Power Access owners' club
-
PowerAccess newbie checking in!


-
Welcome microbe!
Proud SAKMC member :)
-
Helping repair the toilet.

-
In the pocket today

-
That pointed needle nose, and the extra grip on the pliers have made the acquisition already worth it.
The other tools however, are a bit dinky to my liking. Good for small stuff, but that's it. -
Thinking of joining the club- any more feedback on the tool? Saw the warning with the blade folding back but nothing else. I'm actually choosing this over another tool (an MP400) coz, well, this is a relatively new model and it seems to have positive feedback so far. Though it's not going to be facing any heavy duty work like cutting barbed wire or diamond-shaped fencing, I want a usable tool and not a new toy.
-
And how big is the power access? :)
-
I guess I'm in. Not exactly a proud owner but an owner and user none the less!
All that filing on the back of the locks helped rid the gap between the plier handles. The result is that the harder you clamp your hand around the tool, the lesser risk of the blade over extending upward. This works almost as well on the flat head tool as well. Previously, the harder you clamp both handles down, the higher the risk of the knife or flat head folding upward -- now it's the opposite!

I have to admit that this tool really reads good on paper:
- Compound leverage
- Outside accessible tools
- One-hand opening and one-hand closing of pliers
- Teeth of the gears are covered
- Approx 4-inch when closed allows for easy carry with pocket-clip.
- Can accommodate hex screw bits (sold separately ;) )
-
i purchased one on here a couple weeks back. i have mixed feelings about it.
<u>pros:</u>
*fantastic set of pocket pliers. maybe the best small pliers i have ever used. solid, no slop. really an engineering marvel.
lightweight, and compact. a very pocket-friendly tool.
nice selection of drivers. i've love to have a saw as well, but that's just personal preference.*
<u>cons:</u>
*the drivers/tools themselves are fairly light duty and flimsy feeling. the first time i used the phillips head, i applied a little torque, and it felt like i was going to twist the driver right out of the tool.
minor clumping.
the trade-off for outside-opening drivers is an uncomfortable handle when using the pliers for any real use.
the washers in between each driver creates enough space for side-to-side play. i would rather see slightly thicker drivers and no washers (if at all possible) to achieve a more robust tool.*
the power access is close to a perfect edc pocket plier/mt, but it misses the mark just slightly. it feels like a nicely engineered and well-built toy. hopefully future versions can address this.
-
@the_dude said:
i purchased one on here a couple weeks back. i have mixed feelings about it.<u>pros:</u>
*fantastic set of pocket pliers. maybe the best small pliers i have ever used. solid, no slop. really an engineering marvel.
lightweight, and compact. a very pocket-friendly tool.
nice selection of drivers. i've love to have a saw as well, but that's just personal preference.*
<u>cons:</u>
*the drivers/tools themselves are fairly light duty and flimsy feeling. the first time i used the phillips head, i applied a little torque, and it felt like i was going to twist the driver right out of the tool.
minor clumping.
the trade-off for outside-opening drivers is an uncomfortable handle when using the pliers for any real use.
the washers in between each driver creates enough space for side-to-side play. i would rather see slightly thicker drivers and no washers (if at all possible) to achieve a more robust tool.*
the power access is close to a perfect edc pocket plier/mt, but it misses the mark just slightly. it feels like a nicely engineered and well-built toy. hopefully future versions can address this.
I would agree about the uncomfortable handling and ideal size to power ratio the pliers have.
Have you tried to tighten the screw pivots on the tools which have significant side-to-side play? You should be able to find that sweet spot where 1) there isn't any side-to-side play 2) there isn't any tool clumping.
-
I'll just drop it here -- the blade needed a touch up and I wanted to have a pair of scissors along the way.
The second pic is basically the PowerAccess support group.
-
I'm curious, what are the driver sizes? :)
-
I'm just gonna drop this here:
I swapped inner tools. The knife, philips, awl and flat head are now on the "working side". The can opener, bottle opener, eyeglass screwdriver and file are on the "folding up" side. I won't apply that much strain on those tools anyway so I don't have to worry that much about the tools flipping up due to the problematic lock.
Really trying my best to like this tool and make it work!
-
@Zephon said:
I'm just gonna drop this here:I swapped inner tools. The knife, philips, awl and flat head are now on the "working side". The can opener, bottle opener, eyeglass screwdriver and file are on the "folding up" side. I won't apply that much strain on those tools anyway so I don't have to worry that much about the tools flipping up due to the problematic lock.
Really trying my best to like this tool and make it work!
You're determined, that's for sure. Nobody can accuse you of not giving it a fair chance

-
@Zephon said:
I'm just gonna drop this here:I swapped inner tools. The knife, philips, awl and flat head are now on the "working side". The can opener, bottle opener, eyeglass screwdriver and file are on the "folding up" side. I won't apply that much strain on those tools anyway so I don't have to worry that much about the tools flipping up due to the problematic lock.
Really trying my best to like this tool and make it work!
You're really giving it a fair chance to prove itself.

Any troubles moving the inner tools?
I'd like to remove some tools on mine when it gets here, to make it a more suitable partner for my SAK. -
@Pablo O'Brien said:
I'm just gonna drop this here:
I swapped inner tools. The knife, philips, awl and flat head are now on the "working side". The can opener, bottle opener, eyeglass screwdriver and file are on the "folding up" side. I won't apply that much strain on those tools anyway so I don't have to worry that much about the tools flipping up due to the problematic lock.
Really trying my best to like this tool and make it work!
You're really giving it a fair chance to prove itself.

Any troubles moving the inner tools?
I'd like to remove some tools on mine when it gets here, to make it a more suitable partner for my SAK.No trouble really. I just don't remember the original sequence of who had how many washers where...
The thumb nicks are designed to follow a certain sequence so it's a puzzle of sorts. The 3D driver either needs smaller tools beside it or more washers.
You may need a small clamp to hold innards in place. The horizontal bar that locks the tools when folded and the tool lock themselves can fall out when you unscrew the tools. Think of an 'H' where the horizontal bar will fall out.
Hope you have extra washers if you're gonna leave tools out.
Aside from that, it's a fun experience!
-
Here's something amusing -- was carrying the Power Access as EDC yesterday during a field trip. Nothing heavy expected -- nothing a SAK Signature couldn't handle. I had the Power Access riding my pocket using the built-in clip.
What happened is that the clip slid off the retaining tab because I purposely didn't screw it in very tight to be able to flip it open like a balisong. So there I was, back in the bus tightening the screw of the pocket clip all the way

If there's really one thing the Power Access has going for it, it's the size and power ratio!
(I actually managed to slightly turn the screw at the tools of an MP-600 to adjust the tension of the tools to give it a "click". The pliers grip was good that it didn't slip off the smooth screw head.)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



