EDC Question
-
@50ft-trad said:
If both blades are ground symmetrically and are straight, they are going to both try to be in the middle of the same slot and each is going to slam down on the spine of the other.Not good.In order for them to sit at one side of the slot or the other so the blades sit side by side, there are two options. The first is an assymetrical grind, so one side of the blade is straight and parallel with the liner, and the other side tapers in, leaving space for the other blade, or crink (bend) the blade so it sit's down one edge instead of the centre. Crinking is simply bending of a knife or scissor blade.
On my Pioneer Pruner (which is the one you asked about) both blades are assymetrically ground to create room for the other. On some of the older Solos, they apparently used a different blade which was ground symetrically so it fell in the middle of the slot. But that is a full set of tooling which will only ever be used for one knife, so it makes more (economic) sense, to now build the Solos simply using the assymetrically ground blade used in every other pioneer, so you only need one set of blade tooling for the whole line.
I hope that helps

Thank you so much. I understand now.
Sent from my XT1635-01 using Tapatalk
-
So there's a good chance that I'll get a Solo that looks sort of odd, with the blade being ground the way it is?
Meaning, if the use a Pioneer blade, it's going to look goofy sitting in a single layer.
Sent from my XT1635-01 using Tapatalk
-
@this_is_nascar said:
So there's a good chance that I'll get a Solo that looks sort of odd, with the blade being ground the way it is?Meaning, if the use a Pioneer blade, it's going to look goofy sitting in a single layer.
Sent from my XT1635-01 using Tapatalk
???
Unless I've missed something, your Solo will look perfectly symmetrical and will look great. Mine do (I have two). When you get it, compare it to another Pioneer or Farmer if you have one. With the blades open, look at them down their spines...you will be able to see the difference. :) -
Will do. Thanks again.
-
So is it confirmed that modern production Solos have a straight blade which is different from the asymmetrical blade on a Pioneer or Farmer? I think we need pictographic evidence to submit to the court!

-
I really hope mine has a straight blade. Anything else is going to look stupid on a single layered knife.
-
Assuming this Pioneer Solo is something I decide to EDC as a solution for my apple and food prep, it really changes my potential solutions to my original question that caused me to start this thread.
-
@GoatDragon said:
So is it confirmed that modern production Solos have a straight blade which is different from the asymmetrical blade on a Pioneer or Farmer? I think we need pictographic evidence to submit to the court!



-
@this_is_nascar said:
I really hope mine has a straight blade. Anything else is going to look stupid on a single layered knife.Get an Alox Bantam and you're good. You get the same slim knife, plus the bottle/can opener plus the screwdriver.

-
Mine's battered, but straight. Current model but over 10 years old.


-
Spoiler:
So is it confirmed that modern production Solos have a straight blade which is different from the asymmetrical blade on a Pioneer or Farmer? I think we need pictographic evidence to submit to the court!



So some of them have straight and some have asymmetrical blades?
-
I really hope mine has a straight blade. Anything else is going to look stupid on a single layered knife.
Get an Alox Bantam and you're good. You get the same slim knife, plus the bottle/can opener plus the screwdriver.

A Bantam is 84mm, as opposed to the 93mm of the Solo.
-
Spoiler:
So is it confirmed that modern production Solos have a straight blade which is different from the asymmetrical blade on a Pioneer or Farmer? I think we need pictographic evidence to submit to the court!



So some of them have straight and some have asymmetrical blades?
Well that sucks.
-
I currently have 11 OC and 21 NC Solos.
Of the OC, 7 have a symmetrical blade. All others are asymmetric.I've never had a current NC Solo in my hands with a symmetrical blade.

-
I currently have 11 OC and 21 NC Solos.
Of the OC, 7 have a symmetrical blade. All others are asymmetric.I've never had a current NC Solo in my hands with a symmetrical blade.

Wow. You have a passion for the Solo, don't you?
Oh yeah. The Alox Solo is my utility knife in the freetime and also one of my favorite knives to collect.
-
@Ronald Schröder said:
I currently have 11 OC and 21 NC Solos.
Of the OC, 7 have a symmetrical blade. All others are asymmetric.I've never had a current NC Solo in my hands with a symmetrical blade.

So now you know that they do exist! 8) My father has one too.
Yes, learned something again. Is that from your father also around 10 years old?
-
@Ronald Schröder said:
I currently have 11 OC and 21 NC Solos.
Of the OC, 7 have a symmetrical blade. All others are asymmetric.I've never had a current NC Solo in my hands with a symmetrical blade.

So now you know that they do exist! 8) My father has one too.
Yes, learned something again. Is that from your father also around 10 years old?
Yes, I bought the two of them at the same time from the same dealer. I could go visit him next Saturday, see if he still got some.
-
@Ronald Schröder said:
@Ronald Schröder said:
I currently have 11 OC and 21 NC Solos.
Of the OC, 7 have a symmetrical blade. All others are asymmetric.I've never had a current NC Solo in my hands with a symmetrical blade.

So now you know that they do exist! 8) My father has one too.
Yes, learned something again. Is that from your father also around 10 years old?
Yes, I bought the two of them at the same time from the same dealer. I could go visit him next Saturday, see if he still got some.
I'd be interested in knowing if they were still around.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login