Swisschamp owners club
-
All this talk of Swiss Champs had me curious as to how many I have collected so I decided to do some SAK reorganizing to group like SAKs. It turns out that I have 11, one of which is a SuperTimer. I don't have a decent photo handy but am attaching a thumbnail picture.

-
@NorCalJim said:
All this talk of Swiss Champs had me curious as to how many I have collected so I decided to do some SAK reorganizing to group like SAKs. It turns out that I have 11, one of which is a SuperTimer. I don't have a decent photo handy but am attaching a thumbnail picture.Nice. I wonder if you can find the electronic 91mm scales like the XAVT has and buy them. That would be fun to put on the SwissChamp :D
-
All this talk of Swiss Champs had me curious as to how many I have collected so I decided to do some SAK reorganizing to group like SAKs. It turns out that I have 11, one of which is a SuperTimer. I don't have a decent photo handy but am attaching a thumbnail picture.
Nice. I wonder if you can find the electronic 91mm scales like the XAVT has and buy them. That would be fun to put on the SwissChamp :D
It would be great if that was the case! There are other SAKs like the Traveller Lite, Voyager Lite & Altimeter Plus that have the electronic scales but I don't see any mechanism for replacement other than the Victorinox lifetime warranty. The Timer and SuperTimer are other examples of major scale functionality and I don't think that there are replacement scales available (otherwise, collectors could make their own Timers and SuperTimers): https://smartknives.com/Victorinox-Standard-Knives/SuperTimer.htm
-
> @NorCalJim [said](/post/1556798): > > @KandiKlover [said](/post/1556683): > > > @NorCalJim [said](/post/1556677): > > > All this talk of Swiss Champs had me curious as to how many I have collected so I decided to do some SAK reorganizing to group like SAKs. It turns out that I have 11, one of which is a SuperTimer. I don't have a decent photo handy but am attaching a thumbnail picture. > > > > > > > > Nice. I wonder if you can find the electronic 91mm scales like the XAVT has and buy them. That would be fun to put on the SwissChamp :D > > > > It would be great if that was the case! There are other SAKs like the Traveller Lite, Voyager Lite & Altimeter Plus that have the electronic scales but I don't see any mechanism for replacement other than the Victorinox lifetime warranty. The Timer and SuperTimer are other examples of major scale functionality and I don't think that there are replacement scales available (otherwise, collectors could make their own Timers and SuperTimers): <https://smartknives.com/Victorinox-Standard-Knives/SuperTimer.htm> Ah that's right my bad. I forgot it was to integrated into the knife itself. I remember now because I was thinking before if you could just put regular solid red plus scales on the XAVT too look like a regular champ. Would love to see a regular full rez of your super timer some time. That's pretty cool, love analog watches. -
Just checking in here.
The scales have changed, but this is my same beloved SC gifted to me by my wife a few years ago (even has my initials on the blade!) :D


-
Thanks, and that's my Pioneer X next to it.
I've been drooling over the prospect of an XLT... It has every single implement I desire on it, and just a few layers more than the classic SC.
Are those of you who own an XLT happy with it?
-
Swisschamp roadying for Brontosaurus Rex

-
Camo today...
Swiss Champ Camo by Jim Person, on Flickr -
CAMO scales!! Awlsome!!!! :D

-
@sawman said:
Thanks, and that's my Pioneer X next to it.I've been drooling over the prospect of an XLT... It has every single implement I desire on it, and just a few layers more than the classic SC.
Are those of you who own an XLT happy with it?
I too would absolutely love an XLT. Pruner blade, electric wire scraper blade, cockroach flicking spatula/drink mixer. I would use them a lot. I do wish it had regular solid red scales though but that's just an aesthetic thing and can always be swapped out. Oh and the bit driver too, with some of the odd little electronics and radios i tinker with that's always useful.
-
Mags, the crew looks good!! Nice turnout!!

-
Cheers Baz - the rest of the crew were hovering over by the escape pod because usually at some point during the rehearsal some bolts blow under the pressure of the heaviness of the toonz. Didn't happen this time so they just looked like a bunch of cowardly pigeons.
-
Yesterday, I used my SC to fix a stubborn spare bedroom door which just didn't want to catch.
I am super impressed with the strength of its pliers, which I used to bend the catch plate parts into better position. I have used them many times before but never exerted this amount of force.
One of the screws was a bugger and required a good deal of umph to turn. No problem for this Phillips- which did not waver, twist or strip in any way

The chisel has quickly become one of my most valued tools. Upon completion of the door project, a brief trip over the fine DMT brought it to razor sharpness.
-
Nice job! That chisel can be scary sharp!!q
-
@sawman said:
Yesterday, I used my SC to fix a stubborn spare bedroom door which just didn't want to catch.I am super impressed with the strength of its pliers, which I used to bend the catch plate parts into better position. I have used them many times before but never exerted this amount of force.
One of the screws was a bugger and required a good deal of umph to turn. No problem for this Phillips- which did not waver, twist or strip in any way

The chisel has quickly become one of my most valued tools. Upon completion of the door project, a brief trip over the fine DMT brought it to razor sharpness.
:ahhh :ahhh :ahhh :ahhh
-
@sawman said:
Yesterday, I used my SC to fix a stubborn spare bedroom door which just didn't want to catch.I am super impressed with the strength of its pliers, which I used to bend the catch plate parts into better position. I have used them many times before but never exerted this amount of force.
One of the screws was a bugger and required a good deal of umph to turn. No problem for this Phillips- which did not waver, twist or strip in any way

The chisel has quickly become one of my most valued tools. Upon completion of the door project, a brief trip over the fine DMT brought it to razor sharpness.
It was amazing that they were able to put pliers in compactly on a nice pocket knife, even more amazing how strong it is. I have seen pics here of people bending some metal sheets before.
I was messing around last night and found the chisel also pops a chestnut open pretty quick as well.
-
My Champ club entry. My goto desk drawer tool for minor tasks. Don't use all of the tools, but when I need them, they are there.





-
@gerleatherberman said:
My Champ club entry. My goto desk drawer tool for minor tasks. Don't use all of the tools, but when I need them, they are there.
Mmh love a good XLT

-
My Champ club entry. My goto desk drawer tool for minor tasks. Don't use all of the tools, but when I need them, they are there.

Mmh love a good XLT


I actually replaced a toolkit in my bedroom desk with the champ xlt. Takes up 1/8th the space as the toolkit. :) Works great on a lot of stuff!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
