolutely ruins a Sak look and elegance, or any elegant pocket knife for that mater IMHO. It may be practical on multi's or tactical knives (not that i like the look either way), but if they put it in, i hope they'll only do it on 111mm up.Agree with you. Only on the bigger SAKs and only as detachable options, like with other multitools
-
Hmm. Not really supersteel but id like the blade steel on a spyderco salt or something similar to be used with a sak. I'd like to bring my saks on the beach or on the boat pre-dive since its definitely handy. Granted i wont wet the sak in salt water but the rust from just the exposure is kinda bad and i dont typically wash saks since i cant open it up as i please. I guess having a maintenance free sak is a good step.
-
@carboncopy101 said:
Hmm. Not really supersteel but id like the blade steel on a spyderco salt or something similar to be used with a sak. I'd like to bring my saks on the beach or on the boat pre-dive since its definitely handy. Granted i wont wet the sak in salt water but the rust from just the exposure is kinda bad and i dont typically wash saks since i cant open it up as i please. I guess having a maintenance free sak is a good step.Isn't it so that the steel itself is fairly unaffected by salt water, but the alox liners suffer?
-
Hmm. Not really supersteel but id like the blade steel on a spyderco salt or something similar to be used with a sak. I'd like to bring my saks on the beach or on the boat pre-dive since its definitely handy. Granted i wont wet the sak in salt water but the rust from just the exposure is kinda bad and i dont typically wash saks since i cant open it up as i please. I guess having a maintenance free sak is a good step.
Isn't it so that the steel itself is fairly unaffected by salt water, but the alox liners suffer?
All the corroded SAKs I've seen, the liners were in bad shape, rivets too, but the tools pristine.
Better steel wouldn't help here. -
I can't really understand what would different fancier steels would bring in added value and functionality to regular (pocket) SAK use....
At least to my view of what a sak is for, and how it's meant to be...
-
@Pablo O'Brien said:
Hmm. Not really supersteel but id like the blade steel on a spyderco salt or something similar to be used with a sak. I'd like to bring my saks on the beach or on the boat pre-dive since its definitely handy. Granted i wont wet the sak in salt water but the rust from just the exposure is kinda bad and i dont typically wash saks since i cant open it up as i please. I guess having a maintenance free sak is a good step.
Isn't it so that the steel itself is fairly unaffected by salt water, but the alox liners suffer?
All the corroded SAKs I've seen, the liners were in bad shape, rivets too, but the tools pristine.
Better steel wouldn't help here.To all people working in salty conditions:
Buy a golden Climber 2016.
It costs more since it's limited edition, but has nickel silver liners instead of alox. -
@Pablo O'Brien said:
Hmm. Not really supersteel but id like the blade steel on a spyderco salt or something similar to be used with a sak. I'd like to bring my saks on the beach or on the boat pre-dive since its definitely handy. Granted i wont wet the sak in salt water but the rust from just the exposure is kinda bad and i dont typically wash saks since i cant open it up as i please. I guess having a maintenance free sak is a good step.
Isn't it so that the steel itself is fairly unaffected by salt water, but the alox liners suffer?
All the corroded SAKs I've seen, the liners were in bad shape, rivets too, but the tools pristine.
Better steel wouldn't help here.To all people working in salty conditions:
Buy a golden Climber 2016.
It costs more since it's limited edition, but has nickel silver liners instead of alox.And since the tools never corrode... You will have an uncorrodable SAK!

-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=carboncopy101 link=topic=73115.msg1521302#msg1521302 date=1500951657]
Hmm. Not really supersteel but id like the blade steel on a spyderco salt or something similar to be used with a sak. I'd like to bring my saks on the beach or on the boat pre-dive since its definitely handy. Granted i wont wet the sak in salt water but the rust from just the exposure is kinda bad and i dont typically wash saks since i cant open it up as i please. I guess having a maintenance free sak is a good step.Isn't it so that the steel itself is fairly unaffected by salt water, but the alox liners suffer?
All the corroded SAKs I've seen, the liners were in bad shape, rivets too, but the tools pristine.
Better steel wouldn't help here.To all people working in salty conditions:
Buy a golden Climber 2016.
It costs more since it's limited edition, but has nickel silver liners instead of alox.And since the tools never corrode... You will have an uncorrodable SAK!

[/quote]
-
@shamus said:
I'm fine with the steel quality too, not too brittle, not hard to sharpen, and completely rustproof.
Nailed it. Vic steel does it what's is supposed to do: highly rust resistant, easy to sharpen, not too brittle or soft.
So rust resistant that the aluminium liners will rust away long before.

-
Regarding corrosion of the liners on the beach: Steel blade + aluminum liners + <u>*salt *</u>water (an electrolyte) = galvanic corrosion.
But odds are that the aluminum liners should be fine if you're not in a marine environment,
Or get yourself a custom SAK with a different liner material: brass, Ti, nickel silver , etc ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login