Will Victorinox ever...
-
Hmm. Not really supersteel but id like the blade steel on a spyderco salt or something similar to be used with a sak. I'd like to bring my saks on the beach or on the boat pre-dive since its definitely handy. Granted i wont wet the sak in salt water but the rust from just the exposure is kinda bad and i dont typically wash saks since i cant open it up as i please. I guess having a maintenance free sak is a good step.
Isn't it so that the steel itself is fairly unaffected by salt water, but the alox liners suffer?
Not really familiar with steels and metallurgy but is it possible to transfer the materials or treatment to not just the tools part?
-
Hmm. Not really supersteel but id like the blade steel on a spyderco salt or something similar to be used with a sak. I'd like to bring my saks on the beach or on the boat pre-dive since its definitely handy. Granted i wont wet the sak in salt water but the rust from just the exposure is kinda bad and i dont typically wash saks since i cant open it up as i please. I guess having a maintenance free sak is a good step.
Isn't it so that the steel itself is fairly unaffected by salt water, but the alox liners suffer?
Not really familiar with steels and metallurgy but is it possible to transfer the materials or treatment to not just the tools part?
You mean coat the aluminium in chrome?

Whatever material the liners are made of, it has to be softer than the tools so that the action is smooth -
Not coating or electroplating but creating another alloy for the liners? I see haha never really thought about it hard. I guess i just want a bomb proof SAK. >:D
-
Beachcomber carry. :D
Prime example!


The Spydie has also survived multiple dishwasher cycles.

-
@carboncopy101 said:
Not coating or electroplating but creating another alloy for the liners? I see haha never really thought about it hard. I guess i just want a bomb proof SAK. >:DThey can use whatever liner materials they want, but they chose to use what will make the knife affordable for the masses. There are very few people who would be prepared to pay for knives in exotic materials - this is where the modders have their opportunity. Victorinox produce in enormous quantities which is what helps keep their costs down. They are not going to produce knives in enormous quantities that are too expensive for the average punter to buy. That is a recipe for disaster.
If you want a £20 knife, get a standard Victorinox. Yes, the liners will suffer if you don't look after it. It's a £20 knife!
If you want a non-standard knife, speak to Syph.
If you want Victorinox to put together some supersteel bladed, totally corrosion proof, titanium scaled, pocket clipped, OHO diving knife with GPS and espresso maker at an affordable price ... keep dreaming
-
@50ft-trad said:
Not coating or electroplating but creating another alloy for the liners? I see haha never really thought about it hard. I guess i just want a bomb proof SAK. >:D
They can use whatever liner materials they want, but they chose to use what will make the knife affordable for the masses. There are very few people who would be prepared to pay for knives in exotic materials - this is where the modders have their opportunity. Victorinox produce in enormous quantities which is what helps keep their costs down. They are not going to produce knives in enormous quantities that are too expensive for the average punter to buy. That is a recipe for disaster.
If you want a £20 knife, get a standard Victorinox. Yes, the liners will suffer if you don't look after it. It's a £20 knife!
If you want a non-standard knife, speak to Syph.
If you want Victorinox to put together some supersteel bladed, totally corrosion proof, titanium scaled, pocket clipped, OHO diving knife with GPS and espresso maker at an affordable price ... keep dreaming

-
@Pablo O'Brien said:
@50ft-trad said:
Not coating or electroplating but creating another alloy for the liners? I see haha never really thought about it hard. I guess i just want a bomb proof SAK. >:D
They can use whatever liner materials they want, but they chose to use what will make the knife affordable for the masses. There are very few people who would be prepared to pay for knives in exotic materials - this is where the modders have their opportunity. Victorinox produce in enormous quantities which is what helps keep their costs down. They are not going to produce knives in enormous quantities that are too expensive for the average punter to buy. That is a recipe for disaster.
If you want a £20 knife, get a standard Victorinox. Yes, the liners will suffer if you don't look after it. It's a £20 knife!
If you want a non-standard knife, speak to Syph.
If you want Victorinox to put together some supersteel bladed, totally corrosion proof, titanium scaled, pocket clipped, OHO diving knife with GPS and espresso maker at an affordable price ... keep dreaming

I would settle for 91mm alox with backtools though.

-
@50ft-trad said:
Not coating or electroplating but creating another alloy for the liners? I see haha never really thought about it hard. I guess i just want a bomb proof SAK. >:D
They can use whatever liner materials they want, but they chose to use what will make the knife affordable for the masses. There are very few people who would be prepared to pay for knives in exotic materials - this is where the modders have their opportunity. Victorinox produce in enormous quantities which is what helps keep their costs down. They are not going to produce knives in enormous quantities that are too expensive for the average punter to buy. That is a recipe for disaster.
If you want a £20 knife, get a standard Victorinox. Yes, the liners will suffer if you don't look after it. It's a £20 knife!
If you want a non-standard knife, speak to Syph.
If you want Victorinox to put together some supersteel bladed, totally corrosion proof, titanium scaled, pocket clipped, OHO diving knife with GPS and espresso maker at an affordable price ... keep dreaming
That is true. Also the cost won't really be hmm, big? In some ways a sak is modular even making new scale designs that provide new use would be good and i doubt it would cause victorinox a lot of loss. victorinox should continue to innovate and introduce new stuff to their products, i believe that's why they're taking a survey.
They did the altimeter and electronic parts is cheap now and adding gps to the scales is curiously fun haha. A smart SAK would be interesting. And considering it's victorinox it should be good.
-
@50ft-trad said:
Not coating or electroplating but creating another alloy for the liners? I see haha never really thought about it hard. I guess i just want a bomb proof SAK. >:D
They can use whatever liner materials they want, but they chose to use what will make the knife affordable for the masses. There are very few people who would be prepared to pay for knives in exotic materials - this is where the modders have their opportunity. Victorinox produce in enormous quantities which is what helps keep their costs down. They are not going to produce knives in enormous quantities that are too expensive for the average punter to buy. That is a recipe for disaster.
If you want a £20 knife, get a standard Victorinox. Yes, the liners will suffer if you don't look after it. It's a £20 knife!
If you want a non-standard knife, speak to Syph.
If you want Victorinox to put together some supersteel bladed, totally corrosion proof, titanium scaled, pocket clipped, OHO diving knife with GPS and espresso maker at an affordable price ... keep dreaming
That is true. Also the cost won't really be hmm, big? In some ways a sak is modular even making new scale designs that provide new use would be good and i doubt it would cause victorinox a lot of loss. victorinox should continue to innovate and introduce new stuff to their products, i believe that's why they're taking a survey.
They did the altimeter and electronic parts is cheap now and adding gps to the scales is curiously fun haha. A smart SAK would be interesting. And considering it's victorinox it should be good.
As far as i'm concerned they can change or innovate all they want, as long as they also keep producing the classic Sak models i love in the same way and unchanged, i'm all good...

"If it ain't broken don't fix it..." Create new, but leave the old alone
-
H1 (Spyderco Salts) and Victorinox's steels are my two absolute favorite, because both
- are easy to sharpen, a ceramic, diamond or most abrasives will do
- they won't rust, and you can put them in the dishwasher, carry them through a river or use under the rain without problems
- both will bend rather than chip, and that's better as I often hit really hard stuff or cut touching super-dulling things, in that case a bent edge is way easier and faster to bring back to functional
- not only do they sharpen easily, but they do so to a screaming sharp edge. I can shave with them -from being really dull- in a matter of seconds with a few swipes or passes
- are affordable, much more than most other steels out there

-
bring back the Bail....

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
