Back to (Mora) basics
-
@fivesense said:
I've been shuffling my EDC folding knives lately. I primarily carry a PM2 and now a Yojimbo 2. Both are nice and sharp with typically smooth Spyderco action. I also carry my Swiss Champ or Explorer Plus SAK.All that said, I also like having a stout one-handed opening blade on me for grunt tasks that come up during the course of the day. The SAK takes two hands and I use but don't abuse my Spydercos, preferring to keep them relegated to slicing and dicing. So I've been in the hunt for a folder with a sharp but thicker blade, maybe half tanto or some variation. Or maybe something like a serrated Delica, or mini-Griptilian.
Then, on a hike today, it hit me- I always carry one of my Moras with me while hiking and it occurred to me that a fixed blade, simple, reliable beauty like Companion or Companion HD is what I need (and a handful of which I already have)! I love Moras and I carry them often, so why not just do so in the role mentioned above?! One handed "opening..." Check. Durable... Check. Quality/value ratio that guarantees I'll use the knife, even for grunt work... Check.
I may pick up another Companion or HD just because. But as a member of the Mora Club, I thought I'd share this story because we already know Moras are great.
Good for you!I hardly have any locking knives. Typically, if a job seems a little heavy for a slippy, I'll go straight for a fixed blade knife. I hate to see people beating the crap out of folders, and wish they would go and get a proper knife.

I have several cheapo sheath knives that I don't mind using hard. Moras, Cold Steel, and a couple of others. Not only is it better risking spoiling a £15 knife than a £50+ knife, it's also safer too. Knives are generally a lot easier to replace than fingers :ahhh :ahhh :ahhh
-
My Mora stable includes Companion, Companion HD, Bushcraft Black and Orange, one of the original 2.5mm Bushcrafts, Garberg, and Eldris. Eldris is the one that I haven't quite found the niche for just yet, but I began to think last night that maybe it does fit the role I mentioned at the outset of this thread. The size is a little confusing because it's as thick as Garberg's handle but stubby, and the existing sheath doesn't allow for belt wear (I'm not likely to wear on my neck during a regular day). In its sheath, it's too fat for comfortable front pocket carry. I've started to see some Eldris sheath mods out there.
But ultimately, Companion (and HD) are so light and simple, and I'm one of those that actually likes the cheap factory Mora sheaths. Easy for belt of pocket clip wear. And at $13-$20 USD, it's truly a compelling option.
-
Hello all!
I'm about to get my first Mora soon, a 2017 Basic 511 in carbon steel. I'm thinking of giving this to my wife for her use around the kitchen. Is it suitable for kitchen use-- cutting vegetables, meat, etc? If so, how often will I sharpen it and oil the carbon steel?
-
I'm about to get my first Mora soon, a 2017 Basic 511 in carbon steel. I'm thinking of giving this to my wife for her use around the kitchen. Is it suitable for kitchen use-- cutting vegetables, meat, etc? If so, how often will I sharpen it and oil the carbon steel?
Personally for food prep I would get a SS Mora as easier to maintain ,but that said if you clean and dry your carbon blade it should be ok,if oiled use a veg based oil due to food prep

-
Hello all!
I'm about to get my first Mora soon, a 2017 Basic 511 in carbon steel. I'm thinking of giving this to my wife for her use around the kitchen. Is it suitable for kitchen use-- cutting vegetables, meat, etc? If so, how often will I sharpen it and oil the carbon steel?
Personally for food prep I would get a SS Mora as easier to maintain ,but that said if you clean and dry your carbon blade it should be ok,if oiled use a veg based oil due to food prep

Thanks, Zed! I agree with the SS for kitchen, but carbon is my only choice for now. I ill use veg based oil for maintenance. How often do you think it needs to be sharpened if its only for regular light kitchen duty?
-
Hello all!
I'm about to get my first Mora soon, a 2017 Basic 511 in carbon steel. I'm thinking of giving this to my wife for her use around the kitchen. Is it suitable for kitchen use-- cutting vegetables, meat, etc? If so, how often will I sharpen it and oil the carbon steel?
Personally for food prep I would get a SS Mora as easier to maintain ,but that said if you clean and dry your carbon blade it should be ok,if oiled use a veg based oil due to food prep

Thanks, Zed! I agree with the SS for kitchen, but carbon is my only choice for now. I ill use veg based oil for maintenance. How often do you think it needs to be sharpened if its only for regular light kitchen duty?
No problem mate,a light stropping after use will keep it hair popping sharp

-
Hello all!
I'm about to get my first Mora soon, a 2017 Basic 511 in carbon steel. I'm thinking of giving this to my wife for her use around the kitchen. Is it suitable for kitchen use-- cutting vegetables, meat, etc? If so, how often will I sharpen it and oil the carbon steel?
Personally for food prep I would get a SS Mora as easier to maintain ,but that said if you clean and dry your carbon blade it should be ok,if oiled use a veg based oil due to food prep

Thanks, Zed! I agree with the SS for kitchen, but carbon is my only choice for now. I ill use veg based oil for maintenance. How often do you think it needs to be sharpened if its only for regular light kitchen duty?
No problem mate,a light stropping after use will keep it hair popping sharp

that I can manage :D

-
[quote author=an0nemus link=topic=72945.msg1540122#msg1540122 date=1503124102]
Hello all!I'm about to get my first Mora soon, a 2017 Basic 511 in carbon steel. I'm thinking of giving this to my wife for her use around the kitchen. Is it suitable for kitchen use-- cutting vegetables, meat, etc? If so, how often will I sharpen it and oil the carbon steel?
Personally for food prep I would get a SS Mora as easier to maintain ,but that said if you clean and dry your carbon blade it should be ok,if oiled use a veg based oil due to food prep

Thanks, Zed! I agree with the SS for kitchen, but carbon is my only choice for now. I ill use veg based oil for maintenance. How often do you think it needs to be sharpened if its only for regular light kitchen duty?
No problem mate,a light stropping after use will keep it hair popping sharp

that I can manage :D

[/quote]
-
Check out the Classic line as well. Those can be very handy in the kitchen.
Also don't forget to enlist in the Mora club. Uncle Gareth wants you to enjoy a Mora/topic/67811
-
Just be carefull as they are addictive


-
yep, you're smurfed
-
Don't listen to the fear mongers :D It's perfectly doable to own a Mora without getting addicted ;)
I have two. I have a carbon steel Miki which lives in the toolbag, and a bright orange Hi Vis which gets chucked in the bag when out walking. I have another couple of puukkos too, but tend to only use one of them (because it was my first ever fixed blade). These three meet all my needs with Scandi grinds, though they are not my first choice when doing food prep. I prefer a hollow grind or flat grind for food prep, and also something that comes forward of the knuckles so that more of the blade is in play on a chopping board. The Boker+ TUF and Cold Steel Roach Belly are my go to knives for food prep (the Roach Belly sometimes edges out the Hi Vis Mora in my hiking bag if I'm taking food that needs preparing/processing). Occasionally I'll go old school with a Nowill carbon steel knife, and have been known to use a CS Bushman on occasion too

Moras are great budget knives (the more basic models), and I think this is why I am so comfortable owning just two. The two I have work so well, I simply don't need any more. In fact I gave away the others I had as they weren't getting used.
-
@50ft-trad said:
Don't listen to the fear mongers :D It's perfectly doable to own a Mora without getting addicted ;)I have two. I have a carbon steel Miki which lives in the toolbag, and a bright orange Hi Vis which gets chucked in the bag when out walking. I have another couple of puukkos too, but tend to only use one of them (because it was my first ever fixed blade). These three meet all my needs with Scandi grinds, though they are not my first choice when doing food prep. I prefer a hollow grind or flat grind for food prep, and also something that comes forward of the knuckles so that more of the blade is in play on a chopping board. The Boker+ TUF and Cold Steel Roach Belly are my go to knives for food prep (the Roach Belly sometimes edges out the Hi Vis Mora in my hiking bag if I'm taking food that needs preparing/processing). Occasionally I'll go old school with a Nowill carbon steel knife, and have been known to use a CS Bushman on occasion too

Moras are great budget knives (the more basic models), and I think this is why I am so comfortable owning just two. The two I have work so well, I simply don't need any more. In fact I gave away the others I had as they weren't getting used.
I'm slowly realizing that it seems like what Victorinox is in the pocket knife market, Morakniv occupies the same space in the fixed blade space. Both offering global standard quality at reasonable prices.
It's too early to say, but I may end up with 2-3 this year, especially since Morakniv is available locally. I really don't need a bushcraft tool, but it will be as part of my disaster preparedness kit. Right now, I'm thinking a model higher than the 511 and the Eldris

But I'll first enjoy that 511 when it comes....or ask my wife how she will like it

-
The more inexpensive Moras are easy to own and great knives to experiment with. Now the Kansbol, Garberg and Bushcraft Black do enter the range where you've got more competition from other makers and other designs. So you're very on point with the Vic comparison. A lot of those traditional inexpensive folders simply work. They aren't fancy and one's pride of ownership comes from very personal reasons.
Just don't forget that a lot of the mysticism of Mora comes from the fact that they put a 22° edge angle (11 per side sometimes also written as 11dps) while most other manufacturers put a 40 or even 50° angle. Some of the sharper knives I've tried out had a microbevel at 30 which still does make a difference.
Another thing is that the single bevel saber grind (scandi) should in theory exceed at shallow cuts. I can't really say how much that theory is proven since a bunch of us are testing slightly modified Moras, but with carrots and similar things you might notice a difference between a Mora and something very thin like a Vic or an Opinel.I've went into a bit more detail since I got no idea how much you know and what your experience is so pardon me if I've said the things you're already fully aware of.
-
@styx said:
The more inexpensive Moras are easy to own and great knives to experiment with. Now the Kansbol, Garberg and Bushcraft Black do enter the range where you've got more competition from other makers and other designs. So you're very on point with the Vic comparison. A lot of those traditional inexpensive folders simply work. They aren't fancy and one's pride of ownership comes from very personal reasons.Just don't forget that a lot of the mysticism of Mora comes from the fact that they put a 22° edge angle (11 per side sometimes also written as 11dps) while most other manufacturers put a 40 or even 50° angle. Some of the sharper knives I've tried out had a microbevel at 30 which still does make a difference.
Another thing is that the single bevel saber grind (scandi) should in theory exceed at shallow cuts. I can't really say how much that theory is proven since a bunch of us are testing slightly modified Moras, but with carrots and similar things you might notice a difference between a Mora and something very thin like a Vic or an Opinel.I've went into a bit more detail since I got no idea how much you know and what your experience is so pardon me if I've said the things you're already fully aware of.
I'm embarrassed to admit this, styx, but my technical understanding of a knife is really limited to what's printed on its packaging box, i.e., blade length, overall length, material, etc.

So you dove into knowledge depth about knives that I can't swim into. But after reading your post above, I get this impression that Morakniv really approached knifemaking from a scientific perspective, which is good . Also, I actually contemplated getting a basic Opinel as a kitchen knife for my wife and I'm encouraged to know that the sandi grind is theoretically better than an Opinel.

For now, I'm just hoping that the 511 carbon will be immensely better at food prep compared to the garden variety cheap knife she's using right now. My ulterior motive here is to soften her opposition to my growing knife addiction.

Thanks for the education, styx!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



