The Rusty SAK
-
Seen a number of SAK files with rust on them (old Fisherman).
Earlier in this thread Pablo mentioned the file isn't stainless.
The latest version of the file is stainless steel...
Sent from my iPhone using Tapatalk
I stand corrected.

-
I have never seen a SAK, either in person or in pictures, with even a speck of rust on it (not counting the old models before they switched to stainless steel, of course).
So I have a challenge for you guys, with your massive collections. Show me a picture of a rusty stainless steel SAK. It doesn't matter how it got rusty, maybe it was left in a pool of acid for 50 years, I don't know. I just want to see if such a thing exists!
Carried in a pocket since I was a teenager. The blades show no rust. The corkscrew has light surface rust inside the coil(tried cleaning with soap water), but to its defence, the corkscrew has never been used. HOWEVER, the liners are severely corroded to the point the metal has begun to start weakening and cracking. I removed the scale to show how bad it is. BUT, as it stands, the SAK still functions and will be carried until it breaks.
I pictured where the metal is the worst.
This was not an intentional experiment. I have carried this particular knife for over a decade. I assume salty sweat from my leg was mostly responsible. This knife is sentimental, so I hope the corrosion doesn't cause the thing to break.
I have seen this kind of corrosion on SAKs before, but it was only on the frame and liners.
Low carbon content in SAK steel makes them almost rust proof, but makes the steel a little softer. Makes them easy to sharpen and polish though. :)
Please note: I work on antique furniture and spend a lot of time outside during the summer. That means hours of sweat everyday for months on end for years. Normal indoor work environments probably won't cause this kind of damage.
My other SAKs are shelf queens and won't ever see corrosion.
Strange how the aluminium liners corrode, huh? :-\
-
@Pablo O'Brien said:
Seen a number of SAK files with rust on them (old Fisherman).
Earlier in this thread Pablo mentioned the file isn't stainless.
The latest version of the file is stainless steel...
Sent from my iPhone using Tapatalk
I stand corrected.

Even then it'll appear as if the file rusts as there will be metal particles stuck in the file after filing down some carbon holding steel.
So basicaly the file doesn't rust, but the particles caught inside will.
-
You can see rust very often on these knives: some Victorinox knives from middle 1970 (rust spots)


and some blue Fishermans with out gassing scales

-
@Pablo O'Brien said:
Strange how the aluminium liners corrode, huh? :-\A chain is only as strong as its' weakest link. It is not rust, I know that(and did not claim it was rust, except for the rust inside the cork screw), but liner/frame corrosion is a major factor in the performance of a knife. The SAK I pictured has been significantly compromised by the aluminum corrosion. I felt it important to convey my experience so people can take steps to prevent this from happening to the SAKs they carry day to day. In hindsight, I would have kept a coat of oil on mine from day one, but I did not know much about knife maintenance until I was in my early 20s.
-
So about a week in things were looking ugly for sea water blade:

Ding ding ding, we have a winner! Rusty SAK stainless is indeed possible.
...Darn, I was hoping this was an impossible challenge, and it was solved in less than 20 minutes.

Salt will make stainless rust. We were trained to be diligent about washing and oiling our SCUBA dive knives because of this.
I've also seen stainless steel rust from being soaked in a sink overnight with Dawn dish soap. I'm not sure if it was something in the Dawn or the chemistry of the tap water, but I've seen it more than once.Sent from my iPhone using Tapatalk
-
I've come across some rusty ones at the fleamarket. I can only imagine neglect as the reason for such condition. Here is one I found a while ago. This is about what I typically see. </topic/46916
-
Seen a number of SAK files with rust on them (old Fisherman).
Earlier in this thread Pablo mentioned the file isn't stainless.
I have some small rust spots on my Craftsman file. Dat 'splains it!
Sent from my iPhone using Tapatalk
-
I sure wouldnt enjoy SAKs near as much if stainless steel wasnt invented. Its not perfect but you sure have to try hard to get some rust. You can get a faster reaction if the blade it touching some non stainless steel too. I do this by accident alot when leaving SAK parts on my old vice. It gets wet alot and if the SAK part is sitting on that old vice in the bare steel area and is also wet, it will show rust the next day. Very shallow rust though and easy to remove, but it does happen.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
