Compact Appreciation
-
@El Corkscrew said:
Thanks, guys! [emoji106]
I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
I will be installing a scissor spring later... I'll try to get some pics.
Sent from my iPhone using Tapatalk
Looking forward to it Jaya man as I'll do another attempt tonight. My Golfer feels inadequate without a functional scissor
[emoji107]
As promised... This is how I do it... Others might have different approaches...
I placed the spring over the hole... positioning the stem (if this is the correct term) in the straight gap...

Used the pliers (in this case, my Spirit) to squeze it in the hole...

Wala...

But I'm not done yet... the spring doesn't sit in the center of the scissor handle...

Just gently tap it in with a hammer... I used a scriber, but a small nail can do the trick..

Done...

Sent from my iPhone using Tapatalk
-
I really like the Compact.
I'd buy a wood-scale version in a heartbeat. No question. But I'd really like to see an Alox variation. With red alox scales. (Victorinox, you listening?)

-
@El Corkscrew said:
[quote author=an0nemus link=topic=62825.msg1550363#msg1550363 date=1504799199]
Thanks, guys! [emoji106]I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
I will be installing a scissor spring later... I'll try to get some pics.
Sent from my iPhone using Tapatalk
Looking forward to it Jaya man as I'll do another attempt tonight. My Golfer feels inadequate without a functional scissor
[emoji107]
As promised... This is how I do it... Others might have different approaches...
I placed the spring over the hole... positioning the stem (if this is the correct term) in the straight gap...

Used the pliers (in this case, my Spirit) to squeze it in the hole...

Wala...

But I'm not done yet... the spring doesn't sit in the center of the scissor handle...

Just gently tap it in with a hammer... I used a scriber, but a small nail can do the trick..

Done...

Sent from my iPhone using Tapatalk
[/quote]Big thanks, Jaya! I'm actually stuck at picture two stage as I can't align the spring loop to the hole. Tolerance is too tight. I even watched a foreign language YouTube video try to enlarge the hole with corkscrew. See pic below. I can't wait to go home and try again tonight
-
[quote author=El Corkscrew link=topic=62825.msg1550370#msg1550370 date=1504799368]
[quote author=an0nemus link=topic=62825.msg1550363#msg1550363 date=1504799199]
Thanks, guys! [emoji106]I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
I will be installing a scissor spring later... I'll try to get some pics.
Sent from my iPhone using Tapatalk
Looking forward to it Jaya man as I'll do another attempt tonight. My Golfer feels inadequate without a functional scissor
[emoji107]
As promised... This is how I do it... Others might have different approaches...
I placed the spring over the hole... positioning the stem (if this is the correct term) in the straight gap...

Used the pliers (in this case, my Spirit) to squeze it in the hole...

Wala...

But I'm not done yet... the spring doesn't sit in the center of the scissor handle...

Just gently tap it in with a hammer... I used a scriber, but a small nail can do the trick..

Done...

Sent from my iPhone using Tapatalk
[/quote]Big thanks, Jaya! I'm actually stuck at picture two stage as I can't align the spring loop to the hole. Tolerance is too tight. I even watched a foreign language YouTube video try to enlarge the hole with corkscrew. See pic below. I can't wait to go home and try again tonight
[/quote]You sure there isn't an old piece of spring still inside? -
[quote author=jaya_man link=topic=62825.msg1550658#msg1550658 date=1504832526]
[quote author=El Corkscrew link=topic=62825.msg1550370#msg1550370 date=1504799368]
[quote author=an0nemus link=topic=62825.msg1550363#msg1550363 date=1504799199]
Thanks, guys! [emoji106]I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
I will be installing a scissor spring later... I'll try to get some pics.
Sent from my iPhone using Tapatalk
Looking forward to it Jaya man as I'll do another attempt tonight. My Golfer feels inadequate without a functional scissor
[emoji107]
As promised... This is how I do it... Others might have different approaches...
I placed the spring over the hole... positioning the stem (if this is the correct term) in the straight gap...

Used the pliers (in this case, my Spirit) to squeze it in the hole...

Wala...

But I'm not done yet... the spring doesn't sit in the center of the scissor handle...

Just gently tap it in with a hammer... I used a scriber, but a small nail can do the trick..

Done...

Sent from my iPhone using Tapatalk
[/quote]Big thanks, Jaya! I'm actually stuck at picture two stage as I can't align the spring loop to the hole. Tolerance is too tight. I even watched a foreign language YouTube video try to enlarge the hole with corkscrew. See pic below. I can't wait to go home and try again tonight
[/quote]You sure there isn't an old piece of spring still inside?
[/quote]Nothing there, nick

-
[quote author=an0nemus link=topic=62825.msg1550661#msg1550661 date=1504832941]
[quote author=jaya_man link=topic=62825.msg1550658#msg1550658 date=1504832526]
[quote author=El Corkscrew link=topic=62825.msg1550370#msg1550370 date=1504799368]
[quote author=an0nemus link=topic=62825.msg1550363#msg1550363 date=1504799199]
Thanks, guys! [emoji106]I'm having a very hard time installing the spring, even after watching so many YouTube tutorial. My Golfer's scisor hole has no chamfer, and the hole itself seems smaller than my newer SAKs. I'll try again tomorrow. In the meantime...
[emoji4]


I've run into that problem and addressed with making the spring loop smaller w/ needle nose pliers then using a small nail to bend it back once it's in place.
I will be installing a scissor spring later... I'll try to get some pics.
Sent from my iPhone using Tapatalk
Looking forward to it Jaya man as I'll do another attempt tonight. My Golfer feels inadequate without a functional scissor
[emoji107]
As promised... This is how I do it... Others might have different approaches...
I placed the spring over the hole... positioning the stem (if this is the correct term) in the straight gap...

Used the pliers (in this case, my Spirit) to squeze it in the hole...

Wala...

But I'm not done yet... the spring doesn't sit in the center of the scissor handle...

Just gently tap it in with a hammer... I used a scriber, but a small nail can do the trick..

Done...

Sent from my iPhone using Tapatalk
[/quote]Big thanks, Jaya! I'm actually stuck at picture two stage as I can't align the spring loop to the hole. Tolerance is too tight. I even watched a foreign language YouTube video try to enlarge the hole with corkscrew. See pic below. I can't wait to go home and try again tonight
[/quote]You sure there isn't an old piece of spring still inside?
[/quote]Nothing there, nick

[/quote]...

... -
Finally! Installed my first scissor spring successfully! All the tips here helped a lot. Thank you awl! [emoji106]

-
Finally! Installed my first scissor spring successfully! All the tips here helped a lot. Thank you awl! [emoji106]


Now cutting any paper on sight [emoji16]

-
Custard Compact today. For some reason yellow just seemed right.

-
A few days ago i decided to put a Compact in my pocket. Never carried it before. And i was surprised about it. Great set of tool for edc, light weight and i found that combotool is more convenient for me than the divided openers, only if i do not take its to use as a screwdriver and mini crowbar.

-
@Vovaster said:
A few days ago i decided to put a Compact in my pocket. Never carried it before. And i was surprised about it. Great set of tool for edc, light weight and i found that combotool is more convenient for me than the divided openers, only if i do not take its to use as a screwdriver and mini crowbar.
I think the Compact is an example of a SAK that punches way above its weight (to use a boxing analogy). It's only two layers and yet it has an excellent span of functionality. I carry it when I want a blade and scissors in a slim form factor. I am definitely a fan of the Compact.
Jim
-
A few days ago i decided to put a Compact in my pocket. Never carried it before. And i was surprised about it. Great set of tool for edc, light weight and i found that combotool is more convenient for me than the divided openers, only if i do not take its to use as a screwdriver and mini crowbar.

I think the Compact is an example of a SAK that punches way above its weight (to use a boxing analogy). It's only two layers and yet it has an excellent span of functionality. I carry it when I want a blade and scissors in a slim form factor. I am definitely a fan of the Compact.
Jim

-
Great set of tool for edc, light weight and i found that combotool is more convenient for me than the divided openers, only if i do not take its to use as a screwdriver and mini crowbar.

I think the Compact is an example of a SAK that punches way above its weight (to use a boxing analogy). It's only two layers and yet it has an excellent span of functionality. I carry it when I want a blade and scissors in a slim form factor. I am definitely a fan of the Compact.
Jim
+1 The Compact is special to me... it's the SAK that got me back in to SAK's. Believe it or not. El Corkscrew was a mostly just a Tinker man for most of my life. Now I scarcely carry a Tink... and feel like the Compact or Climber is "the" SAK for me... if we're talking practicality.
-
A wonderful EDC!
Victorinox Compact by NorCal Jim, on Flickr -
@NorCalJim said:
A wonderful EDC!
Victorinox Compact by NorCal Jim, on FlickrSo interesting background on a pic Jim.
-
A wonderful EDC!
Victorinox Compact by NorCal Jim, on FlickrSo interesting background on a pic Jim.
My wife has a 7 volume set of Van Gough letters and I sometimes use one of those volumes as a background. Lately, I have just been taking photos of SAKs on my hobby table.
Jim
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
