Axe Handles
-
:D -
Only the second
Wait a minute you have removed something from the table since this morning
Mmm now what was there this morning
something orange

I had to make room so they'd fit on the bench easier!
I think the orange thing was a mint tinI thought you were testing me
They have tests like that here before they put you in an old peoples home
(Then they take away your axes :ahhh ):D

If you don't know you're being tested, it's probably all over!
-
Comparison between two Hickory handles (I picked up a different hickory handle at the weekend) and one Spotted Gum handle
Not very obvious, but the Hickory handles are both thicker in this dimension.
In the other dimension, things are a lot clearer:
At the thinnest point, the Spotted Gum handle is 22mm, the middle handle it 24, and the other Hickory is 26mm. Things get thicker from there but a lot more for the Hickory options. The middle handle has a much nicer palm swell than the other one, about equivalent to the gum handle.
-
What are the benefits of gum handles?
-
They are a popular tool handle choice in Australia. The wood is quite dense and sturdy, so possibly a little tougher than Hickory, I don't know.
Biggest benefit is the cost - 2/3 to 1/2 the price of the Hickory handles. Other than a bit of sanding, the gum handle is as manufactured for thickness, which I quite like. A fair bit would need trimming off the hickory to bring it down to the same dimensions, so less work to get it from the log thickness to handle thickness desired by myself, but that's just down to preference. Easier to provide a fat handle and let the buyer take material off if desired, than go too thin. -
What are the benefits of gum handles?
They are a popular tool handle choice in Australia. The wood is quite dense and sturdy, so possibly a little tougher than Hickory, I don't know.
Biggest benefit is the cost - 2/3 to 1/2 the price of the Hickory handles. Other than a bit of sanding, the gum handle is as manufactured for thickness, which I quite like. A fair bit would need trimming off the hickory to bring it down to the same dimensions, so less work to get it from the log thickness to handle thickness desired by myself, but that's just down to preference. Easier to provide a fat handle and let the buyer take material off if desired, than go too thin.although many customers cringe when someone does thin out the handle
-
What are the benefits of gum handles?
They are a popular tool handle choice in Australia. The wood is quite dense and sturdy, so possibly a little tougher than Hickory, I don't know.
Biggest benefit is the cost - 2/3 to 1/2 the price of the Hickory handles. Other than a bit of sanding, the gum handle is as manufactured for thickness, which I quite like. A fair bit would need trimming off the hickory to bring it down to the same dimensions, so less work to get it from the log thickness to handle thickness desired by myself, but that's just down to preference. Easier to provide a fat handle and let the buyer take material off if desired, than go too thin.although many customers cringe when someone does thin out the handle
Why so? The axe needs to be comfortable for the user to use. An axe that isn't used will never break
-
What are the benefits of gum handles?
They are a popular tool handle choice in Australia. The wood is quite dense and sturdy, so possibly a little tougher than Hickory, I don't know.
Biggest benefit is the cost - 2/3 to 1/2 the price of the Hickory handles. Other than a bit of sanding, the gum handle is as manufactured for thickness, which I quite like. A fair bit would need trimming off the hickory to bring it down to the same dimensions, so less work to get it from the log thickness to handle thickness desired by myself, but that's just down to preference. Easier to provide a fat handle and let the buyer take material off if desired, than go too thin.although many customers cringe when someone does thin out the handle
Why so? The axe needs to be comfortable for the user to use. An axe that isn't used will never break
Probably because they think that a thick handle is superior in terms of toughness and durability. But it does go to the point if or how much use will that axe see. For instance, I should not be the one to complain about thickness when any axe I get won't see that much use unless something drastically changes in my life (job that requires more time spent in rural areas, moving out of the city, etc.)
-
[quote author=styx link=topic=73973.msg1558985#msg1558985 date=1506323588]
What are the benefits of gum handles?They are a popular tool handle choice in Australia. The wood is quite dense and sturdy, so possibly a little tougher than Hickory, I don't know.
Biggest benefit is the cost - 2/3 to 1/2 the price of the Hickory handles. Other than a bit of sanding, the gum handle is as manufactured for thickness, which I quite like. A fair bit would need trimming off the hickory to bring it down to the same dimensions, so less work to get it from the log thickness to handle thickness desired by myself, but that's just down to preference. Easier to provide a fat handle and let the buyer take material off if desired, than go too thin.although many customers cringe when someone does thin out the handle
Why so? The axe needs to be comfortable for the user to use. An axe that isn't used will never break
Probably because they think that a thick handle is superior in terms of toughness and durability. But it does go to the point if or how much use will that axe see. For instance, I should not be the one to complain about thickness when any axe I get won't see that much use unless something drastically changes in my life (job that requires more time spent in rural areas, moving out of the city, etc.)
[/quote]I'm no expert. When I used my old Hytest to split wood whilst living in a house with a wood heater, I know I over struck many times. Whether the old handle was more sturdy than modern handles I don't know. I know I didn't break the handle off, but did take some chunks out of it, and it held together ok. I can't say I have had any real experience using an axe with a hickory handle. I don't know how they stand up to over strike. Sure, a thinner handle should be more susceptible to breaking than a thicker one, and a handle manufacturer can possibly get away with a wider range of quality without getting inexperienced users breaking handles and having to replace them under warranty as often, which increases profit, maybe. Seems to me, that a thicker, less springy handle is more likely to transfer shock back to the user. As I was growing up as a kid on the farm, my Dad's block splitter had a probably 1 - 1.5 inch steel pipe handle welded to it. I can't remember using it much, I probably just selected wood from the pile that was already split small enough. But over strike on that thing :o

-
[quote author=TazzieRob link=topic=73973.msg1558988#msg1558988 date=1506324418]
[quote author=styx link=topic=73973.msg1558985#msg1558985 date=1506323588]
What are the benefits of gum handles?They are a popular tool handle choice in Australia. The wood is quite dense and sturdy, so possibly a little tougher than Hickory, I don't know.
Biggest benefit is the cost - 2/3 to 1/2 the price of the Hickory handles. Other than a bit of sanding, the gum handle is as manufactured for thickness, which I quite like. A fair bit would need trimming off the hickory to bring it down to the same dimensions, so less work to get it from the log thickness to handle thickness desired by myself, but that's just down to preference. Easier to provide a fat handle and let the buyer take material off if desired, than go too thin.although many customers cringe when someone does thin out the handle
Why so? The axe needs to be comfortable for the user to use. An axe that isn't used will never break
Probably because they think that a thick handle is superior in terms of toughness and durability. But it does go to the point if or how much use will that axe see. For instance, I should not be the one to complain about thickness when any axe I get won't see that much use unless something drastically changes in my life (job that requires more time spent in rural areas, moving out of the city, etc.)
[/quote]I'm no expert. When I used my old Hytest to split wood whilst living in a house with a wood heater, I know I over struck many times. Whether the old handle was more sturdy than modern handles I don't know. I know I didn't break the handle off, but did take some chunks out of it, and it held together ok. I can't say I have had any real experience using an axe with a hickory handle. I don't know how they stand up to over strike. Sure, a thinner handle should be more susceptible to breaking than a thicker one, and a handle manufacturer can possibly get away with a wider range of quality without getting inexperienced users breaking handles and having to replace them under warranty as often, which increases profit, maybe. Seems to me, that a thicker, less springy handle is more likely to transfer shock back to the user. As I was growing up as a kid on the farm, my Dad's block splitter had a probably 1 - 1.5 inch steel pipe handle welded to it. I can't remember using it much, I probably just selected wood from the pile that was already split small enough. But over strike on that thing :o

[/quote]That's my line of thought too. Although since I'm eyeballing a Fiskars, maybe I shouldn't concern myself with such things
-
@styx said:
Although since I'm eyeballing a Fiskars, maybe I shouldn't concern myself with such thingsI was happier with both my Fiskars splitting axes compared to the conventional splitting maul (block buster) I was using previously. I started out with the larger X27 (I'm a big bloke with a fairly powerful swing), but found the slightly smaller X25 was easier to swing, more accurate and capable of splitting 90% of what I wanted to deal with. Of course now I use my kinetic log splitter and it is more effective than any of these axes/mauls ;)
-
well your back is also a big factor
-
It looks like Fiskars has discontinued it's chopping axes above the X10 (now only X5, 7, and 10) all the longer axes are splitting axes from the X11, 21, 25 and 27
-
well your back is also a big factor
True. Being able to move without pain the next day does help :D
No point busting up your body to stay warm.
This video is interesting from Fiskars for sizing. Py attention though to the slow motion of the axe in operation for splitting right in the first few seconds, and see the handle flex
-
@TazzieRob said:
It looks like Fiskars has discontinued it's chopping axes above the X10 (now only X5, 7, and 10) all the longer axes are splitting axes from the X11, 21, 25 and 27Scratch that, the X10 has been discontinued, and there's an X17 splitting axe
-
Well it doesn't seem too stiff. With my needs the X7 will be perfectly fine so I can throw that handle length out the window for now
-
Well it doesn't seem too stiff. With my needs the X7 will be perfectly fine so I can throw that handle length out the window for now
Makes me wonder if they thin out the handles for the lighter axes or just shorten them
The whole focus of the Fiskars Axe vids appears to be on Splitting
-
Seems so. Not sure why though
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login