Large multitool
-
Maybe have a look at a Wenger Swissgrip if you can track one down. Fixed pliers, 1/4" bit driver, biggest saw available on a multitool. If that's not beefy enough for your needs, you might have to design a new one :D
Pic courtesy of sakwiki
-
Welcome to
good luck with your search
Hope you find what you are looking for 
-
The Paladin PT540 is a special run of multitools manufactured by SOG for Paladin Telecom Tools. It is one of the larger multitools out there, but is fairly rare due to low production numbers. It is based on the (relatively) smaller SOG PowerLock, which is a tool you may consider looking into.
In a similar vein to the PT540, the West Marine BlackTip is another large multitool, again manufactured by SOG in similar circumstances to the PT540. The BlackTip is a little more common than the PT540, and is based on the SOG PowerAssist, but larger.
Both the PowerLock & PowerAssist are roughly the size of the SuperTool 300, so the above mentioned "specialty" tools are actually quite large.
I hope this post was helpful & informative

-
Discontinued now I think, but the Gerber Freehand might be big enough.
-
@hiraethus said:
Discontinued now I think, but the Gerber Freehand might be big enough.
-
@hiraethus said:
Discontinued now I think, but the Gerber Freehand might be big enough.Still available on US eBay from time to time.
-
@mathewheller said:
Hello everyone! My first post here. Im looking for a larger multitool. I've had the Leatherman surge and the supertool 3000 which were really nice but still didn't have enough meat in the pliers for my liking. Weight doesn't really bother me, I just want a larger or thicker multitool than the surge or supertool for carrying at work and I can't find anything. Any help is greatly appreciated!Some possibilities in this thread:
/topic/51541 -
Leatherman MUT is pretty big, although not that different from the Surge, size-wise. Scour Ebay for the Gerber Freehand, Paladin PT540, and SOG BlackTip. Those are the biggies by the major multitool suppliers. The Multitasker AR15 tool (whatever it's called) is biggish, but has really beefy pliers. Expect to pay a premium for these, though.
I would think the Freehand would not be terribly difficult to find, as it was in production for several years, and only discontinued recently.

-
I use pliers so often, and so roughly I had to switch to carrying linesman's pliers. However, I have a list of MT pliers that are near indestructible: I'm a farmhand, and typical use for pliers on me is implement work, fencing ,and I rarely cut any wire that isn't hardened steel.
Gerber MP series with blunt nosed pliers
Kutmaster/Klein/Proto/Armstrong Multimaster, in blunt and needlenose. Their blunt nosed pliers are beefier than most and are the same thickness as the blunt ones.
Schrade ST-1/ST-5E (spent most of its life offered as the Craftsman Professional Multitool). Laminated and beefy on both. The blunt nose, slip-joint pliers on the Craftsman Professional are even tougher. Schrade also offered a line called the Tough Grip, based on Petersen Vise Grip locking pliers
And the Duluth Handiboy and its cheap knockoff, the CTA Tools Farmer's Pliers. These were regular slip-joint pliers, about 6 or 7 inches long, with a big screwdriver on one handle (suitable for prying) and an adjustable wrench on the other handle. They typically for $50 or more because it's been a few decades since they were made. The CTA knockoff, on the other hand, is still being made (in China) and about $10. This is the only tool on the list I have no experience with.
-
Cody makes some great large tool suggestions. I'll add the Vic Autotool. It is a beast in size. There are lots of large antique multi tools, but most of them aren't practical or have limited use. Many really old multi tools do not have knives.
-
The CRKT Bivy is pretty hand filling.
https://www.youtube.com/watch?v=Wo7qULaVOOA -
Need big plairs and don't care about weight? Get a large pliar holster for your belt and stick a 12" pair of channel lock pliars in it. Not big enough still? Stick a pair of channel lock 16.5" pliars, or even yet, the 20.25" channel lock pliars.
MTs have reached the point where pliar size is at the terminal point of being unwieldly for a majority of humans. I don't see pliars getting much bigger, if at all larger, than some of the tools listed.
A MT IS a compromise between size, tool count and weight. A pair of real plairs is the only practical way to have huge pliars in your daily load out.
The ST300(and Surge) pliars are the pinnacle of MT pliars. IMO of course. Anything bigger would be impractical/expensive/heavy and hard to sell to most of us MT users.
The unobtainable recommendations are super expensive and irreplaceable if broken. Not really a good tool to be very hard on. EDIT: Also, some of the recommendations are smaller(even quite a bit smaller ) than what you are trying to upgrade from.
Hope this doesn't ruffle any feathers, but I felt it necessary to bring it up. MTs are not a replacement for a true set of good plairs.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login