Executive Scales falling off
-
$5? What are you waiting for?

I can get a new recruit for $13 bucks. If I put the $5 in the letter are they going to "loose" it? pluss I have to apply shipping costs. Its not a big deal but is it really worth it when I can just use epoxy?
Sent from my iPhone using Tapatalk
If you use epoxy, make sure you only apply a small amount in each of the 4 rivet holes on the scales. It will be more than enough to hold securely and won't give you too much trouble to take them off if you decide to change them later
-
$5? What are you waiting for?

I can get a new recruit for $13 bucks. If I put the $5 in the letter are they going to "loose" it? pluss I have to apply shipping costs. Its not a big deal but is it really worth it when I can just use epoxy?
Sent from my iPhone using Tapatalk
If you use epoxy, make sure you only apply a small amount in each of the 4 rivet holes on the scales. It will be more than enough to hold securely and won't give you too much trouble to take them off if you decide to change them later
Thanks that will be my project tonight
Sent from my iPhone using Tapatalk
-
Super glue is a bad bet. It is way too brittle. The scales need to flex ever so slightly when the t&t are inserted and removed, and this action will break the super glue. Also given it's viscosity it can smurf up the pivots.
I use goop glue for sale scales and it works perfectly.
-
Is the $5 for shipping within the US?
-
@NetsNJ said:
Super glue is a bad bet. It is way too brittle. The scales need to flex ever so slightly when the t&t are inserted and removed, and this action will break the super glue. Also given it's viscosity it can smurf up the pivots.I use goop glue for sale scales and it works perfectly.
What about epoxy? Any experience with using that on SAK scales?
-
Not personally, but I know others have. I imagine it is fine.
-
Super glue is a bad bet. It is way too brittle. The scales need to flex ever so slightly when the t&t are inserted and removed, and this action will break the super glue. Also given it's viscosity it can smurf up the pivots.
I use goop glue for sale scales and it works perfectly.
What about epoxy? Any experience with using that on SAK scales?
I've glued two vintage solid scales with epoxy (Araldite) with only one tiny amount on the scale rivet holes and it worked great

The idea is not to actually glue the whole contact surface of the scale to the liners (that would be silly IMHO...
), it's more like "replacing" the amount of cellidor removed (ripped) from the holes by the bushings when taking the scale off, that makes the scales not sit tightly any more when putting them back vs to when they where new. That small amount of epoxy will fill the lack of material and harden but yet retain great elasticity while also being adhesive to the rivet's. -
Yeah they wanted an additional $5 either included in the envelope or charged on a cc. They call it a handling fee. I could have risked it and not put the 5 but its not worth the hassle.
I actually attached them with a little of epoxy and so far so good. I think the initial issue is that the scales are a bit bent by where the toothpick and tweezers slide in.
Sent from my iPhone using Tapatalk
-
Is the $5 for shipping within the US?
Yeah they wanted an additional $5 either included in the envelope or charged on a cc. They call it a handling fee. I could have risked it and not put the 5 but its not worth the hassle.
I actually attached them with a little of epoxy and so far so good. I think the initial issue is that the scales are a bit bent by where the toothpick and tweezers slide in.
Sent from my iPhone using Tapatalk
As others have said, that $5 seems to be a bargain. At least you still have that option in the future

-
Thats what I figured as well, if It would be more serious I wouldnt hesistate to excersize that option.
-
I was able to use my Super Tinker's scales after I took them off, one of them was a bit loose but now it has settled down. Go figure.
However I had less luck with my Executive. I used some electrical tape folded and glued on itself as a makeshift and really lazy solution. But it works, and it's not much thicker. You would have to be careful with the placement though, so it doesn't impede the scale tools from going in.Enviado do meu iPhone usando Tapatalk
-
4 small drops of blue Loktite worked well for me.
-
@Zhenchok said:
Thats what I figured as well, if It would be more serious I wouldnt hesistate to excersize that option.Turns out that the Victorinox repair shop in our country will replace scales for free if they determine that its manufacturing defect. Or will replace scales for minimal fee. I sent my Tinker and Bantam for possible warranty service. They said they will get back to me in a week if they will charge me or not for the scales replacement.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login