Vintage SAK Owners Club
-
@El Corkscrew said:
Oh Man, I just notice the screwdriver doesn't have a file. Seems to be rare indeed. I had never seen a bail without the file. :o I think that must be one of the very last Bails before the transition in 68. Maybe a 69... But I guess they kept selling rach piece until they ran out, into the early 70s.Phillips screwdrivers without files are the norm for Elinox line knives from their inception in 1957 until discontinuation in the mid 1970s. Early Elinox Phillips drivers up until c. 1970 were simply unfinished versions of the Victoria line tools where they skipped the file grinding and polishing step. Some Elinox models from the 1960s can be found with the Victoria Phillips (with file), but these tend to be the exception not the norm (probably < 10%). Around 1970 Victorinox drops the Phillips file from almost all models - both Victoria and Elinox - with the notable exception of the Fisherman. Champions, Craftsmans, Artisans, etc, all get a solid, square, fully polished, file-less Phillips from about 1970-1974, at which point the can-key slot is introduced into the square Phillips. This same time Elinox knives begin to get fully polished tools as well so they get the same Phillips as the Victoria knives. This stays the same until c. 1983 when the round, can-key slotted Phillips is introduced.
-
great information! but I thought the round can key phillips showed up closer to 80??

-
I mostly collect Corkscrews and had not really considered the differences between the Elinox and Victoria line that you pointed out. I had notice more of these differences with the economy lines on the Corkscrews that came later. So thank you

-
@El Corkscrew said:
Oh Man, I just notice the screwdriver doesn't have a file. Seems to be rare indeed. I had never seen a bail without the file. :o I think that must be one of the very last Bails before the transition in 68. Maybe a 69... But I guess they kept selling rach piece until they ran out, into the early 70s.
Phillips screwdrivers without files are the norm for Elinox line knives from their inception in 1957 until discontinuation in the mid 1970s. Early Elinox Phillips drivers up until c. 1970 were simply unfinished versions of the Victoria line tools where they skipped the file grinding and polishing step. Some Elinox models from the 1960s can be found with the Victoria Phillips (with file), but these tend to be the exception not the norm (probably < 10%). Around 1970 Victorinox drops the Phillips file from almost all models - both Victoria and Elinox - with the notable exception of the Fisherman. Champions, Craftsmans, Artisans, etc, all get a solid, square, fully polished, file-less Phillips from about 1970-1974, at which point the can-key slot is introduced into the square Phillips. This same time Elinox knives begin to get fully polished tools as well so they get the same Phillips as the Victoria knives. This stays the same until c. 1983 when the round, can-key slotted Phillips is introduced.
Great! Thank you JAZZBASS. Here is another file-less Phillips on Victoria Champion from early 1970s

Sent from my iPad using Tapatalk
-
@JNOXID said:
@El Corkscrew said:
Oh Man, I just notice the screwdriver doesn't have a file. Seems to be rare indeed. I had never seen a bail without the file. :o I think that must be one of the very last Bails before the transition in 68. Maybe a 69... But I guess they kept selling rach piece until they ran out, into the early 70s.
Phillips screwdrivers without files are the norm for Elinox line knives from their inception in 1957 until discontinuation in the mid 1970s. Early Elinox Phillips drivers up until c. 1970 were simply unfinished versions of the Victoria line tools where they skipped the file grinding and polishing step. Some Elinox models from the 1960s can be found with the Victoria Phillips (with file), but these tend to be the exception not the norm (probably < 10%). Around 1970 Victorinox drops the Phillips file from almost all models - both Victoria and Elinox - with the notable exception of the Fisherman. Champions, Craftsmans, Artisans, etc, all get a solid, square, fully polished, file-less Phillips from about 1970-1974, at which point the can-key slot is introduced into the square Phillips. This same time Elinox knives begin to get fully polished tools as well so they get the same Phillips as the Victoria knives. This stays the same until c. 1983 when the round, can-key slotted Phillips is introduced.
Great! Thank you JAZZBASS. Here is another file-less Phillips on Victoria Champion from early 1970s

Sent from my iPad using Tapatalk
Sweet knife!
But wouldn't that be a Craftsman? -
Thank you El Corkscrew! This one is c.1972-1973 Champion, very close to 1970s Craftsman but with long nail file.

Sent from my iPad using Tapatalk
-
Ah so! I've got a couple champion C's, one NIB. I really want to find a pre 61 climber and 60's standard with bail and scale tools (does it exist?)
-
Wouldn't it be easier to just cut a piece of brass rod, bend it in half and then bend the two extremities and insert them in the knife?...
No not possible - As the pin that holds the bail on is the rivet on which the tools pivot, and holds the knife together

..... Unless you have a hollow rivet - a la Wenger Soldier - as 42 mentions !!
And for these old SAKs - that is not authentic :o@TonySal said:
Hi guys, I neef a bale for a pocket knife, the U shape that "presses" in to eitjer side, no fancy work except the bending to shape. Any hints ? Thank you
We now return to VSAKOC. already in progress...Some hints above in my and 42's posts ???
I hope to make a full step by step guide on how I did it - But it may take some timeThanks, sorry bout the phone typos -
-
@El Corkscrew said:
Ah so! I've got a couple champion C's, one NIB. I really want to find a pre 61 climber and 60's standard with bail and scale tools (does it exist?)I have no 60s Standard with scale tools but here are some old "Climbers". Mod.235, 235aU, 235kaU and 245kaU


Sent from my iPad using Tapatalk
-
@JNOXID said:
@El Corkscrew said:
Ah so! I've got a couple champion C's, one NIB. I really want to find a pre 61 climber and 60's standard with bail and scale tools (does it exist?)
I have no 60s Standard with scale tools but here are some old "Climbers". Mod.235, 235aU, 235kaU and 245kaU


Sent from my iPad using Tapatalk

-
@JNOXID said:
@El Corkscrew said:
Ah so! I've got a couple champion C's, one NIB. I really want to find a pre 61 climber and 60's standard with bail and scale tools (does it exist?)
I have no 60s Standard with scale tools but here are some old "Climbers". Mod.235, 235aU, 235kaU and 245kaU


Sent from my iPad using Tapatalk
Just beautiful

-
El Hoffritz "Super Tinker" & "Climber"


-
Oh, oh....another bail addict. It was bound to happen.

-
Victoria, 84mm, file on driver.. Pre '73? Or would the file on the driver date it earlier?



-
My latest... Model 136aU...

Sent from my iPad using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login