What did you use your Sak on today?
-
I repacked some 3D printed 91mm SAK scales and shipped them out to group buy mates. SAK scissors really came in handy. I initially used my Golfer but scissors are loose and need sharpening. So I took out my Super Tinker instead.

-
@gene stoner said:
http://rockymountainbushcraft.blogspot.com/2015/03/mountain-bushcraft-can-swiss-champs.htmlI've done it using punk wood like this.
Thanks! I've heard that it's been debated, but I had a hard time believing that it would not work.
Sent from my iPhone using Tapatalk
-
<u></u>
I've done it using punk wood like this.
Thanks! I've heard that it's been debated, but I had a hard time believing that it would not work.
Sent from my iPhone using Tapatalk
Nice there's plenty of that around my area. This has been fun getting to experiment with everyone
:) -
Refrigerator door handle came off this morning. Had to put it on quickly and rush to work. The driver on the tip of the can opener worked fine for the torx bit which was smaller than #30 but bigger than #20.

Sent from my iPhone using Tapatalk
-
It was yesterday and not today, but you see my goodwill -

-
Used the hook to pull out the old water filter in my fridge.


Sent from my iPhone using Tapatalk
-
@Tired_Yeti said:
Used the hook to pull out the old water filter in my fridge.

Sent from my iPhone using Tapatalk

-
Opening Corn as per the SwissChamp product photo


Not really though, I love the Sharpened edge of the SAK can opener. So smooth opening

-
@KandiKlover said:
Opening Corn as per the SwissChamp product photo

Not really though, I love the Sharpened edge of the SAK can opener. So smooth opening



-
@KandiKlover said:
Opening Corn as per the SwissChamp product photo

Not really though, I love the Sharpened edge of the SAK can opener. So smooth opening

When I see Libby I can only think of Libby the Kid . . .
from yesteryear
https://m.youtube.com/watch?v=IqqhJql-2Pgor the anoying Libby jingle (not the one I remember)
https://m.youtube.com/watch?v=_fivBoHfgEs -
Last couple of days I used SAKs for all kinds of stuff. We moved to our new home and every time I needed a tool to dismantle furniture my toolbox was at our new place and when I needed to build up furniture the toolbox was at our old place

Luckily I had SAKs at both places

So those got a lot of use. Sometimes I needed to be creative. At one point I even used a wood saw for unscrewing the bed :D
Let me explain that one :D
When I turned the bolt the nut on the other side also turned, so I needed something to hold the nut still while I unscrewed the bolt. The wood saw worked perfectly for that ;) -
@KandiKlover said:
Opening Corn as per the SwissChamp product photo

Not really though, I love the Sharpened edge of the SAK can opener. So smooth opening


I love using the Vic can opener.
-
@glenfiddich1983 said:
Last couple of days I used SAKs for all kinds of stuff. We moved to our new home and every time I needed a tool to dismantle furniture my toolbox was at our new place and when I needed to build up furniture the toolbox was at our old place
Luckily I had SAKs at both places

So those got a lot of use. Sometimes I needed to be creative. At one point I even used a wood saw for unscrewing the bed :D
Let me explain that one :D
When I turned the bolt the nut on the other side also turned, so I needed something to hold the nut still while I unscrewed the bolt. The wood saw worked perfectly for that ;)Congratulations on the new home!
It's a good thing you had your SAKS.

-
@glenfiddich1983 said:
...Sometimes I needed to be creative. At one point I even used a wood saw for unscrewing the bed...MacGyver would be proud.
Sent from my iPhone using Tapatalk
-
I successfully fire started today. So the commonly available cruchy dark leaf found all over everywhere worked fine. I got a nice really dry on and after only a few seconds the burn hole kept expanding on its own so I took off the magnifier while blowing air on it and set it on the cotton and it took nicely. The sun wasn't even high noon and was already a few hours off and it was windy but still worked. Quick and minimal effort.
-
@KandiKlover said:
I successfully fire started today. So the commonly available cruchy dark leaf found all over everywhere worked fine. I got a nice really dry on and after only a few seconds the burn hole kept expanding on its own so I took off the magnifier while blowing air on it and set it on the cotton and it took nicely. The sun wasn't even high noon and was already a few hours off and it was windy but still worked. Quick and minimal effort.Found your childhood photo. 'member this?

Sent from my iPhone using Tapatalk
-
:D
I successfully fire started today. So the commonly available cruchy dark leaf found all over everywhere worked fine. I got a nice really dry on and after only a few seconds the burn hole kept expanding on its own so I took off the magnifier while blowing air on it and set it on the cotton and it took nicely. The sun wasn't even high noon and was already a few hours off and it was windy but still worked. Quick and minimal effort.
Found your childhood photo. 'member this?

Sent from my iPhone using Tapatalk
Ahh my first Fresnel Lens hehe good memories

-
@KandiKlover said:
I successfully fire started today. So the commonly available cruchy dark leaf found all over everywhere worked fine. I got a nice really dry on and after only a few seconds the burn hole kept expanding on its own so I took off the magnifier while blowing air on it and set it on the cotton and it took nicely. The sun wasn't even high noon and was already a few hours off and it was windy but still worked. Quick and minimal effort.Nice use of the magnifier!

-
@KandiKlover said:
I successfully fire started today. So the commonly available cruchy dark leaf found all over everywhere worked fine. I got a nice really dry on and after only a few seconds the burn hole kept expanding on its own so I took off the magnifier while blowing air on it and set it on the cotton and it took nicely. The sun wasn't even high noon and was already a few hours off and it was windy but still worked. Quick and minimal effort.BTW, I forgot to thank you. I had inquired about this in another thread. This is exactly the testing report I was looking for regarding the magnifier.
Now, I'd just like to hear about some effective uses of the fish scaler from someone. After taking care of some of those boring, grown up responsibilities, I'll be picking up a Swiss Champ myself.
I wonder if I'll miss carrying my Craftsman?
-
Tourist today


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login