SAK's - Corkscrew or Phillips?
-
Teamwork works

.jpg)
-
Why choose? Compact=left front pocket, Tinker= right front pocket

-
@Danjo said:
Why choose? Compact=left front pocket, Tinker= right front pocketAww maann...
Just when i'm torn between my small tinker and my tourist and i'm trying to convince myself to rotate between the two and leave one at home while carrying another you throw this one.... :ahhh :ahhhHow can i not carry both now... you tell me...

-
Why choose? Compact=left front pocket, Tinker= right front pocket
Aww maann...
Just when i'm torn between my small tinker and my tourist and i'm trying to convince myself to rotate between the two and leave one at home while carrying another you throw this one.... :ahhh :ahhhHow can i not carry both now... you tell me...

LOL. Yeah, sorry man.
-
Both really is the right answer

This four layer mod was my EDC for well over three years. She has a lot of miles on her. But somehow the inline phillips started to get on my nerves. It never failed me but if I had more than one or two screws to deal with I often found myself going for a better formed phillips driver (if available), one that really lets you know that it is firmly in place and doesn't require as much force to keep it from camming out. So I ended up putting the maratac phillips screw key on my keychain and a fresnel lens in my wallet and went back to a three layer SAK.
-
Why choose? Compact=left front pocket, Tinker= right front pocket
Aww maann...
Just when i'm torn between my small tinker and my tourist and i'm trying to convince myself to rotate between the two and leave one at home while carrying another you throw this one.... :ahhh :ahhhHow can i not carry both now... you tell me...

LOL. Yeah, sorry man.
:D

-
I used to be hard against the corkscrew. Couldn't see any reasonable modern use for it. For opening bottles of wine, it's marginal at best and requires a strong grip and shoulder strength since there is no good lever in it. Holding a mini driver is OK...cute little trick, but that doesn't justify the presence of the tool itself. I was a "persecutor of the church", if you will. Really detested the corkscrew.
Now, I see it differently. For campsite work, woodwork, I think it could be more useful than the Phillips.
It may be possible to bore into softer wood (e.g. of a tree trunk or log) and use the entire SAK as a tie off or anchor for something. Might not want to trust your body weight over a cliff with it, but it could have multiple uses.
So I stopped hating the tool. Now I look at it as a possible option to carry on the bush.
Sent from my iPhone using Tapatalk
-
I'm just gonna quote myself here if that is OK

@theonew said:
The back spring phillips is all FAIL. The shaft is too thick to fit into most recessed screw slots where its modest reach might be useful. It only works if there are no obstructions around it. And when in the rare case that it does work, it is incredibly cumbersome to use, having to keep changing hand positions for each turn. Also it fails easily if anything more than a small amount of torque is used.Basically it is a single use tool that fails in more applications than it succeeds in. A dreadful waste of space.
Now compare that to the multi-purpose corkscrew and multi-purpose mini-driver:
Corkscrew
/topic/40053
/post/1243349
/post/460308Mini-driver
/post/1455211
/post/1450311 -
Might as well. I always liked that vid. 👍
-
@Tired_Yeti said:
I used to be hard against the corkscrew. Couldn't see any reasonable modern use for it. For opening bottles of wine, it's marginal at best and requires a strong grip and shoulder strength since there is no good lever in it. Holding a mini driver is OK...cute little trick, but that doesn't justify the presence of the tool itself. I was a "persecutor of the church", if you will. Really detested the corkscrew.Now, I see it differently. For campsite work, woodwork, I think it could be more useful than the Phillips.
It may be possible to bore into softer wood (e.g. of a tree trunk or log) and use the entire SAK as a tie off or anchor for something. Might not want to trust your body weight over a cliff with it, but it could have multiple uses.
So I stopped hating the tool. Now I look at it as a possible option to carry on the bush.
Sent from my iPhone using Tapatalk
I approve of this message.
-
@El Corkscrew said:
I used to be hard against the corkscrew. Couldn't see any reasonable modern use for it. For opening bottles of wine, it's marginal at best and requires a strong grip and shoulder strength since there is no good lever in it. Holding a mini driver is OK...cute little trick, but that doesn't justify the presence of the tool itself. I was a "persecutor of the church", if you will. Really detested the corkscrew.
Now, I see it differently. For campsite work, woodwork, I think it could be more useful than the Phillips.
It may be possible to bore into softer wood (e.g. of a tree trunk or log) and use the entire SAK as a tie off or anchor for something. Might not want to trust your body weight over a cliff with it, but it could have multiple uses.
So I stopped hating the tool. Now I look at it as a possible option to carry on the bush.
Sent from my iPhone using Tapatalk
I approve of this message.

And what makes you the godfather of cor...?Never mind

-
@Tired_Yeti said:
For opening bottles of wine, it's marginal at best and requires a strong grip and shoulder strength since there is no good lever in itYou don't have to pull on the corkscrew, you can screw it in then wrap your hand around the neck of the bottle, snug it up to the bottom of your knife so the end with the corkscrew cutout rests in the space between your thumb and fingers, and push up against it. You get good leverage and can work the cork out easily.
-
I love both, I wish vic made a Drunk/Climber. Lord know there are some out there...
-
For opening bottles of wine, it's marginal at best and requires a strong grip and shoulder strength since there is no good lever in it
You don't have to pull on the corkscrew, you can screw it in then wrap your hand around the neck of the bottle, snug it up to the bottom of your knife so the end with the corkscrew cutout rests in the space between your thumb and fingers, and push up against it. You get good leverage and can work the cork out easily.
True, I've done it that way a couple times too (although I forgot about that until you mentioned it), but I still consider it marginal compared to a dedicated corkscrew. I don't really drink alcohol often so for me, I rarely utilize a corkscrew. I've started to see the tool as a screw shaped piece of steel with a sharp tip. Perhaps it has limited utility, but I'm determined to find uses for it.
The Phillips is easy to utilize, of course; although, it's seems like it's sort a "one trick pony".Sent from my iPhone using Tapatalk
-
Personally I prefer the corkscrew. Not that I drink a lot of wine but as others stated a Corkscrew can be used in many situations, when I used the screwdriver on a tinker it felt like it should have been on the side and not the middle.
Sent from my iPhone using Tapatalk
-
@Zhenchok said:
...when I used the screwdriver on a tinker it felt like it should have been on the side and not the middle.I think the Phillips was an afterthought. I think they just replaced the corkscrew on a few models with it. The corkscrew has to be in the middle to work. At least that's my uneducated assumption.
Sent from my iPhone using Tapatalk
-
@Tired_Yeti said:
I used to be hard against the corkscrew. Couldn't see any reasonable modern use for it. For opening bottles of wine, it's marginal at best and requires a strong grip and shoulder strength since there is no good lever in it. Holding a mini driver is OK...cute little trick, but that doesn't justify the presence of the tool itself. I was a "persecutor of the church", if you will. Really detested the corkscrew.Now, I see it differently. For campsite work, woodwork, I think it could be more useful than the Phillips.
It may be possible to bore into softer wood (e.g. of a tree trunk or log) and use the entire SAK as a tie off or anchor for something. Might not want to trust your body weight over a cliff with it, but it could have multiple uses.
So I stopped hating the tool. Now I look at it as a possible option to carry on the bush.
Sent from my iPhone using Tapatalk
I used to be firmly in that camp too, absolutely loved the Philips (and Tinker line) and hated the corkscrew because of the phillips felt smoother and didn't sticked out of the tool, and a SD is way more useful than a corkscrew (at least to "Tinkering" 'ol me...
), after messing up the Philips on one of my super tinkers with moderate torque some time ago, my opinion change a bit about the usefulness on that specific Philips on that location. But i kept liking the Phillips for light use only and especially for it's looks and the way it makes the sak slimmer and smoother. So i continued to favor Philips models vs corkscrew for a while.
Lately my opinion change, and i'm very much split between the two, i've even been carrying more corkscrew models than Philips models these days.The corkscrew is more because of the classic look, not really for the terrible need for it or having the micro SD there. Either one of them id more for the looks or feel than actual usefulness for me these days.
As far as SD goes, i always carry my modified bit's on my little coin pouch, so i really have no actual need of use for the backside Phillips, as for the corkscrew i really don't have mush need for it as a corkscrew as i don't drink whine often and if i do i have dedicated ones to use. As a multi purpose tool it can come in handy but it's not essential. As for the micro SD it comes in handy and i use it, but i don't actually mind very much if i can't carry it physically on the sak, besides that one of the bits i carry is the same size as Vic's micro SD, so that is always covered if i carry corkscrew or Phillips models.One of the things i've come to realize is, even if corkscrew models don't feel as smooth on the hand as the corkscrew ones, a corkscrew model with the micro SD fitted feels ok, and actualy provide a better grip on the Sak overall than the Phillips ones

Like i've said, for me it's an even split between the two, but more for looks and feel than actual usability. I really only "need" on a 84/91mm sak for edc is the blades, opening layer and preferably an awl, everything else is just a bonus...

-
@MacGyver said:
...I really only "need" on a 84/91mm sak for edc is the blades, opening layer and preferably an awl, everything else is just a bonus...
So you could happily get by with a Pioneer?
I think the minimum for me would either be a Pioneer X for the scissors or a Farmer for the saw. If I was truly limited to one for life, I'd take the Farmer. IMO, a sharp blade can handle jobs the scissors are for, but it couldn't handle the job of a saw.
So when it boils down, I guess I can manage without either the corkscrew or the side mounted #2 Phillips--as long as I can have a saw.Sent from my iPhone using Tapatalk
-
Philips all the way. I've got the fieldmaster for that reason.
If and when they come out with the farmer X I will EDC that when possible. The fieldmaster is a bit more cuddly than a alox counterpart and thus less likely to freak people out.
I might also like a 84 mm version of fieldmaster if it exsisted...

-
@MacGyver said:
...I really only "need" on a 84/91mm sak for edc is the blades, opening layer and preferably an awl, everything else is just a bonus...
So you could happily get by with a Pioneer?
I think the minimum for me would either be a Pioneer X for the scissors or a Farmer for the saw. If I was truly limited to one for life, I'd take the Farmer. IMO, a sharp blade can handle jobs the scissors are for, but it couldn't handle the job of a saw.
So when it boils down, I guess I can manage without either the corkscrew or the side mounted #2 Phillips--as long as I can have a saw.Sent from my iPhone using Tapatalk
Well... yeah i could get by perfectly with a Pioneer, but it wouldn't be my first choice as a sak edc (regular urban at least). I'm a cellidor guy as far as sak's go, a Pioneer as much as i like it and as much as it is tougher than cellidor models, to me it just looks like a regular (high quality) pocket knife. I would prefer to edc a recruit over a Pioneer (or cadet) any day
A Swiss Army Knife to me has to have cellidor red handles with the inlaid cross and shield logo apart from everything else, it's just something deep in my mind from very early childhood that has stuck till this day.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login