Car boot sale find, my first _______ tool!
-
@Pablo O'Brien said:
Congrats on the great find for the price!
All you need is to touch up the blade and looks like you're good to go.
I was thinking about cutting off the blade. :ahhh
Blades are technically not allowed around here for EDC purposes, and I'm quite fond of bladeless tools.
I'll have a look to see if I have anything that you can replace the knife with
In the meantime, get ALL the rust off
Rust spreads, and you don't want any lurking in there -
@50ft-trad said:
@Pablo O'Brien said:
Congrats on the great find for the price!
All you need is to touch up the blade and looks like you're good to go.
I was thinking about cutting off the blade. :ahhh
Blades are technically not allowed around here for EDC purposes, and I'm quite fond of bladeless tools.
I'll have a look to see if I have anything that you can replace the knife with
In the meantime, get ALL the rust off
Rust spreads, and you don't want any lurking in thereI don't have the special keys for the pivots.
Will look up the best way to remove the rust.

-
Score
-
@Pablo O'Brien said:
@50ft-trad said:
@Pablo O'Brien said:
Congrats on the great find for the price!
All you need is to touch up the blade and looks like you're good to go.
I was thinking about cutting off the blade. :ahhh
Blades are technically not allowed around here for EDC purposes, and I'm quite fond of bladeless tools.
I'll have a look to see if I have anything that you can replace the knife with
In the meantime, get ALL the rust off
Rust spreads, and you don't want any lurking in thereI don't have the special keys for the pivots.
Will look up the best way to remove the rust.

Bah! My parts bin has less useful stuff in than I thought. I have a file from a Wingman, but that'll take some work with a dremel or other power tools to get it to fit and let the tool close properly.
-
Good score !

-
No pics :-\ plus what LM was it
congratulations on saving it 
-
2 Euro was a steal in my mind, to me anything less than $20 for a Kick is.
Two pairs of Vise Grips work in a pinch if you don't have the proper wrenches. I use fine steel wool to remove rust and it seems to work well unless it's decades of rust, in that case I grab the vinegar. You'll also need a really coarse stone to rid the knife of those chips. That's one of the most badly chipped blades I've seen in my life, it almost looks like a serrated blade!
-
You can use vice grips to remove knurled screws. There may be scratches left over and you'll need one for each side but its doable. Can you reshape the blade into something else? Anyway nice find and great work on getting it up to snuff. As far as the residual rust, you can use sand paper of varying grits, I like wet or dry and use wet.
-
Am I being stupid as heading doesn't say what it is and I've read the 1st post 3 times
:ahhh

-
-
@50ft-trad said:
@Pablo O'Brien said:
@50ft-trad said:
@Pablo O'Brien said:
[quote author=Zephon link=topic=73637.msg1543871#msg1543871 date=1503752343]
Congrats on the great find for the price!All you need is to touch up the blade and looks like you're good to go.
I was thinking about cutting off the blade. :ahhh
Blades are technically not allowed around here for EDC purposes, and I'm quite fond of bladeless tools.
I'll have a look to see if I have anything that you can replace the knife with
In the meantime, get ALL the rust off
Rust spreads, and you don't want any lurking in thereI don't have the special keys for the pivots.
Will look up the best way to remove the rust.

Bah! My parts bin has less useful stuff in than I thought. I have a file from a Wingman, but that'll take some work with a dremel or other power tools to get it to fit and let the tool close properly.
[/quote]
I've no need for a file.
Thanks for checking anyway.
-
Thanks everyone.

Thank you to Cody and Aloha for the vise grips tip.
I'll leave it as is right now, except for going after the rust. >:D -
Some nicer pics in the sun, after removing some rust.



Should I try sanding the nooks and cannies of the plier head to remove more rust?

Trying to figure out how to get the hidden rust away. -
@Pablo O'Brien said:
Some nicer pics in the sun, after removing some rust.


Should I try sanding the nooks and cannies of the plier head to remove more rust?

Trying to figure out how to get the hidden rust away.Yes. I'm not sure how Vinegar will effect the Zytel but a soak would be great. You can take fine sand paper to sand the cutters, its a PITA ( pain in the arse ) to some but I quite enjoy the process and outcome. I think for the hidden rust a well lubricated tool should be adequate ( 3in1 oil or similar ).
-
A dremel with cotton pollishing wheel and some polishing paste will do the trick
-
Great find :o Glad to see you now have a plier based tool
:DHopefully the rust will come on off and you will have a nice tool

So even a non locking blade isn't look well on
Maybe grind it into an awl
:D -
You could just soak the pliers in some kind of rust remover. Maybe reshape the blade into a marlin spike? A very large awl would be neat. I'm sure you'll figure out something cool to change it out for.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
it's so small on my phone I couldn't see it
very Pablo