Woodsmans Owners Club
-
What a beauty Twiliter!! Mine takes me out in the woods, too, if only in my mind at times.
-
Take the Woodsman next time buddy!! Now I've that song in my head....
:ahhh -
@Pablo O'Brien said:
My bladeless version is still being EDC'd. :)Since the only back tool on it at the moment is a corkscrew, I'm planning on adding the hook to the scissors which are at the opposite side of the SAK, as compared to the corkscrew layer. It should balance the aesthetics of the backside nicely.

A chisel might be useful too while you have it apart Pabs. Just a thought.

-
I just took a photo of my Woodsman without the scales as a look at the "Before" condition. The photo actually makes the Woodsman look better than it is. On closer inspection, the small knife has a small chip (now I know how I was able to get this for only $29). I missed the awl when I was checking the tools for snap and needed to use a tool to pry it from its retracted position and pliers to move it to a fully retracted position.
Discovering the chip in the small blade was disappointing and has changed this from a restoration project to more of a spruce-up. I will still give the Woodsman the spa treatment and progressive grit sanding plus Dremel buffing but excellent is now off the table (can't be excellent with a chip in the blade).
Woodsman Reburb 1 by NorCal Jim, on Flickr -
Still the basic platform is there to work with. Old gray mag frame can't be beat. I think the only thing missing to make a Woodsman near perfect is the chisel.
-
@Barry Rowland said:
Still the basic platform is there to work with. Old gray mag frame can't be beat. I think the only thing missing to make a Woodsman near perfect is the chisel.I agree with you on the grey mag Baz - I have an old Explorer that I'm going to nick parts for to 'upgrade' my modern Swisschamp. I'm replacing the thinner tang blade with the thicker tang, the mag and philips and will be adding a couple of extras to make it a Swiss SuperChamp. Watch this space..........
-
I can hardly wait Mags!! -
Thanks Baz
I saw your kind offer for the canoes in another thread - Can't remember which, but take a pic of Medical Bill for scale if that's still ok? :D -
Absolutely Mags.... can't have the crew stranded canoe-less.
-
@Pablo O'Brien said:
My bladeless version is still being EDC'd. :)
Since the only back tool on it at the moment is a corkscrew, I'm planning on adding the hook to the scissors which are at the opposite side of the SAK, as compared to the corkscrew layer. It should balance the aesthetics of the backside nicely.

A chisel might be useful too while you have it apart Pabs. Just a thought.

No place to put the chisel, the way I I've done it now.

Symmetry achieved! 8)The only thing is... Is it still a bladeless woodsman derivative, what with everything I've taken off (blades and openers)?

Or something else entirely? -
@Pablo O'Brien said:
@Pablo O'Brien said:
My bladeless version is still being EDC'd. :)
Since the only back tool on it at the moment is a corkscrew, I'm planning on adding the hook to the scissors which are at the opposite side of the SAK, as compared to the corkscrew layer. It should balance the aesthetics of the backside nicely.

A chisel might be useful too while you have it apart Pabs. Just a thought.

No place to put the chisel, the way I I've done it now.

Symmetry achieved! 8)The only thing is... Is it still a bladeless woodsman derivative, what with everything I've taken off (blades and openers)?

Or something else entirely?Dunno if it's even a SAK anymore, no K. :ahhh
-
@Pablo O'Brien said:
@Pablo O'Brien said:
My bladeless version is still being EDC'd. :)
Since the only back tool on it at the moment is a corkscrew, I'm planning on adding the hook to the scissors which are at the opposite side of the SAK, as compared to the corkscrew layer. It should balance the aesthetics of the backside nicely.

A chisel might be useful too while you have it apart Pabs. Just a thought.

No place to put the chisel, the way I I've done it now.

Symmetry achieved! 8)The only thing is... Is it still a bladeless woodsman derivative, what with everything I've taken off (blades and openers)?

Or something else entirely?Dunno if it's even a SAK anymore, no K. :ahhh
Swiss Army Knifeless.

There's your K. :D -
@Pablo O'Brien said:
@Pablo O'Brien said:
My bladeless version is still being EDC'd. :)
Since the only back tool on it at the moment is a corkscrew, I'm planning on adding the hook to the scissors which are at the opposite side of the SAK, as compared to the corkscrew layer. It should balance the aesthetics of the backside nicely.

A chisel might be useful too while you have it apart Pabs. Just a thought.

No place to put the chisel, the way I I've done it now.

Symmetry achieved! 8)The only thing is... Is it still a bladeless woodsman derivative, what with everything I've taken off (blades and openers)?

Or something else entirely?Definitely a Pabsman Pabs hun.
-
@Pablo O'Brien said:
@Pablo O'Brien said:
My bladeless version is still being EDC'd. :)
Since the only back tool on it at the moment is a corkscrew, I'm planning on adding the hook to the scissors which are at the opposite side of the SAK, as compared to the corkscrew layer. It should balance the aesthetics of the backside nicely.

A chisel might be useful too while you have it apart Pabs. Just a thought.

No place to put the chisel, the way I I've done it now.

Symmetry achieved! 8)The only thing is... Is it still a bladeless woodsman derivative, what with everything I've taken off (blades and openers)?

Or something else entirely?Definitely a Pabsman Pabs hun.
I know Mags, we talked about this, the Mini Pabsman.

But does it belong to the Woodsman family?
Or would it be, say, a Yeoman derivative, for example? -
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=Pablo O'Brien link=topic=59897.msg1538566#msg1538566 date=1502880804]
My bladeless version is still being EDC'd. :)Since the only back tool on it at the moment is a corkscrew, I'm planning on adding the hook to the scissors which are at the opposite side of the SAK, as compared to the corkscrew layer. It should balance the aesthetics of the backside nicely.

A chisel might be useful too while you have it apart Pabs. Just a thought.

No place to put the chisel, the way I I've done it now.

Symmetry achieved! 8)The only thing is... Is it still a bladeless woodsman derivative, what with everything I've taken off (blades and openers)?

Or something else entirely?Dunno if it's even a SAK anymore, no K. :ahhh
Swiss Army Knifeless.

There's your K. :D
[/quote]Phew, that was a close one. In other words, O, K! :D
-
Woodsman spa treatment complete (covered tool with dishwashing liquid detergent, soaked in hot water for two hours, scrubbed internals with toothbrush followed by pipe cleaners and Q-tips. I used Victorinox oil to lubricate and worked each tool. All tools are functioning properly deploying with ease and snapping back when retracted, including the stubborn awl. My iphone didn't pick up the detail of either before (looked better than reality) or after (didn't capture the improvement). I am pleased with the improvement and decided to settle for ease of function instead of trying for a Concours de Elegance look.
Here is the Woodsman after the spa treatment...
Woodsman Refurb 2 by NorCal Jim, on FlickrThe main blade has some tiny scratches that I can fix with some light sanding and buffing but it looks good enough for daily use now. In light of the tiny chip on the small blade, I decided not to treat this as a restoration and installed Sapphire scales instead of traditional red scales. I will be searching for a pristine Woodsman and put this with other "Daily drivers".
Woodsman Reburb 3 by NorCal Jim, on Flickr -
Really nice!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login