Firefly Ferro rod.
-
@GoatDragon said:
Was looking over that kickstarter page. Wtf is up with this gif?

Anyone who has ever used a ferro rod will tell you it doesn't ignite material anywhere close to that quickly.
Unless it's computer graphics, it looks like the tinder has been doused with with a highly flammable accelerant. Maybe Coleman fuel or gasoline? As a teenager, I've lit trash fires in our burn barrel with gasoline and they flashed like that--although a bit bigger and scarier. LOL!
Sent from my iPhone using Tapatalk
-
It's very thin and it probably wouldn't take much to snap it in half. I question the durability of a fire steel the size of a SAK toothpick.
That's a good point, this super thin ferro rod would break very easily. I will be holding on to my money until I can see some real reviewers get their hands on these and put them to the test.
I'm with these guys.

I'm not currently doing anything in my life that necessitates me carrying a firesteel of any kind, but if I was, I would want something more substantial than this. Better than nothing? OK, fair enough, but there comes a point where something becomes too compromised. This is like carrying one plaster/bandaid as a First Aid Kit. That;s still better than nothing, but I am sure most people here would decide that if they wanted a FAK, they would want more than that one item. If I decided I wanted to have a firesteel on me, I would want more than this ;)
-
If think the problem these days is some folk are using a Ferro rod all the time even though it's a emergency item to use once you have no more means of starting a fire, this thin Ferro rod possibly will be crap but if it's all you had then even crap might start a fire,who knows as we havnt tried it,like I said I've bigger better Ferro rods in my kit to use once my lighter and matches are gone, I would rather have this tiny rod as back up instead of the toothpick as in the wilds it's easy to make a toothpick but not a Ferro rod, but hey we are just going around in circles
it's a shame he couldn't send out a few test models :D -
I bought this old Browning knife some time ago just because it had a built in ferro rod. Kind of a Huntsman with a ferro rod instead of a corkscrew. Same diameter as the Exotac Nanostriker (3/16" I believe), so replacement rods are available. It's a press fit so that it can be removed and used. The knife was made in Germany.


-
@Boonies said:
I bought this old Browning knife some time ago just because it had a built in ferro rod. Kind of a Huntsman with a ferro rod instead of a corkscrew. Same diameter as the Exotac Nanostriker (3/16" I believe), so replacement rods are available. It's a press fit so that it can be removed and used. The knife was made in Germany.
that's cool and a better diameter rod :D always better I've been told 
-
I bought this old Browning knife some time ago just because it had a built in ferro rod. Kind of a Huntsman with a ferro rod instead of a corkscrew. Same diameter as the Exotac Nanostriker (3/16" I believe), so replacement rods are available. It's a press fit so that it can be removed and used. The knife was made in Germany.

that's cool and a better diameter rod :D always better I've been told 
It's a bit short though.......

-
I bought this old Browning knife some time ago just because it had a built in ferro rod. Kind of a Huntsman with a ferro rod instead of a corkscrew. Same diameter as the Exotac Nanostriker (3/16" I believe), so replacement rods are available. It's a press fit so that it can be removed and used. The knife was made in Germany.

that's cool and a better diameter rod :D always better I've been told 
It's a bit short though.......

That's what she said

-
PfrZed....😜
-
This is a very cool little ferro rod!
I've been thinking about making one myself, but at $14,- for three I might reconsider and order a set.
I like the fluorecent head and glow in the dark is always a plus.Imagine this on stayglow scales...

-
Just registering interest for any potential UK group buy!
-
I'd like to hold back, see it reviewed, and make up my mind, but it's a kickstarter thing. Will we be able to buy it later, or is this it?

Still, I'm in for an Australian group buy.

-
UK Group buy is still on? I'll be in London and Swindon end of October.
Worst case scenario I can ask someone for reposting it (at least from UK it skips customs - for now).
-
I signed up for the kickstarter. Seems like an excellent back-up option to have available in my SAK. I will have enough to thoroughly test the product and give some away to people I've already given SAKs to...
Interesting claims about the material they're using. I have a bunch of very slim firesteels I obtained from firesteel.com that are approximately the same thickness as the Firefly and those work nicely; if they do have an improved material then so much the better.
-
@Boonies said:
I bought this old Browning knife some time ago just because it had a built in ferro rod. Kind of a Huntsman with a ferro rod instead of a corkscrew. Same diameter as the Exotac Nanostriker (3/16" I believe), so replacement rods are available. It's a press fit so that it can be removed and used. The knife was made in Germany.
I like that idea. I'd like to see Victorinox replace the corkscrew on some models with this.
I'd love to see a mod for this. I've never modified a SAK myself so I think it'll be a long wait if the world waits for me to come up with one. That said, this has really sparked my interest.
Sent from my iPhone using Tapatalk
-
I bought this old Browning knife some time ago just because it had a built in ferro rod. Kind of a Huntsman with a ferro rod instead of a corkscrew. Same diameter as the Exotac Nanostriker (3/16" I believe), so replacement rods are available. It's a press fit so that it can be removed and used. The knife was made in Germany.

I like that idea. I'd like to see Victorinox replace the corkscrew on some models with this.
I'd love to see a mod for this. I've never modified a SAK myself so I think it'll be a long wait if the world waits for me to come up with one. That said, this has really sparked my interest.
Sent from my iPhone using Tapatalk
It's been done before by someone on here I think.

-
@Pablo O'Brien said:
I bought this old Browning knife some time ago just because it had a built in ferro rod. Kind of a Huntsman with a ferro rod instead of a corkscrew. Same diameter as the Exotac Nanostriker (3/16" I believe), so replacement rods are available. It's a press fit so that it can be removed and used. The knife was made in Germany.

I like that idea. I'd like to see Victorinox replace the corkscrew on some models with this.
I'd love to see a mod for this. I've never modified a SAK myself so I think it'll be a long wait if the world waits for me to come up with one. That said, this has really sparked my interest.
Sent from my iPhone using Tapatalk
It's been done before by someone on here I think.

Found it! Spork60's "Hotspark Tinker". I think that this is V1, and he got up to V2 or V3?
http://www.swissarmyknights.com/articles/2005/111-hotspark-tinker -
@Pablo O'Brien said:
@Pablo O'Brien said:
I bought this old Browning knife some time ago just because it had a built in ferro rod. Kind of a Huntsman with a ferro rod instead of a corkscrew. Same diameter as the Exotac Nanostriker (3/16" I believe), so replacement rods are available. It's a press fit so that it can be removed and used. The knife was made in Germany.

I like that idea. I'd like to see Victorinox replace the corkscrew on some models with this.
I'd love to see a mod for this. I've never modified a SAK myself so I think it'll be a long wait if the world waits for me to come up with one. That said, this has really sparked my interest.
Sent from my iPhone using Tapatalk
It's been done before by someone on here I think.

Found it! Spork60's "Hotspark Tinker". I think that this is V1, and he got up to V2 or V3?
http://www.swissarmyknights.com/articles/2005/111-hotspark-tinkerThis idea is cool



-
Fire is the most important survival skill you could have. The more options and skill you have the better your chances. I already have ferrous rod toggles on my SAK's for emergency's and I do practice with them. They are the worst and most awkward fire steels I've ever used. But they work and I never notice them on my SAK so they're not in the way.
I well definitely be trying some of these out. Imagine a Rambler that starts fires. It would have great potential for mini PSK.
-
I backed the Kickstarter project. It looks like it is only 30% funded at this point, so it's not clear that it will actually come to fruition. If everybody waits to see how it turns out first......
Cool idea though. I'd love to have one of these for my Hiker and Huntsman -- my most commonly used SAKs for hiking/camping/fishing.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login