Cutting glass bottles
-
Hi and welcome to the forum.
For drilling I would recommend a New England Carbide Quad Tip Glass and Tile Drill. They come in various sizes,
-
Hi and welcome to the forum.
For drilling I would recommend a New England Carbide Quad Tip Glass and Tile Drill. They come in various sizes,
Have you tried them vs the fismo,d tipped bits?
Sent from my VS425PP using Tapatalk
I've had some success with diamond tip bits but must use duck tape around bottle and fill bottle with water, cap it and fill a basin with water just above bottle drilling surface and also use strafoam under bottle to reduce vibration. But is slow and start small n work up do desired size hole
Sent from my VS425PP using Tapatalk
-
I've used one to drill a hole through a Leatherman File which is pretty hard metal. I've also used it to drill through some really hard ceramic tile. I think it would drill through a glass bottle pretty easily.
-
Worth a shot
Sent from my VS425PP using Tapatalk
-
Maybe those videos helps:
https://www.youtube.com/watch?v=YjzqnfQtVYY
https://www.youtube.com/watch?v=WxKZ8hhcmvg
https://www.youtube.com/watch?v=Gh_xh8LK3qA
https://www.youtube.com/watch?v=obZvrg92M4MQuite simple with the heatup and cool down method.
Otherwise...dremel with diamnond tools. And dont forget googles while doing this stuff.
-
@Shuya said:
Maybe those videos helps:https://www.youtube.com/watch?v=YjzqnfQtVYY
https://www.youtube.com/watch?v=WxKZ8hhcmvg
https://www.youtube.com/watch?v=Gh_xh8LK3qA
https://www.youtube.com/watch?v=obZvrg92M4MQuite simple with the heatup and cool down method.
Otherwise...dremel with diamnond tools. And dont forget googles while doing this stuff.
Yes I've tried a dremel it works well but only hold back is getting a straight cut. Tried making a jig and mounting dremel securely but the only trouble is keeping blade lubricated with water. Bought a small wet saw and am currently waiting arrival of thin kerf blades. The normal tile blades are a bit to thick and don't make a clean cut, chips and small cracks.
Sent from my VS425PP using Tapatalk
-
Hi and welcome to the forum.
For drilling I would recommend a New England Carbide Quad Tip Glass and Tile Drill. They come in various sizes,
Have you tried them vs the fismo,d tipped bits?
Sent from my VS425PP using Tapatalk
I've had some success with diamond tip bits but must use duck tape around bottle and fill bottle with water, cap it and fill a basin with water just above bottle drilling surface and also use strafoam under bottle to reduce vibration. But is slow and start small n work up do desired size hole
Sent from my VS425PP using Tapatalk
I've no experience in that but that was the method I've heard about.

Welcome to the forum!

-
Good luck with your
bongslamps!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






