EDC Question
-
This has been my carry combination for the past 9 months almost. A Pruner and a Rambler on the keychain. I love this combination. Although the main blade on the Pruner is very slightly crinked it's not enough to annoy me and this from someone who once sold an expensive limited edition traditional folder at a loss because the crinking annoyed me so much. I wouldn't buy a 3 layer Alox for example due to the crinking. To put it into perspective, the crinking on my Pruner main blade is less than on some single blade traditionals I own, specifically those made by Queen.

This combo gives me two blades for working with, a large blade for food (like you I eat apples every day) and the pruner blade is perfect for opening stuff of every type be it boxes, envelopes, clamshell packaging or zip ties. The Rambler fulfills all the tasks I might need in addition as well as a tiny blade for fine work. I have no need for a can opener, awl, etc as daily on person carry.
-
Spoiler:
This has been my carry combination for the past 9 months almost. A Pruner and a Rambler on the keychain. I love this combination. Although the main blade on the Pruner is very slightly crinked it's not enough to annoy me and this from someone who once sold an expensive limited edition traditional folder at a loss because the crinking annoyed me so much. I wouldn't buy a 3 layer Alox for example due to the crinking. To put it into pers thpective, the crinking on my Pruner main blade is less than on some single blade traditionals I own, specifically those made by Queen.

This combo gives me two blades for working with, a large blade for food (like you I eat apples every day) and the pruner blade is perfect for opening stuff of every type be it boxes, envelopes, clamshell packaging or zip ties. The Rambler fulfills all the tasks I might need in addition as well as a tiny blade for fine work. I have no need for a can opener, awl, etc as daily on person carry.
What's crinking?
-
Spoiler:
This has been my carry combination for the past 9 months almost. A Pruner and a Rambler on the keychain. I love this combination. Although the main blade on the Pruner is very slightly crinked it's not enough to annoy me and this from someone who once sold an expensive limited edition traditional folder at a loss because the crinking annoyed me so much. I wouldn't buy a 3 layer Alox for example due to the crinking. To put it into pers thpective, the crinking on my Pruner main blade is less than on some single blade traditionals I own, specifically those made by Queen.

This combo gives me two blades for working with, a large blade for food (like you I eat apples every day) and the pruner blade is perfect for opening stuff of every type be it boxes, envelopes, clamshell packaging or zip ties. The Rambler fulfills all the tasks I might need in addition as well as a tiny blade for fine work. I have no need for a can opener, awl, etc as daily on person carry.
What's crinking?
Crinking is (intentionally) bending a blade. Occasionally done with a knife blade to get it to sit where it's needed, and with scissors to ensure point contact and not full face rub.
-
@Ronald Schröder said:
@Ronald Schröder said:
[quote author=Ronald Schröder link=topic=73612.msg1543055#msg1543055 date=1503599317]
The Pioneer Solo is an excellent apple knife. Lightweight and easy to maintain. I speak from over 10 years of experience. If you need a larger blade only, go for it.Do you EDC your Solo?
Sent from my XT1635-01 using Tapatalk
The Solo is the one that's with me every single day. I
Do you carry other SAK's or folders with you?
Sent from my XT1635-01 using Tapatalk
These four, usually.
[/quote]
Oh, OK 😀. Thanks for the reply. You appear to be prepared.Sent from my XT1635-01 using Tapatalk
-
@pomsbz said:
This has been my carry combination for the past 9 months almost. A Pruner and a Rambler on the keychain. I love this combination. Although the main blade on the Pruner is very slightly crinked it's not enough to annoy me and this from someone who once sold an expensive limited edition traditional folder at a loss because the crinking annoyed me so much. I wouldn't buy a 3 layer Alox for example due to the crinking. To put it into perspective, the crinking on my Pruner main blade is less than on some single blade traditionals I own, specifically those made by Queen.
This combo gives me two blades for working with, a large blade for food (like you I eat apples every day) and the pruner blade is perfect for opening stuff of every type be it boxes, envelopes, clamshell packaging or zip ties. The Rambler fulfills all the tasks I might need in addition as well as a tiny blade for fine work. I have no need for a can opener, awl, etc as daily on person carry.
I dislike crinking as well. I notice it in most of my Victorinox SAKS. I haven't researched the Pruner yet. Is that basically a Solo with a 2nd blade?
Sent from my XT1635-01 using Tapatalk
-
This has been my carry combination for the past 9 months almost. A Pruner and a Rambler on the keychain. I love this combination. Although the main blade on the Pruner is very slightly crinked it's not enough to annoy me and this from someone who once sold an expensive limited edition traditional folder at a loss because the crinking annoyed me so much. I wouldn't buy a 3 layer Alox for example due to the crinking. To put it into perspective, the crinking on my Pruner main blade is less than on some single blade traditionals I own, specifically those made by Queen.

This combo gives me two blades for working with, a large blade for food (like you I eat apples every day) and the pruner blade is perfect for opening stuff of every type be it boxes, envelopes, clamshell packaging or zip ties. The Rambler fulfills all the tasks I might need in addition as well as a tiny blade for fine work. I have no need for a can opener, awl, etc as daily on person carry.
I dislike crinking as well. I notice it in most of my Victorinox SAKS. I haven't researched the Pruner yet. Is that basically a Solo with a 2nd blade?
Sent from my XT1635-01 using Tapatalk
Yup. The Pruner is a single layer, two blade knife. Main blade and hooked pruner blade ... and if they weren't crinked to the side, they'd hit each other. More accurately though, they are assymetrically ground to give clearance for each other rather than crinked (bent)
-
In my freetime I carry a 93mm OC Solo and at work my 93mm Farmer. Together with my 58mm Manager at the keys I have everything I need.
By the way, the old OC Solos have a symmetrical blade. No crinking.

-
@50ft-trad said:
This has been my carry combination for the past 9 months almost. A Pruner and a Rambler on the keychain. I love this combination. Although the main blade on the Pruner is very slightly crinked it's not enough to annoy me and this from someone who once sold an expensive limited edition traditional folder at a loss because the crinking annoyed me so much. I wouldn't buy a 3 layer Alox for example due to the crinking. To put it into perspective, the crinking on my Pruner main blade is less than on some single blade traditionals I own, specifically those made by Queen.

This combo gives me two blades for working with, a large blade for food (like you I eat apples every day) and the pruner blade is perfect for opening stuff of every type be it boxes, envelopes, clamshell packaging or zip ties. The Rambler fulfills all the tasks I might need in addition as well as a tiny blade for fine work. I have no need for a can opener, awl, etc as daily on person carry.
I dislike crinking as well. I notice it in most of my Victorinox SAKS. I haven't researched the Pruner yet. Is that basically a Solo with a 2nd blade?
Sent from my XT1635-01 using Tapatalk
Yup. The Pruner is a single layer, two blade knife. Main blade and hooked pruner blade ... and if they weren't crinked to the side, they'd hit each other. More accurately though, they are assymetrically ground to give clearance for each other rather than crinked (bent)
I don't understand the crinking/assymetric grounding dislike. ???
If it wasn't for crinking most SAKs would be impossible to make so compact. -
In my freetime I carry a 93mm OC Solo and at work my 93mm Farmer. Together with my 58mm Manager at the keys I have everything I need.
By the way, the old OC Solos have a symmetrical blade. No crinking.

"OC"? I'm unfamiliar with that.
Old Cross. Alox SAKs made before a certain time have a cross instead of the Victorinox shield.
-
@50ft-trad said:
This has been my carry combination for the past 9 months almost. A Pruner and a Rambler on the keychain. I love this combination. Although the main blade on the Pruner is very slightly crinked it's not enough to annoy me and this from someone who once sold an expensive limited edition traditional folder at a loss because the crinking annoyed me so much. I wouldn't buy a 3 layer Alox for example due to the crinking. To put it into perspective, the crinking on my Pruner main blade is less than on some single blade traditionals I own, specifically those made by Queen.

This combo gives me two blades for working with, a large blade for food (like you I eat apples every day) and the pruner blade is perfect for opening stuff of every type be it boxes, envelopes, clamshell packaging or zip ties. The Rambler fulfills all the tasks I might need in addition as well as a tiny blade for fine work. I have no need for a can opener, awl, etc as daily on person carry.
I dislike crinking as well. I notice it in most of my Victorinox SAKS. I haven't researched the Pruner yet. Is that basically a Solo with a 2nd blade?
Sent from my XT1635-01 using Tapatalk
Yup. The Pruner is a single layer, two blade knife. Main blade and hooked pruner blade ... and if they weren't crinked to the side, they'd hit each other. More accurately though, they are assymetrically ground to give clearance for each other rather than crinked (bent)
Maybe I'm confused now. I thought crinking meant the blade was position in the scales in a bent fashion to allow room for the other tool that's sharing that some space/slot. Is that not the case? What's the asymmetrically grind have to do with that. I interpret that as means an even (or not) bevel grind on each side of the blade. I've never not seen that in a SAK.
So, like I said, I think I'm confused now.
-
@Pablo O'Brien said:
In my freetime I carry a 93mm OC Solo and at work my 93mm Farmer. Together with my 58mm Manager at the keys I have everything I need.
By the way, the old OC Solos have a symmetrical blade. No crinking.

"OC"? I'm unfamiliar with that.
Old Cross. Alox SAKs made before a certain time have a cross instead of the Victorinox shield.
Gotcha. Thanks.
-
@50ft-trad said:
This has been my carry combination for the past 9 months almost. A Pruner and a Rambler on the keychain. I love this combination. Although the main blade on the Pruner is very slightly crinked it's not enough to annoy me and this from someone who once sold an expensive limited edition traditional folder at a loss because the crinking annoyed me so much. I wouldn't buy a 3 layer Alox for example due to the crinking. To put it into perspective, the crinking on my Pruner main blade is less than on some single blade traditionals I own, specifically those made by Queen.

This combo gives me two blades for working with, a large blade for food (like you I eat apples every day) and the pruner blade is perfect for opening stuff of every type be it boxes, envelopes, clamshell packaging or zip ties. The Rambler fulfills all the tasks I might need in addition as well as a tiny blade for fine work. I have no need for a can opener, awl, etc as daily on person carry.
I dislike crinking as well. I notice it in most of my Victorinox SAKS. I haven't researched the Pruner yet. Is that basically a Solo with a 2nd blade?
Sent from my XT1635-01 using Tapatalk
Yup. The Pruner is a single layer, two blade knife. Main blade and hooked pruner blade ... and if they weren't crinked to the side, they'd hit each other. More accurately though, they are assymetrically ground to give clearance for each other rather than crinked (bent)
Maybe I'm confused now. I thought crinking meant the blade was position in the scales in a bent fashion to allow room for the other tool that's sharing that some space/slot. Is that not the case? What's the asymmetrically grind have to do with that. I interpret that as means an even (or not) bevel grind on each side of the blade. I've never not seen that in a SAK.
So, like I said, I think I'm confused now.
It's assymetrically ground, as in that one side of the blade is dead straight, tang to tip, and the other is slanted to make space for a small blade or combo tool.
-
@Pablo O'Brien said:
@50ft-trad said:
[quote author=pomsbz link=topic=73612.msg1544647#msg1544647 date=1503895888]
This has been my carry combination for the past 9 months almost. A Pruner and a Rambler on the keychain. I love this combination. Although the main blade on the Pruner is very slightly crinked it's not enough to annoy me and this from someone who once sold an expensive limited edition traditional folder at a loss because the crinking annoyed me so much. I wouldn't buy a 3 layer Alox for example due to the crinking. To put it into perspective, the crinking on my Pruner main blade is less than on some single blade traditionals I own, specifically those made by Queen.
This combo gives me two blades for working with, a large blade for food (like you I eat apples every day) and the pruner blade is perfect for opening stuff of every type be it boxes, envelopes, clamshell packaging or zip ties. The Rambler fulfills all the tasks I might need in addition as well as a tiny blade for fine work. I have no need for a can opener, awl, etc as daily on person carry.
I dislike crinking as well. I notice it in most of my Victorinox SAKS. I haven't researched the Pruner yet. Is that basically a Solo with a 2nd blade?
Sent from my XT1635-01 using Tapatalk
Yup. The Pruner is a single layer, two blade knife. Main blade and hooked pruner blade ... and if they weren't crinked to the side, they'd hit each other. More accurately though, they are assymetrically ground to give clearance for each other rather than crinked (bent)
Maybe I'm confused now. I thought crinking meant the blade was position in the scales in a bent fashion to allow room for the other tool that's sharing that some space/slot. Is that not the case? What's the asymmetrically grind have to do with that. I interpret that as means an even (or not) bevel grind on each side of the blade. I've never not seen that in a SAK.
So, like I said, I think I'm confused now.
It's assymetrically ground, as in that one side of the blade is dead straight, tang to tip, and the other is slanted to make space for a small blade or combo tool.
[/quote]So, crinked would mean the blade is of equal grind, perfectly straight, etc, but positioned on an angle in the scales vs asymmetric which would have a blade that's straight on one side but angled on the other side but positioned straight in the scales? Each method allows for the addition of a second tool in the same later, but obtain the required space needed in a different way.
Am I close?
-
@Pablo O'Brien said:
@50ft-trad said:
[quote author=this_is_nascar link=topic=73612.msg1544743#msg1544743 date=1503916958]
[quote author=pomsbz link=topic=73612.msg1544647#msg1544647 date=1503895888]
This has been my carry combination for the past 9 months almost. A Pruner and a Rambler on the keychain. I love this combination. Although the main blade on the Pruner is very slightly crinked it's not enough to annoy me and this from someone who once sold an expensive limited edition traditional folder at a loss because the crinking annoyed me so much. I wouldn't buy a 3 layer Alox for example due to the crinking. To put it into perspective, the crinking on my Pruner main blade is less than on some single blade traditionals I own, specifically those made by Queen.
This combo gives me two blades for working with, a large blade for food (like you I eat apples every day) and the pruner blade is perfect for opening stuff of every type be it boxes, envelopes, clamshell packaging or zip ties. The Rambler fulfills all the tasks I might need in addition as well as a tiny blade for fine work. I have no need for a can opener, awl, etc as daily on person carry.
I dislike crinking as well. I notice it in most of my Victorinox SAKS. I haven't researched the Pruner yet. Is that basically a Solo with a 2nd blade?
Sent from my XT1635-01 using Tapatalk
Yup. The Pruner is a single layer, two blade knife. Main blade and hooked pruner blade ... and if they weren't crinked to the side, they'd hit each other. More accurately though, they are assymetrically ground to give clearance for each other rather than crinked (bent)
Maybe I'm confused now. I thought crinking meant the blade was position in the scales in a bent fashion to allow room for the other tool that's sharing that some space/slot. Is that not the case? What's the asymmetrically grind have to do with that. I interpret that as means an even (or not) bevel grind on each side of the blade. I've never not seen that in a SAK.
So, like I said, I think I'm confused now.
It's assymetrically ground, as in that one side of the blade is dead straight, tang to tip, and the other is slanted to make space for a small blade or combo tool.
[/quote]So, crinked would mean the blade is of equal grind, perfectly straight, etc, but positioned on an angle in the scales vs asymmetric which would have a blade that's straight on one side but angled on the other side but positioned straight in the scales? Each method allows for the addition of a second tool in the same later, but obtain the required space needed in a different way.
Am I close?
[/quote]
I believe that crinked blades are actually physically bent.
You have the assymetric description correct I believe. -
If both blades are ground symmetrically and are straight, they are going to both try to be in the middle of the same slot and each is going to slam down on the spine of the other.Not good.
In order for them to sit at one side of the slot or the other so the blades sit side by side, there are two options. The first is an assymetrical grind, so one side of the blade is straight and parallel with the liner, and the other side tapers in, leaving space for the other blade, or crink (bend) the blade so it sit's down one edge instead of the centre. Crinking is simply bending of a knife or scissor blade.
On my Pioneer Pruner (which is the one you asked about) both blades are assymetrically ground to create room for the other. On some of the older Solos, they apparently used a different blade which was ground symetrically so it fell in the middle of the slot. But that is a full set of tooling which will only ever be used for one knife, so it makes more (economic) sense, to now build the Solos simply using the assymetrically ground blade used in every other pioneer, so you only need one set of blade tooling for the whole line.
I hope that helps

-
@50ft-trad said:
If both blades are ground symmetrically and are straight, they are going to both try to be in the middle of the same slot and each is going to slam down on the spine of the other.Not good.In order for them to sit at one side of the slot or the other so the blades sit side by side, there are two options. The first is an assymetrical grind, so one side of the blade is straight and parallel with the liner, and the other side tapers in, leaving space for the other blade, or crink (bend) the blade so it sit's down one edge instead of the centre. Crinking is simply bending of a knife or scissor blade.
On my Pioneer Pruner (which is the one you asked about) both blades are assymetrically ground to create room for the other. On some of the older Solos, they apparently used a different blade which was ground symetrically so it fell in the middle of the slot. But that is a full set of tooling which will only ever be used for one knife, so it makes more (economic) sense, to now build the Solos simply using the assymetrically ground blade used in every other pioneer, so you only need one set of blade tooling for the whole line.
I hope that helps

Thank you so much. I understand now.
Sent from my XT1635-01 using Tapatalk
-
So there's a good chance that I'll get a Solo that looks sort of odd, with the blade being ground the way it is?
Meaning, if the use a Pioneer blade, it's going to look goofy sitting in a single layer.
Sent from my XT1635-01 using Tapatalk
-
@this_is_nascar said:
So there's a good chance that I'll get a Solo that looks sort of odd, with the blade being ground the way it is?Meaning, if the use a Pioneer blade, it's going to look goofy sitting in a single layer.
Sent from my XT1635-01 using Tapatalk
???
Unless I've missed something, your Solo will look perfectly symmetrical and will look great. Mine do (I have two). When you get it, compare it to another Pioneer or Farmer if you have one. With the blades open, look at them down their spines...you will be able to see the difference. :) -
Will do. Thanks again.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login