Compact Appreciation
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=Mechanickal link=topic=62825.msg1549694#msg1549694 date=1504711868]
[quote author=Pablo O'Brien link=topic=62825.msg1549564#msg1549564 date=1504701427]
Very nice pfrsantos.
Just wondering, anyone in europe have a beaten up compact?
Why? So we won't notice when you abuse it?

Drat, they got me!

Lol, I want a compact with an intact/slightly twisted combo tool, the condition of the rest doesn't matter.
Would a Bantam work? It's a little smaller, but maybe it would solve your problem. It's easier to find.

It would, if I didn't need to enlarge the pivot hole of the combo tool. :-
[/quote]You will...I'm doing a Scientist mod now and have to enlarge the current spare combo tool I have to do it, otherwise I'll have to break down one of the parts-Compacts I have.
[/quote]I'll send you a 84mm tool with combo tool if you like Pablo.
Yes you'll need to drill it out but it's possible.
It's also useable in a 91mm tool but it'll sit a little lower.Will have to send my only Waiter for it though, but anything for you Pabs :)
-
@Pablo O'Brien said:
[quote author=Pablo O'Brien link=topic=62825.msg1549707#msg1549707 date=1504712526]
[quote author=Mechanickal link=topic=62825.msg1549694#msg1549694 date=1504711868]
[quote author=Pablo O'Brien link=topic=62825.msg1549564#msg1549564 date=1504701427]
Very nice pfrsantos.
Just wondering, anyone in europe have a beaten up compact?
Why? So we won't notice when you abuse it?

Drat, they got me!

Lol, I want a compact with an intact/slightly twisted combo tool, the condition of the rest doesn't matter.
Would a Bantam work? It's a little smaller, but maybe it would solve your problem. It's easier to find.

It would, if I didn't need to enlarge the pivot hole of the combo tool. :-
[/quote]You will...I'm doing a Scientist mod now and have to enlarge the current spare combo tool I have to do it, otherwise I'll have to break down one of the parts-Compacts I have.
[/quote]I'll send you a 84mm tool with combo tool if you like Pablo.
Yes you'll need to drill it out but it's possible.
It's also useable in a 91mm tool but it'll sit a little lower.Will have to send my only Waiter for it though, but anything for you Pabs :)
[/quote]
Thank you for the extremely generous offer, but no thank you.
I'll buy one on Amazon or find one at the boot sales in good time.
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=pfrsantos link=topic=62825.msg1549709#msg1549709 date=1504712627]
[quote author=Pablo O'Brien link=topic=62825.msg1549707#msg1549707 date=1504712526]
[quote author=Mechanickal link=topic=62825.msg1549694#msg1549694 date=1504711868]
[quote author=Pablo O'Brien link=topic=62825.msg1549564#msg1549564 date=1504701427]
Very nice pfrsantos.
Just wondering, anyone in europe have a beaten up compact?
Why? So we won't notice when you abuse it?

Drat, they got me!

Lol, I want a compact with an intact/slightly twisted combo tool, the condition of the rest doesn't matter.
Would a Bantam work? It's a little smaller, but maybe it would solve your problem. It's easier to find.

It would, if I didn't need to enlarge the pivot hole of the combo tool. :-
[/quote]You will...I'm doing a Scientist mod now and have to enlarge the current spare combo tool I have to do it, otherwise I'll have to break down one of the parts-Compacts I have.
[/quote]I'll send you a 84mm tool with combo tool if you like Pablo.
Yes you'll need to drill it out but it's possible.
It's also useable in a 91mm tool but it'll sit a little lower.Will have to send my only Waiter for it though, but anything for you Pabs :)
[/quote]
Thank you for the extremely generous offer, but no thank you.
I'll buy one on Amazon or find one at the boot sales in good time.
[/quote]Ok, good...Otherwise I'd have to get my own drinks.

-
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?
-
@Pablo O'Brien said:
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?
Only if yer not going to need it Mags.

Not unless I start appreciating the combo tool, which I won't :D
-
@Pablo O'Brien said:
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?
Only if yer not going to need it Mags.

Not unless I start appreciating the combo tool, which I won't :D
Good point. :D
In my particular case, the combo tool is the best of a bad lot. -
@Pablo O'Brien said:
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?
Only if yer not going to need it Mags.

Not unless I start appreciating the combo tool, which I won't :D
Have you tried opening a can of beans with it? after a hard day at work? It's like greased lightning ⚡
-
@Pablo O'Brien said:
@Pablo O'Brien said:
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?
Only if yer not going to need it Mags.

Not unless I start appreciating the combo tool, which I won't :D
Good point. :D
In my particular case, the combo tool is the best of a bad lot.Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.
The only limit is your imagination. Get set, GO!
-
@El Corkscrew said:
@Pablo O'Brien said:
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?
Only if yer not going to need it Mags.

Not unless I start appreciating the combo tool, which I won't :D
Have you tried opening a can of beans with it? after a hard day at work? It's like greased lightning ⚡
I will give it a try for me beans on toast (keep hearing your Ross accent when I say that :D )
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=magentus link=topic=62825.msg1549828#msg1549828 date=1504722302]
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?Only if yer not going to need it Mags.

Not unless I start appreciating the combo tool, which I won't :D
Good point. :D
In my particular case, the combo tool is the best of a bad lot.Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.
The only limit is your imagination. Get set, GO!
[/quote]
How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? :ahhh
-
@El Corkscrew said:
@Pablo O'Brien said:
[quote author=magentus link=topic=62825.msg1549828#msg1549828 date=1504722302]
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?Only if yer not going to need it Mags.

Not unless I start appreciating the combo tool, which I won't :D
Have you tried opening a can of beans with it? after a hard day at work? It's like greased lightning ⚡
I will give it a try for me beans on toast (keep hearing your Ross accent when I say that :D )
[/quote]
Now you're making me want the combo tool baad, just to try opening a can with it. :ahhh -
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=Pablo O'Brien link=topic=62825.msg1549840#msg1549840 date=1504724386]
[quote author=magentus link=topic=62825.msg1549828#msg1549828 date=1504722302]
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?Only if yer not going to need it Mags.

Not unless I start appreciating the combo tool, which I won't :D
Good point. :D
In my particular case, the combo tool is the best of a bad lot.Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.
The only limit is your imagination. Get set, GO!
[/quote]
How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? :ahhh
[/quote]
If you could guarantee it wouldn't twist even if I attempted to prise open the lid of my U Boat at a depth of 20 leagues. -
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=magentus link=topic=62825.msg1549842#msg1549842 date=1504724559]
[quote author=Pablo O'Brien link=topic=62825.msg1549840#msg1549840 date=1504724386]
[quote author=magentus link=topic=62825.msg1549828#msg1549828 date=1504722302]
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?Only if yer not going to need it Mags.

Not unless I start appreciating the combo tool, which I won't :D
Good point. :D
In my particular case, the combo tool is the best of a bad lot.Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.
The only limit is your imagination. Get set, GO!
[/quote]
How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? :ahhh
[/quote]
If you could guarantee it wouldn't twist even if I attempted to prise open the lid of my U Boat at a depth of 20 leagues.
[/quote]
Why on gods green earth are you inside the mantle? :ahhh
And who's your Internet provider? If they can give you an internet connection when you're in the mantle, I'm signing up to them.
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=magentus link=topic=62825.msg1549842#msg1549842 date=1504724559]
[quote author=Pablo O'Brien link=topic=62825.msg1549840#msg1549840 date=1504724386]
[quote author=magentus link=topic=62825.msg1549828#msg1549828 date=1504722302]
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?Only if yer not going to need it Mags.

Not unless I start appreciating the combo tool, which I won't :D
Good point. :D
In my particular case, the combo tool is the best of a bad lot.Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.
The only limit is your imagination. Get set, GO!
[/quote]
How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? :ahhh
[/quote]
If you could guarantee it wouldn't twist even if I attempted to prise open the lid of my U Boat at a depth of 20 leagues.
[/quote]We guarantee!Now go and try!
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=Pablo O'Brien link=topic=62825.msg1549847#msg1549847 date=1504724943]
[quote author=magentus link=topic=62825.msg1549842#msg1549842 date=1504724559]
[quote author=Pablo O'Brien link=topic=62825.msg1549840#msg1549840 date=1504724386]
[quote author=magentus link=topic=62825.msg1549828#msg1549828 date=1504722302]
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?Only if yer not going to need it Mags.

Not unless I start appreciating the combo tool, which I won't :D
Good point. :D
In my particular case, the combo tool is the best of a bad lot.Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.
The only limit is your imagination. Get set, GO!
[/quote]
How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? :ahhh
[/quote]
If you could guarantee it wouldn't twist even if I attempted to prise open the lid of my U Boat at a depth of 20 leagues.
[/quote]
Why on gods green earth are you inside the mantle? :ahhh
And who's your Internet provider? If they can give you an internet connection when you're in the mantle, I'm signing up to them.
[/quote]
We can only get wifi in Torpedo tube 2 -
@Pablo O'Brien said:
[quote author=Pablo O'Brien link=topic=62825.msg1549847#msg1549847 date=1504724943]
[quote author=magentus link=topic=62825.msg1549842#msg1549842 date=1504724559]
[quote author=Pablo O'Brien link=topic=62825.msg1549840#msg1549840 date=1504724386]
[quote author=magentus link=topic=62825.msg1549828#msg1549828 date=1504722302]
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?Only if yer not going to need it Mags.

Not unless I start appreciating the combo tool, which I won't :D
Good point. :D
In my particular case, the combo tool is the best of a bad lot.Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.
The only limit is your imagination. Get set, GO!
[/quote]
How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? :ahhh
[/quote]
If you could guarantee it wouldn't twist even if I attempted to prise open the lid of my U Boat at a depth of 20 leagues.
[/quote]We guarantee!Now go and try!
[/quote]
OK, here goes noth gluggggggggggggggggggggg -
@Pablo O'Brien said:
[quote author=magentus link=topic=62825.msg1549855#msg1549855 date=1504725299]
[quote author=Pablo O'Brien link=topic=62825.msg1549847#msg1549847 date=1504724943]
[quote author=magentus link=topic=62825.msg1549842#msg1549842 date=1504724559]
[quote author=Pablo O'Brien link=topic=62825.msg1549840#msg1549840 date=1504724386]
[quote author=magentus link=topic=62825.msg1549828#msg1549828 date=1504722302]
Pabs hun, I have a slightly bent 84mm combo tool left over from a recent mod and I remembered I'm supposed to be sending you some alox scales and opener layer 'n' springs. Want me to include the Combo tool 'n' all?Only if yer not going to need it Mags.

Not unless I start appreciating the combo tool, which I won't :D
Good point. :D
In my particular case, the combo tool is the best of a bad lot.Why don't you throw caution to the wind, release your inner craftsman and invent the 'Pabs Tool' - It could do all sorts of tasks; ignite a flamethrower, open tins and bottles, prise legos apart, prepare a delicious souffle, press your underpants, de-tick a dog, and repair a trebuchet that tried to launch a Panzer Bjorn that was a touch too heavy for it.
The only limit is your imagination. Get set, GO!
[/quote]
How would you feel about the combo tool if it was made of the most twist resistant Ti alloy possible? :ahhh
[/quote]
If you could guarantee it wouldn't twist even if I attempted to prise open the lid of my U Boat at a depth of 20 leagues.
[/quote]We guarantee!Now go and try!
[/quote]
OK, here goes noth gluggggggggggggggggggggg
[/quote]
MAGS!!!!!!!! :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh :ahhh -
Yes! A groupmate over at our local Facebook group has a Golfer and he agreed to trade with a Wenger pouch I have. Pics he sent. Scissors need spring and scales need replacement but it looks good
[emoji16]


-
Love the Compact, perfect two layers SAK for me.

Sent from my A37f using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login