Compact Appreciation
-
A 91mm Golfer it is...
Still a nice score!
Thanks! I hope I'm still welcome in this thread

Well, that Golfer is very compact, so...
I'd say yes!
-
A 91mm Golfer it is...
Still a nice score!
Thanks! I hope I'm still welcome in this thread

Who uses that silly hook anyway????
Great knife! Just be careful! You'll soon need an 84mm Golfer, Compact, and Golfer with divot repair tool :ahhh
-
@El Corkscrew said:
A 91mm Golfer it is...
Still a nice score!
Thanks! I hope I'm still welcome in this thread

Who uses that silly hook anyway????
Great knife! Just be careful! You'll soon need an 84mm Golfer, Compact, and Golfer with divot repair tool :ahhh
An 84mm Golfer would be awesome!
Never even seen one though...
-
Thanks, guys! [emoji106]
I'm having a very hard time installing the spring, even after watching so many YouTube tutorials. My Golfer's scissor hole has no chamfer on one side, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


-
@El Corkscrew said:
A 91mm Golfer it is...
Still a nice score!
Thanks! I hope I'm still welcome in this thread

Who uses that silly hook anyway????
Great knife! Just be careful! You'll soon need an 84mm Golfer, Compact, and Golfer with divot repair tool :ahhh
A Compact is still in the crosshairs [emoji16]
-
You got your own caddy?! Cool!

The eyelets are great, you can make lots of different carry options with them.

-
@an0nemus said:
Thanks, guys! [emoji106]I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
-
@El Corkscrew said:
Thanks, guys! [emoji106]
I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
That's a pretty cool idea! I thought of the pliers to make the loop smaller, but hadn't thought about a way to make it regain it's form again.

-
@El Corkscrew said:
Thanks, guys! [emoji106]
I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
I usualy try inserting it from the other side if that occurs and use pliers to clamp them in.
Works every time -
@pfrsantos said:
You got your own caddy?! Cool!

The eyelets are great, you can make lots of different carry options with them.

Yeah, this is the Mini but I find it small for even a 2-layer SAK. I might get a nylon caddy soon ☺
-
@El Corkscrew said:
Thanks, guys! [emoji106]
I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
I tried making the spring loop smaller but still it won't fit. I should make it even smaller. I'll try again tomorrow and the nail tip (midnight here already, zzzzzzz) [emoji106]
-
@El Corkscrew said:
Thanks, guys! [emoji106]
I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
That's a pretty cool idea! I thought of the pliers to make the loop smaller, but hadn't thought about a way to make it regain it's form again.

It's really considerate of Victorinox to chamfer one side of the scissors hole where the spring is inserted [emoji106]
-
@El Corkscrew said:
Thanks, guys! [emoji106]
I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
I usualy try inserting it from the other side if that occurs and use pliers to clamp them in.
Works every timeTried this and am baffled how come it looks effortless in YouTube videos [emoji16]
-
@El Corkscrew said:
Thanks, guys! [emoji106]
I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
I usualy try inserting it from the other side if that occurs and use pliers to clamp them in.
Works every timeTried this and am baffled how come it looks effortless in YouTube videos [emoji16]
Like in this one? If you use the opening in the scissors hole to hold the spring just after the round tip, it might do the trick.
:think: :think:- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Place spring hole on scissors hole. Put pliers on. Clamp down.
Nothing?
Place spring on other side of scissors and retry. -
@El Corkscrew said:
A 91mm Golfer it is...
Still a nice score!
Thanks! I hope I'm still welcome in this thread

Who uses that silly hook anyway????
Great knife! Just be careful! You'll soon need an 84mm Golfer, Compact, and Golfer with divot repair tool :ahhh
An 84mm Golfer would be awesome!
Never even seen one though...
84mm Golfers show up every month or so on evil bay. I made a point of tracking them for a year and was able to get a few, primarily for the 84mm scissors. The ones in good shape will stay Golfers as I really like them. In fact, both sized Golfers are my favorite EDC when possible (otherwise it's a Manager or an Alox Cadet). Here are a couple of 84 vs 91 Golfer shots I did.



-
@El Corkscrew said:
[quote author=Mechanickal link=topic=62825.msg1550254#msg1550254 date=1504790403]
A 91mm Golfer it is...Still a nice score!
Thanks! I hope I'm still welcome in this thread

Who uses that silly hook anyway????
Great knife! Just be careful! You'll soon need an 84mm Golfer, Compact, and Golfer with divot repair tool :ahhh
An 84mm Golfer would be awesome!
Never even seen one though...
84mm Golfers show up every month or so on evil bay. I made a point of tracking them for a year and was able to get a few, primarily for the 84mm scissors. The ones in good shape will stay Golfers as I really like them. In fact, both sized Golfers are my favorite EDC when possible (otherwise it's a Manager or an Alox Cadet). Here are a couple of 84 vs 91 Golfer shots I did.

[/quote]USA-bay? -
@El Corkscrew said:
Thanks, guys! [emoji106]
I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
I will be installing a scissor spring later... I'll try to get some pics.
Sent from my iPhone using Tapatalk
-
@El Corkscrew said:
[quote author=an0nemus link=topic=62825.msg1550363#msg1550363 date=1504799199]
Thanks, guys! [emoji106]I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
I usualy try inserting it from the other side if that occurs and use pliers to clamp them in.
Works every timeTried this and am baffled how come it looks effortless in YouTube videos [emoji16]
Like in this one? If you use the opening in the scissors hole to hold the spring just after the round tip, it might do the trick.

https://www.youtube.com/watch?v=U9H_-jwSBsA
[/quote]This was actually the first video I saw; unfortunately my Golfer doesn't have a chamfered hole [emoji53] I'll try your suggestion later [emoji106]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login