Kick, Fuse, Blast & Core Owners group club.
-
20170616_184319 by Poncho 65, on Flickr
20170616_184439 by Poncho 65, on Flickr
20170616_184512 by Poncho 65, on Flickr
20170616_184453 by Poncho 65, on Flickr -
I'm glad I found this club!

I hereby enter with the Kick that I found, if the powers that be let me.
Car boot sale find, my first _______ tool!

-
Welcome to the club Pablo
Great pics and great tool

Glad to see you got a plier based tool buddy

-
Thanks!
It's quite different from a SAK.
The Kick is little slimmer than a climber, but im my opinion, carries in the pocket unsuspended better than a climber, due to the width and length making it sit better.
Of course, using a suspension clip is still ideal for comfort.
It has great fiddle factor, like a SAK. Open the handles, close the handles, etc, it's quite fun. :)The small driver is very good

But I'm a bit irritated with the thickness of the large driver. Even though it's just a little wider than a SAK bottle opener, it's at least twice as thick, and won't fit into many of the slotted screws that the Vic Bottle opener fits in.

And it's not as good for prying duties either, thanks to the thickness!The 3D Philips... I think that the Victorinox SAK equivalent is better... Maybe I'm using it wrong, but it doesn't feel as capable, despite being bigger. :-\
Can opener gets a
, it doesn't leave a sharp edge behind. 
The pliers feel plenty capable.

And did I mention the fiddle factor? :D
-
Amici,
Once again, I'm in!!Cheers,
Serge

-
The Zytel inserts look so good on the BO and some of the Camo versions.

-
@sergemaster said:
Amici,
Once again, I'm in!!Cheers,
SergeAnother great one Serge

-
@Pablo O'Brien said:
The Zytel inserts look so good on the BO and some of the Camo versions.
Yes, the BO is great looking on them

The Phillips is better on this series to me than Vic
Yeah you must be doing it wrong

The look of the BO caused me to track down all of them with Zytel as well
Well not the Core yet anyways
:D -
@Pablo O'Brien said:
The Zytel inserts look so good on the BO and some of the Camo versions.

Yes, the BO is great looking on them

The Phillips is better on this series to me than Vic
Yeah you must be doing it wrong

The look of the BO caused me to track down all of them with Zytel as well
Well not the Core yet anyways
:DI could be wrong.

Tell me how you use the Philips on this?
It's my first multiplier and I've only had it since Saturday, and haven't REALLY tried using the Philips.
Handles open, closed, etc?
-
@Pablo O'Brien said:
@Pablo O'Brien said:
The Zytel inserts look so good on the BO and some of the Camo versions.

Yes, the BO is great looking on them

The Phillips is better on this series to me than Vic
Yeah you must be doing it wrong

The look of the BO caused me to track down all of them with Zytel as well
Well not the Core yet anyways
:DI could be wrong.

Tell me how you use the Philips on this?
It's my first multiplier and I've only had it since Saturday, and haven't REALLY tried using the Philips.
Handles open, closed, etc?
I usually leave it open with the Phillips side and the other half closed (leaving the tool as long as possible) and that gives more more leverage
I also use it L shaped and this provides good amount of torque as well 
I was just teasing though as I get good results from the LM and Vic drivers :D
-
I'd like a clam shell package opener/orange peeler tool thingy on my Kick. :)
As far as I know, I can either:Sharpen the can opener
Or
Make one out of the blade.
Advise?

How would I sharpen the can opener so it works effectively? It seems a little too thick to score oranges without squirting juice, even if it were sharp. And working on it may hamper its can opening ability?
My favoured option:
The blade will have to go in the long term, so I may as well turn it into somethingusefulinteresting. As it will have a thinner cutting part than the can opener, it should be able to cut more cleanly and easily.
Is there a particular shape that I should use as a guide when grinding? -
Just sharpen the first bit of the opener at a little bit less of an angle that what it is and you will be surprised at how well it opens packages

I think Steve had some pics of this but Photo bucket may have killed those links

If no pics are taken or you don't get what I am talking about then I will get a pic of mine that I have sharpened on my Rebar
It also still will function as a can opener
So you lose nothing and gain a function 
-
A pic would be nice when you can do it.

How much did you sharpen? -
I dropped and broke my phone yesterday and took me a while to activate a new one
Will try and get a pic of it up this evening or by Saturday at least
I only sharpened it an 1/8th of an inch on the end at a less sharp angle that what is already there and sharpened it until it was sharper than the opener and viola, a package cutter

-
Here is a link to the link of some of Steve's pics of the can opener sharpening if I don't get around to getting the pic quick enough for you

/post/1504578
Don't know if there are any closer or better shots of it in there or not
but it will give you the basic idea hopefully 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
