Specific Multitool recommendation
-
Doc Allen Versadriver. http://docallensversatool.com/
Fraction the cost, and very hard to damage. I've been using one 12 or 13 years and put it to some pretty solid use including running a length of rebar through the loop as a breaker bar. Sockets, 1/4" bits, and with the help of various adapters, 4mm bits and exacto blades. And those are some of the less weird things I've rigged it for. Hyper versatile, if I had to choose to lose my Leatherman or my Doc Allen I'd be hard pressed to choose.
Other sources
https://countycomm.com/products/versatool-pro-driver-set
https://www.walmart.com/ip/Doc-Allen-s-VersaTool-Kit/38601669
https://www.survivalresources.com/doc-allen-s-versatool.htmlIn the standard pouch, I used to carry 2 racks of bits, 1/2 and 3/8" sockets, a socket extender to replace the bit driver extender (more stable), and a pin vise with precision screwdriver bits and a small drill bit to use as a gimlet. I've since moved onto a larger pouch, but the factory pouch is a little smaller than most wallets. Might not be as flashy as the Urban EDC, but I would trust it with my life.
-
@ironraven said:
Doc Allen Versadriver. http://docallensversatool.com/Fraction the cost, and very hard to damage. I've been using one 12 or 13 years and put it to some pretty solid use. Sockets, 1/4" bits, and with the help of various adapters, 4mm bits and exacto blades. And those are some of the less weird things I've rigged it for. Hyper versatile, if I had to choose to lose my Leatherman or my Doc Allen I'd be hard pressed to choose.
Never seen this before! pretty neat looking! Thanx!
-
There is always the Bit Bar, if you have the coin.
But you could get the bit-kit from Victorinox and if you buy it with a Spirit you will have one of the most capable Multitools and a sheath for it :D
-
Cybertool 29.

-
@hiraethus said:
Cybertool 29.
^^^^^
ThisAlthough a Cybertool 29 costs more here then a Cybertool 34, which has more functions...

If budget isn't an issue, grab a Cybertool 41.
It's my ultimate SAK...So depending on the situation over there I'd go with one of these.
Still need a 29 to complete the set though...
And a CTLite
-
Cybertool 29.

^^^^^
ThisAlthough a Cybertool 29 costs more here then a Cybertool 34, which has more functions...

If budget isn't an issue, grab a Cybertool 41.
It's my ultimate SAK...So depending on the situation over there I'd go with one of these.
Still need a 29 to complete the set though...
And a CTLite
Don't forget the modded variations.

Like the Technologist:
Detron's love and rablings of his Victorinox Technologist (Cyber-Yeoman):D
-
@Pablo O'Brien said:
Cybertool 29.

^^^^^
ThisAlthough a Cybertool 29 costs more here then a Cybertool 34, which has more functions...

If budget isn't an issue, grab a Cybertool 41.
It's my ultimate SAK...So depending on the situation over there I'd go with one of these.
Still need a 29 to complete the set though...
And a CTLite
Don't forget the modded variations.

Like the Technologist:
Detron's love and rablings of his Victorinox Technologist (Cyber-Yeoman):D
I'm not a demanding person

-
@Etherealicer said:
There is always the Bit Bar, if you have the coin.But you could get the bit-kit from Victorinox and if you buy it with a Spirit you will have one of the most capable Multitools and a sheath for it :D
That DOES look pretty neat!
-
I carry the Topeak Ratchet Rocket, it's basically the same as the Victorinox ratchet but a bit slimmer. I does require that you carry a bit-kit but so do a lot of the others that has been posted.
-
How does the first one hold up to putting any pressure on it? I would have thought it would it would just give and you'd push the last of the bits out of the back.
The True Utility Mini Driver might be of interest too.

-
@Fortytwo said:
How does the first one hold up to putting any pressure on it? I would have thought it would it would just give and you'd push the last of the bits out of the back.The True Utility Mini Driver might be of interest too.

Got one of these, but my bits are double: the phillips in one piece and the straight in another. Work pretty well.

-
@Fortytwo said:
How does the first one hold up to putting any pressure on it? I would have thought it would it would just give and you'd push the last of the bits out of the back.The True Utility Mini Driver might be of interest too.

This one is nice. is there a piece to hold the bits? I don't necessarily need it on my keychain but do want to keep it in my bag or pocket..
-
How does the first one hold up to putting any pressure on it? I would have thought it would it would just give and you'd push the last of the bits out of the back.
The True Utility Mini Driver might be of interest too.

This one is nice. is there a piece to hold the bits? I don't necessarily need it on my keychain but do want to keep it in my bag or pocket..
They are kept inside the driver.
-
Just saw this on Facebook... Looks pretty neat! Reminds me of a Kubaton!
A bit weary about ordering something off Kickstarter though... Anyone have experience ordering anything from there and actually receiving it?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
They both look capable but I like the look of the bottom one better