First mod done. I present...
-
-
@Pablo O'Brien said:
Thanks.

Nice try Pablo....would have been sweet to get the small blade on there.
Big fan of your recent posts about mod attempts with with all the pics taken along the way. Thinking about attempt my first mod and they're definitely making me feel like I have a better grasp going in.

When it comes to modding, I think taking it apart is the hardest bit, but only if you're trying to save the brushings

I recommend getting beater SAKs online for practice and spare parts "just in case".
And experiment with preening, find what technique works for you.
Be careful with your preening Pabs hun
And your brushing, too...

-
I ended up putting the saw in place of the main blade, and filling the other side with washers.
Spoiler:
The saw washer is 0.4mm, and it needs to be 0.2mm. :-
Ah well, I'll replace it sometime in the future when I get the proper thickness washer.
I've kept the 0.4mm washer as it would be worse NOT to have any washer.Spoiler:
I ended up dropping the brass spacer on the left as it seemed to be too thick. I'll replace it sometime with one half the thickness(0.2mm instead of 0.4mm)
The top Vic spacer is there for comparison, I only used the two on the right.Spoiler:
Like I said, I ended up dropping the brass spacer that you see here in the back.
-
-
Great work Pabs - you're quickly turning into a mad genius! Love these threads. Might have to nick some ideas for a bladeless from you.

I recognise that mag glass!

-
-
-
-
-
-
-
Regarding the corkscrew issue, it may be that the spacer pieces aren't enough to properly tension the backspring. Maybe the tang (only) off a small blade, with one standard spacer piece might yield better results. Aside from that, that's a nice knifeless mod

-
@50ft-trad said:
Regarding the corkscrew issue, it may be that the spacer pieces aren't enough to properly tension the backspring. Maybe the tang (only) off a small blade, with one standard spacer piece might yield better results. Aside from that, that's a nice knifeless mod
Thanks, I'll consider that if I ever get some Dremel bits for SS.

-
Found some new info while trawling through old mod posts.

@Mr. Whippy said:
Master Mechanic is a great fit or Mechanic Plus. I love that knife. Quick question, does the file need to sit alone or could the small blade go opposite of it?
The trick is you need to use the main blade spring. It turns out that the main blade is thicker than the older style file by the width of a standard liner, almost exactly. I used the standard spacer on the small blade side, filing off the tooth at the top and then made a spacer for the file side by sacrificing an old Al liner.
The interesting thing here is that Mr.Whippy used a spacer made from a standard liner.

-
@Pablo O'Brien said:
Found some new info while trawling through old mod posts.
@Mr. Whippy said:
Master Mechanic is a great fit or Mechanic Plus. I love that knife. Quick question, does the file need to sit alone or could the small blade go opposite of it?
The trick is you need to use the main blade spring. It turns out that the main blade is thicker than the older style file by the width of a standard liner, almost exactly. I used the standard spacer on the small blade side, filing off the tooth at the top and then made a spacer for the file side by sacrificing an old Al liner.
The interesting thing here is that Mr.Whippy used a spacer made from a standard liner.

I guess the old vs new file distinction is important too...maybe old file is more narrow?
-
@Pablo O'Brien said:
Found some new info while trawling through old mod posts.

@Mr. Whippy said:
Master Mechanic is a great fit or Mechanic Plus. I love that knife. Quick question, does the file need to sit alone or could the small blade go opposite of it?
The trick is you need to use the main blade spring. It turns out that the main blade is thicker than the older style file by the width of a standard liner, almost exactly. I used the standard spacer on the small blade side, filing off the tooth at the top and then made a spacer for the file side by sacrificing an old Al liner.
The interesting thing here is that Mr.Whippy used a spacer made from a standard liner.

I guess the old vs new file distinction is important too...maybe old file is more narrow?
Maybe, though I don't think so. Anyone know for sure?
-
-
@Don Pablo said:
I’ve just noticed that photobarket just put the pics back!

everywhere
/post/1659171
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

