leatherman vs. the rest...
-
I think the bottom line is that any tool can rust if not regularly maintained.
I personally have found more rust on second hand SAK's than I have with my Leatherman's.
-
I am on my second EDC Leatherman, and it sees a lot of use and adverse conditions.. and it has no rust.
The only time I ever saw rust on my LM was with the ST200, and that was under what I would consider abuse. I had used the saw to cut both plaster and drywall, and also got quite a bit of wet spackle on it in the course of the day. I let all of that dust and gunk just sit on the saw blade, along with the spackle residue. The next day I was working around water, and the tool got good and damp. I did not use the saw again for a week or so.
When I opened the saw to use it, the spackle had dried and all the drywall and plaster dust was still on there, but in addition to that there were little rust spots over the entire saw blade. I figured I had at least marred the saw a bit, but.. I rinsed off the blade, dried it, got out some steel wool and polished it up with nary a blemish. I mean, it looked brand new.
Other than that, the only thing I have had "appear" on my LM tools is dirt, grease, and blood. Your results may vary. I wonder if the folks that see them rust maybe have them in a toolbox? Mine is always with me, so perhaps that is the difference?
-
I didn't even bother reading the replies, but I'm going to state my opinion. They are ALL great, any of the names you know are good tools, or they wouldnt still be in buisness after this long. Leatherman makes a great tool, so you won't be disappointed.
-
My observations from owning 3 leatherman's, 1 SOG, and 1 Gerber.
Leatherman VS. Gerber is no contest. After carrying the gerber tool for about 2 days I put it in a drawer.
Leatherman VS. SOG
I have EDC'd a Leatherman for the past 6 years. I also have a SOG Powerlock that stays on my tool belt at work. The compound leverage and large size make it great as it pretty much replaces a full size set of pliers. Most of the tools are good, but I think Leatherman tools are better in design and finish. The knife blows chunks and the scissors aren't much better. When I first got it I wished Leatherman manufactured the SOG design with leatherman tools inside.
The SOG is truly a badass tool, and my only complaints are more or less nitpicking.
-
I find that LM tools are the most well rounded for my needs.. I have given Vic, SOG, and Gerber a chance, but I always go back to LM tools.. If the SURGE was a SOG tool, I still think I would be a LM fan though.. I like their one handed opening tools the best... I have the Powerassist, but IMO it is a gimmick..it is extremely awkward IMO.. (but only time will tell) The Gerber 800 legend is a great MT but it doesn't have a lot of implements.. Oh, and about the rusting; I have never had a LM tool rust. I have had a SURGE on my belt in extremely wet conditions and not a single speck of rust.. I keep all my multis well maintained with tuf glide and a nice tuf cloth..
-
I have at least 12 sog tools and a handful of their knives. the scissors are the worst I have used. cutting paper, leather, and thread I found them to fold the material more than others. I also bought some hard wood and tested saws. my favorite was a the vic, next the leatherman and bear. the sog tool was the least efficient of the group. for years I prefered my swiss tool. I carried both the swiss tool and charge for a while and found that for my needs the charge was a better tool. the eye glass screw driver, neddle nose plier, pocket clip and most of all the wider opening pliers on the charge better suit my needs. I now edc the charge and have since it was realesed.
-
Every MT company has their pros and cons. SOG's biggest selling points are the compound leverage and the option to add and remove components. LM has more MT variety and their flagship models - Wave and Charge - have the ability to open blades with one hand. LM also has nicer-looking components.
It's hard to say that one brand is better than the rest because I think each brand has something positive and unique. I love my SOG but there are things that it can't do that a LM Wave or Charge can. I love the Wave/Charge but again, there are some things they can't do that a SOG can.
-
Leatherman set the standard,the rest followed!!!

-
This comes up every little while and I'm glad it does, reminds us and we get to hear some new views

All good points made so far, I nod yes and roll my eyes at the same time! :P
Personal preference is key, you like what you like and I agree, all the Big-Boys make good stuff.Leatherman makes so many models and they seem to listen to what most of us want.
Swisstool quaility is tops IMO you feel and hear it when you handle all of them.SOG compound leverage and easy tool replacement is wonderful.
Gerber..... ahh look nice and are fun! ::)
What I really like about Swisstool, SOG, and Gerber is "Lifetime Warranty!" Leatherman is 25 years :-[
and don't even tell me they are honoring it longer, it's not in writing and they can stop anytime.My Leathermans do get surface rust (pic of my Blast last week, not the first time),
but they are easy to clean and I do take care of my tools, I clean and treat them oftenl
I've never had rust problems with Swisstool or SOG.and don't get me started on LM and Gerber plastic parts!
-
After borrowing Dave's Blast, I don't think the plastic parts are that bad.
-
And I have said it before about the plastic.
GLOCK
-
Plastic, when used right, is just as durable as metal. Cant see that being too much of an issue.
-
I've never had a plastic tool that didn't break over time, and that's my beef.
time, sun do a number on it. Hard strong plastic becomes brittle weak plastic. -
Glock

-
@hawkchucker said:
And I have said it before about the plastic.GLOCK
Never liked the Glock. Feelt like a heavy toy gun
-
@hawkchucker said:
Glock
LOL I do want one! and I do wonder how they'll last over time

-
Glock? Isn't that a plastic gun? So people can hide them better or that it is more comfy to carry around? Who the h.ll did invent something like that?? :ahhh Please if you have one (or any gun), get rid of it. Not a lot of good things are ever came with those things. Please find a less dangerous hobby or get another proffesion if you are a criminal.
-
(soft bell dinging) medication time... medication time.
-
Glock's have a polymer frame. I have three Glocks and the polymer frames are extremely tough..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login