The Hacked Leatherman Owners Club.
-
It took me a few hours to get back together, but It is finally complete! I didn't want to ditch the scissors,or shorten them, since they are the perfect length for cutting electrical tape, so I went with grinding a bit of the "jowel" down to accomidate. It's pretty tricky as it's dam near impossible to see where it's making contact. I did end up having to grind a bit off of the locking pin on the PE side, because it's still about 2-3mm from closing. If anyone has any good pics of how much they took off to get it to clear the scissors, I'd love to see them. I don't want to take off any more material going in blind...


-
Here's a closeup of the grind. Dremel with a grinding wheel is what I used. I tried putting masking tape on the plier and closing to try and get an imprint of where it's hanging up, but it wasn't very visible. For now it closes almost all the way and blades open up, so I'm holding off until I figure out how to determine the exact location that needs further excavation. I am hoping that it's strength hasn't been compromised, but these pliers are pretty badass!
-
Try chewing gum.
-
Modded wave, added Vic scissors, tweezer, toothpick and pen. I welded some extra material to the scissors so they would lock up nicely and close smoothly. Ground guthook in serrated blade, swapped the head for the head of a rebar, added rebar awl. Added 2 aluminium blocks to the side for comfort. Removed can opener and added pointy stick :P And finally changed the flat driver to a chisel. My mini bit driver is so short because it broke of.

-
@jaya_man said:
Thanks DTT, SurivStud and Poncho
This is the video that inspired me...
I cut down a cheap ratchet I had laying around

Cut down the ratchet handle (what used to be) to length... stuck in a 1/4 12mm socket and epoxyed them together... adjusted the square hole of the ratchet (stuck in a small piece of license plate) so that all my tools can fit.



Sent from my iPhone using Tapatalk
I used this same video to make a ratchet for my Wave. Its now with Kev but when I used it it worked great. The idea of having a ratchet for our MTs is really nice. I may have another go at making one again.
Great work!
-
Thanks Aloha...

Sent from my iPhone using Tapatalk
-
Mine!


-
@Sam Lim said:
Mine!Awesome mod

-
@Milan Vandenbilcke said:
Why the short knife? Awesome prybar though!Verstuurd vanaf mijn Moto G (5) Plus met Tapatalk
The pry bar is just $2.. :D almost a simple drop in. Minor filing and hammering.
Well, I had a chip in my blade. So I thought just go ahead and make something different. From where I am, bringing knifes around is always frowned upon.. Not to mention 2.. This mod is more work oriented.. I certainly dun need stabbing. So pointed edge is not required. I need to slash heavy thick material, the shortness of the blade makes up the strength. I need a blade that's strong but one that doesn't look threatening. If that's how you feel, I have a achieved my goal. ;)
-
My Rebar arrived yesterday... Immediately got my tools and did some basic hacking...

I had to grind down the scissors so that the Charge can close properly...


Sent from my iPhone using Tapatalk
-
Nice!
-
Thanks Steve and DTT

Sent from my iPhone using Tapatalk
-
Great mods jaya

-
-
Is that what is commonly called a ReCharge? Nice!

Sent on my SM-G930F with Tapatalk
-
@Dutch_Tooler said:
Is that what is commonly called a ReCharge? Nice!

Sent on my SM-G930F with Tapatalk
Thanks DT: cheers:
Ah yes... ReCharge.... what is a Rebar with Charge Plier heads then? still figuring out how to replace the eye-glass bit holder with the Rebar awl without sacrifing all the other tools...
Sent from my iPhone using Tapatalk
-
That's easy - a Chabar! :D
Sent on my SM-G930F with Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
I'm thinking about it... What do you think about the structural integrity of the pliers-post modification?
