Kick, Fuse, Blast & Core Owners group club.
-
@Poncho65 said:
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise :facepalm: They look even better in BO :whistle: :DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO :dd: :like:
:pok:
-
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
-
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
Coming from a SAK user, are locks necessary in a multitool?

-
@Pablo O'Brien said:
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
Coming from a SAK user, are locks necessary in a multitool?

On a plier based multi?
Yes!Comming from a SAK user ;)
-
@Pablo O'Brien said:
[quote author=Poncho65 link=topic=59329.msg1550862#msg1550862 date=1504874879]
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
Coming from a SAK user, are locks necessary in a multitool?

On a plier based multi?
Yes!Comming from a SAK user ;)
[/quote]
Why?
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=SteveC link=topic=59329.msg1550879#msg1550879 date=1504877176]
[quote author=Poncho65 link=topic=59329.msg1550862#msg1550862 date=1504874879]
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
Coming from a SAK user, are locks necessary in a multitool?

On a plier based multi?
Yes!Comming from a SAK user ;)
[/quote]
Why?
[/quote]Pinchy
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=Poncho65 link=topic=59329.msg1550894#msg1550894 date=1504878759]
[quote author=SteveC link=topic=59329.msg1550879#msg1550879 date=1504877176]
[quote author=Poncho65 link=topic=59329.msg1550862#msg1550862 date=1504874879]
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
Coming from a SAK user, are locks necessary in a multitool?

On a plier based multi?
Yes!Comming from a SAK user ;)
[/quote]
Why?
[/quote]Pinchy
[/quote]
The Kick has no locks(why I love it) and I haven't had any problems...
-
Are lock necessary on a MT?
I'd say yes for the drivers. The PST doesn't have locks either and while a wonderful tool its relegated to light use for me. Folding drivers are never a good thing. I'd say most MT are meant to be medium to heavy duty tools. The possibility of a driver folding on them is high which can be avoided by a locking mechanism or the obvious, a dedicated tool.
Designs have changed on those non locking MTs for a reason IMO. Sure we've gotten by, but is getting by enough? SAKs are light duty tools IMO. There is no need for them to have locks. It is interesting however that on some SAKs there are locks on the blades as well the driver.
-
Not necessary but sometimes very useful ;) :D For reasons mentioned above

-
I had no issues with the Zytel, and have owned all four tools with the Zytel handles. From new, the Zytel could have a few sharp corners, which whilst easily corrected with a bit of fine/semi-fine sandpaper/emery cloth, it did still mean that the tools weren't quite finished as they should be for proper comfort. Possibly the start of the decline in terms of their tool refinement, but nothing that a little TLC can't resolve.
I prefer the Kick and Fuse out of the line up. The Core and Blast are a bit too chunky in hand for me, particularly as the handles had already started to splay more than earlier tools (though not as much as the later ones). The innards on those two tools were great, but as pliers they could be a little unwieldy if gripping larger items. The option of the clip on the Kick was a good call, and meant this tool was both a modernised PST and Sideclip (albeit without the file from the PST). Non-locking drivers didn't enthuse a lot of users though. The Fuse was the gem of the lineup, and was certainly the right choice to make knifeless. When the dropped that tool they were without knifeless tools for several years, before they finally brought out the knifeless Rebar. I would go for a knifeless Fuse over the Rebar 100 times over.
The only tool I have left from this lineup, is a modified knifeless Fuse that I did myself. It loses the knife, can opener, medium flat driver, and lanyard ring, for the saw, file, and mini driver from a Blast plus a custom awl. It doesn't get much carry aside from going out on walks, where it still doesn't get much use, but is a great "just in case" tool, and I'm very happy to have it as part of the arsenal.

-

Another question. :D
Sorry, I'm new to the plier based MT scene.Correct me if I'm wrong, the Kick/Fuse/etc head is the same as the one on the original Charge?
Isn't the Kick considered a light duty tool, compared to the Charge? Does this mean that the plier head on the Kick is stronger than the handles, or the other way around on the original Charge? 
And yes, I'm aware that the Kick head is assymetrically ground. :)@50ft-trad said:
SnipThe only tool I have left from this lineup, is a modified knifeless Fuse that I did myself. It loses the knife, can opener, medium flat driver, and lanyard ring, for the saw, file, and mini driver from a Blast plus a custom awl. It doesn't get much carry aside from going out on walks, where it still doesn't get much use, but is a great "just in case" tool, and I'm very happy to have it as part of the arsenal.

Am I wrong or biased when I think that the Blast/Wave saw is not as good as the Victorinox Saw?
I'd like my Kick to be bladeless and a good combo for a SAK.
So no scissors and no saw(?). File is good though.
The screwdrivers can stay, they tend to have more reach than the Victorinox SAK equivalent, especially when you compare the small/medium driver to the one on the Victorinox can opener. So they complement each other.
And I need the leatherman can opener for making Lynn's wood gas can stoves, which the Victorinox equivalent is useless for. :P -
@Pablo O'Brien said:

Another question. :D
Sorry, I'm new to the plier based MT scene.Correct me if I'm wrong, the Kick/Fuse/etc head is the same as the one on the original Charge?
Isn't the Kick considered a light duty tool, compared to the Charge? Does this mean that the plier head on the Kick is stronger than the handles, or the other way around on the original Charge? 
And yes, I'm aware that the Kick head is assymetrically ground. :)@50ft-trad said:
Snip
The only tool I have left from this lineup, is a modified knifeless Fuse that I did myself. It loses the knife, can opener, medium flat driver, and lanyard ring, for the saw, file, and mini driver from a Blast plus a custom awl. It doesn't get much carry aside from going out on walks, where it still doesn't get much use, but is a great "just in case" tool, and I'm very happy to have it as part of the arsenal.

Am I wrong or biased when I think that the Blast/Wave saw is not as good as the Victorinox Saw?
I'd like my Kick to be bladeless and a good combo for a SAK.
So no scissors and no saw(?). File is good though.
The screwdrivers can stay, they tend to have more reach than the Victorinox SAK equivalent, especially when you compare the small/medium driver to the one on the Victorinox can opener. So they complement each other.
And I need the leatherman can opener for making Lynn's wood gas can stoves, which the Victorinox equivalent is useless for. :PYes, the Fuse/Blast (Not Kick) head is same as the Wave/Charge. Everything is breakable if you try hard enough ;)
The saw is good enough. I think the 91mm saw is better, but that doesn't mean the Blast saw is inadequate. The primary downside is that it's an inboard tool, which always presents the opposing handle as a bit of an obstacle compared to outboard tools where the opposing handle is out of the way. (If the Wave saw was the same length, thickness and tooth form as the Blast's, the Wave would still be the better performer due to the longer effective cutting stroke length) That said, many tools have been produced that way over the years, and there is still a loyal fanbase for inboard tools.
-
The plier head on all the tools from that era were the same except for the grind on the Kick and overall they are personally my favorite of all the different types

The saw in that series is also my personal favorite :D I use it with one handle open and it makes for a better handle and gets it out of the way at the same time

When I was first looking to replace my PST the Blast beat out the Wave when I was looking :o still ended up with a Wave later but except for the SE blade the tool compliment is very similar
I guess the Blast is also my favorite out of the 4 as well 
-
@Poncho65 said:
The plier head on all the tools from that era were the same except for the grind on the Kick and overall they are personally my favorite of all the different types
Agreed
although I do prefer the less splayed handle position of the older heads@Poncho65 said:
The saw in that series is also my personal favorite :D I use it with one handle open and it makes for a better handle and gets it out of the way at the same time
Not tried that, although I try not to put load on the plier end pivots unless using the pliers. I just feel happier that I'm not putting additional load/wear in that area, and I think the tool feels more stable/robust with the handles closed. Just personal taste

@Poncho65 said:
When I was first looking to replace my PST the Blast beat out the Wave when I was looking :o still ended up with a Wave later but except for the SE blade the tool compliment is very similar
I guess the Blast is also my favorite out of the 4 as well 
I started off with the Suspension, then the Swisstool, so the outboard aspects of the Wave's cutting edges (the third tool I tried) were a key deciding factor for me. I think the first fully inboard tool I tried was the Pulse, and I got rid of that pretty quickly. The leap to fully inbound, plus the dorky rocker locks was too much "wrong" for me to absorb :D It was some time later when I tried the Zytel's.
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=SteveC link=topic=59329.msg1550879#msg1550879 date=1504877176]
[quote author=Poncho65 link=topic=59329.msg1550862#msg1550862 date=1504874879]
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
Coming from a SAK user, are locks necessary in a multitool?

On a plier based multi?
Yes!Comming from a SAK user ;)
[/quote]
Why?
[/quote]Why not?It's not like it's adding weight.
-
@50ft-trad said:
**The plier head on all the tools from that era were the same except for the grind on the Kick and overall they are personally my favorite of all the different types **

Agreed
although I do prefer the less splayed handle position of the older headsWhy? :)
I can think of several main plier head types on LM tools off the side of my head.
The original PST head, also found on the Mini-tool, etc.
Also the type that was introduced along with the Zytel line and the original wave, charge etc, that you mentioned, in a few variations(the grind on the Kick, for example).
And the type on the Rebar with replaceable cutters, also the new charge head, new wave head, and the ST300 and MUT type. Not to mention the type on the budget models. And I probably forgot a few! :ahhhI don't have any experience with any of these besides the type on the Kick, so which are every bodies favorite type and why?

-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=Poncho65 link=topic=59329.msg1550894#msg1550894 date=1504878759]
[quote author=SteveC link=topic=59329.msg1550879#msg1550879 date=1504877176]
[quote author=Poncho65 link=topic=59329.msg1550862#msg1550862 date=1504874879]
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
Coming from a SAK user, are locks necessary in a multitool?

On a plier based multi?
Yes!Comming from a SAK user ;)
[/quote]
Why?
[/quote]Why not?It's not like it's adding weight.
[/quote]
Can't argue with that. :DAnother thing that could break?
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=Pablo O'Brien link=topic=59329.msg1550897#msg1550897 date=1504878819]
[quote author=Poncho65 link=topic=59329.msg1550894#msg1550894 date=1504878759]
[quote author=SteveC link=topic=59329.msg1550879#msg1550879 date=1504877176]
[quote author=Poncho65 link=topic=59329.msg1550862#msg1550862 date=1504874879]
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
Coming from a SAK user, are locks necessary in a multitool?

On a plier based multi?
Yes!Comming from a SAK user ;)
[/quote]
Why?
[/quote]Why not?It's not like it's adding weight.
[/quote]
Can't argue with that. :DAnother thing that could break?
[/quote]In the hands of Pablo The Destroyer?Yes...
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=Mechanickal link=topic=59329.msg1550899#msg1550899 date=1504879093]
[quote author=Pablo O'Brien link=topic=59329.msg1550897#msg1550897 date=1504878819]
[quote author=Poncho65 link=topic=59329.msg1550894#msg1550894 date=1504878759]
[quote author=SteveC link=topic=59329.msg1550879#msg1550879 date=1504877176]
[quote author=Poncho65 link=topic=59329.msg1550862#msg1550862 date=1504874879]
I like the Zytel and always have but when these tools were new it didn't go over so well across the board :ahhh many people didn't like them at all and I think k this led to their demise
They look even better in BO
:DI think they are way better than the new budget line that replaced them (Rev, Wingman and Sidekick) :ahhh
I like them well enough that I have all of them in SS and all but the Core in BO



The Core is also one of the few LM I have broken though
not once but twice :ahhh Locks both times 
Coming from a SAK user, are locks necessary in a multitool?

On a plier based multi?
Yes!Comming from a SAK user ;)
[/quote]
Why?
[/quote]Why not?It's not like it's adding weight.
[/quote]
Can't argue with that. :DAnother thing that could break?
[/quote]In the hands of Pablo The Destroyer?Yes...
[/quote]
Thats why the Kick is good for me. :D
Less stuff to break.
-
@Pablo O'Brien said:
@50ft-trad said:
**The plier head on all the tools from that era were the same except for the grind on the Kick and overall they are personally my favorite of all the different types **

Agreed
although I do prefer the less splayed handle position of the older headsWhy? :)
I can think of several main plier head types on LM tools off the side of my head.
The original PST head, also found on the Mini-tool, etc.
Also the type that was introduced along with the Zytel line and the original wave, charge etc, that you mentioned, in a few variations(the grind on the Kick, for example).
And the type on the Rebar with replaceable cutters, also the new charge head, new wave head, and the ST300 and MUT type. Not to mention the type on the budget models. And I probably forgot a few! :ahhhI don't have any experience with any of these besides the type on the Kick, so which are every bodies favorite type and why?

I prefer these because at the time they came out they were the strongest type out for this size tool in LM line and I have used them a lot
I have never felt as though I was going to break them
The ones that come on the PST are strong enough I am sure but putting them side by side with these I would go with these
The cutting edge for the wire cutters is also very good size and cut very well with the oval design of the head
Plus it is also personal preference :D The replaceable cutters are fine but I would rather have this type
I know I use a Rebar and others with replaceable cutters but if I had to cut wire more at work them I would go with the non replaceable pliers heads 
Now if we are talking g the bigger tools then I think one of my favs is the one on the OG Supertool and the ST 200 as it is a great pliers head as well
then a tie between the Core/OG Surge and Supertool 300/New Surge pliers head 
I know that doesn't seem to make sense but that's the way it is for me :D
Plus I don't like to make sense somtimes

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login