Surge Owners Club
-
Dropping it may have knocked something out of alignment with the saw
Because looking at mine the saw sits in there without curling up ???Hopefully you can get this sorted

-
@sergemaster said:
Amici,
Thanks for the thumbs up on the sheath..
Believe it or not, it's not a custom job, it's a factory. And it's offered directly from Maglite..
It fits the Surge and ST 300 perfectly, as well as the Swiss-tool. It's not really a good carry method for the Wave, Charge, or any of the mid sized tools. If you do, you will struggle a bit to remove it, especially in a pinch. Reason being, is that the pouch dimensions are better suited for the larger tools.
The cost, I paid about $21.00 USD with shipping for it. In retrospect after using it for a few days, I feel it was definitely well worth it.. Especially if you like to utilize a M.M. in tandem along with your large sized MT as I occasionally do. Especially when your MM pushes out a nice 272 lumens.
Overall construction is pretty good. The leather is supple, not at all thin, and yet not too thick. The fit and finish if the leather is also quite decent. I noticed that the pouch was breaking in nicely just after a few hours of regular use. It is made of 100% cowhide and right here in the US of A which for a production pouch/sheath I found to be a nice change from the foul smelling sheaths produced south of the border I have encountered lately. The stitching is made with nylon thread. I used a quick pass with some fire to weld any Irish pendants that were visibly present. No need to, but it's a habit I picked up from countless uniform inspections during my time in the service. Along with a quick rub of Huberds shoe grease for protection from the elements while I'm outdoors when in the field.
To make it better, the sheath also has two snaps on the back of the belt loop as so to make it removable from your belt at any given time. If your looking for a good large MT/MM carry combo, I recommend it..
Cheers,
SergeThanks for the info! I carry either a large tool and a 272Lumen 2xAA mag or a medium tool with a 111Lumen 2xAAA. The smaller MT with mag brand 2xAAA 111Lumen LED pouch (ordered separately ) is fine size-wise, but the bigger mag and large tool with separate belt holders is cumbersome, so I will be ordering a case like yours very soon!
The Swisstool challenge is over tomorrow and I would like to try that style belt holder out with my Surge and 272Lumen Mag. Both tool and light are top of their game. IMO And when I use the SwissTool, it is cool it will fit too! -
Amici,
Here are some additional shots of the combo sheath from Maglite or your viewing pleasure. Today we have the 300 standing in for the Surge, so my apologies to any thread purists that may be floating about, ready to burn me for heresy at the MT stake!!
Cheers,
Serge



-
Thank you, serge!
Looks awesome with the "surge"( :D) in it with the maglite.
I found them on amazon for $27. Seems like a good deal to me!
I see you store your MT locks down. I store mine locks up, so the break in will be easier for me I believe. I like the construction too! -
That is a very nice looking sheath
Love the quality of the construction
Thanks for all the extra pics of it

-
Dutch_Tooler wrote:
One question though - how does it hold up in practice e.g. when sitting in a car - is it in the way?
Amici,
For me, I really haven't experienced any real issues. But then again, just remember that this pouch utilizes a snap closure method. So if you do experience any issue as you mentioned, simply undo the snaps and remove the pouch when entering a vehicle or any other type situation. When on the job or off the clock, I simply just unsnap from my belt, and toss to the side until the next time.. It's just that simple.

Cheers,
Serge -
0907171120~2 by Poncho 65, on Flickr
0907171119_Burst01~2 by Poncho 65, on Flickr -
2017-09-08_09-51-46 by Poncho 65, on Flickr -
0909170816a~2 by Poncho 65, on Flickr -
@Poncho65 said:
0909170816a~2 by Poncho 65, on FlickrThat pliar head is one of LMs best. IMO
The same plair style is on my Core and in some ways is easier to use than the new style with 154cm replaceable cutters. Great photos and I really like the blue in the recesses on your newer one! I may need to get some enamel paint and get my Surge looking cool too.
-
Anyone have a Surge they can trade. I NEED one!!!
-
0909170816a~2 by Poncho 65, on FlickrThat pliar head is one of LMs best. IMO
The same plair style is on my Core and in some ways is easier to use than the new style with 154cm replaceable cutters. Great photos and I really like the blue in the recesses on your newer one! I may need to get some enamel paint and get my Surge looking cool too.
Thanks
Yes the plier head of the Surge/Core is a very great one indeed
The blue was accomplished with a blue Sharpie :D Just color it in like a 2 year old and then let it dry a few seconds then wipe if off and the recesses will stay blue 
-
0909170816a~2 by Poncho 65, on FlickrThat pliar head is one of LMs best. IMO
The same plair style is on my Core and in some ways is easier to use than the new style with 154cm replaceable cutters. Great photos and I really like the blue in the recesses on your newer one! I may need to get some enamel paint and get my Surge looking cool too.
Thanks
Yes the plier head of the Surge/Core is a very great one indeed
The blue was accomplished with a blue Sharpie :D Just color it in like a 2 year old and then let it dry a few seconds then wipe if off and the recesses will stay blue 
Easy enough indeed! Although I have access to fourty something enamel paints at work, but they would be harder to remove once done. I may try the sharpie and see how it looks, then a more permanent enamel later. TY for the sharpie idea! That'll help me decide on a permanent color later.

-
No problem

-
0911170859a by Poncho 65, on Flickr -
0912170840a~2 by Poncho 65, on Flickr
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
