Surge EDC Practicality
-
these two are some of the sturdiest, strongest and most solid feeling MTs I have had in my hands, and I've trusted both for the jobs that made all other MTs fear for their integrity.

The Surge is heavy but I think that's the minimum you could ask for the versatility and strength it gives you, and I wouldn't hesitate to recommend it to anyone who needs tools at hand in their job or life.

I find it easier to carry horizontally, in a LM Nylon sheath carried at 10 or 2 on the belt, it disappears there after some carry time and you'll be glad to have it on you when needed.

-
...And handy-men worldwide now a-bed
Shall think themselves accurs'd they "have not"...
And hold their multi-tools cheap whiles any speaks
That holds with us a Leatherman Surge! -
That bit of paraphrasing has got to be worth a "Pull-it Surprise" at least, right?
-
::)

-
The Surge isn't that big.

Sent from my SM-N950U using Tapatalk
-
Before I lost my Surge i carried it everyday, a great piece of kit I belt carried mine so weight wasnt really an issue. I love the scissors on the Surge and in my opinion the best scissors in the LM lineup. You wont regret it.
I be buying one again very soon in Black Oxide though
-
@AndyTiedye said:
The Surge isn't that big.
Sent from my SM-N950U using Tapatalk
Yeahhhh..about that...look at the newer pliar head on the new Surge. I have a SOG PowerAssist. Problem with SOG=. Pliars don't open far enough to be really useful for heavy duty work(2x the power makes no difference when handles are 8" splayed on my sog. Haha). I call my PowerAssist the world's biggest tool for medium duty work. Poor file, poor drivers, etc. It isn't about being big, it is about being useful I think.
SurgeHey Yontz,
The surge is big, but not the biggest. It IS probably the most versatile MT being built right now.
Once the weight is adjusted to, you won't regret it. I am in week two of my Surge challenge and can't seem to find anyway to damage it yet, short of deliberate abuse, which I won't do.
The weight took about four days to acclomate to. I carry it in the premium leather sheath with two accessory sleeves. I saved weight by removing my edc blade and swapping a 2xAA maglite for an LED solitaire. Ended up being the same weight as my normal wave/edc knife/and 2xAAA led maglite combo.Pictured: surge in sheath w solitaire and a photo of the sog vs. Surge handle splay for the same pliar widths.


-
Practicality is subjective. Many people with think the tool is "too much", but many won't. If the tool is what you truly need, then you will find a way to carry it which suits you. If after a while, you find it just too much of a lump to lug around, then you may have to try something in a smaller frame size. Unfortunately the only person who can answer this question is you. How suitable this tool is to other people is somewhat irrelevant. For what it's worth, I find the tool unwieldy, and am less than enamoured by certain features/aspects of it. I am the wrong person for this tool, but that doesn't change whether or not this tool may be right for you. Apologies if this reply is not particularly helpful.

-
well so much Surge talking encouraged me to take it out and carry it as my big LM exclusively for the entire week.
It's one of my less used tools as it stays in the car kit all time, so let's see how it fares.
Hope you enjoy yours!

-
@ThePeacent said:
well so much Surge talking encouraged me to take it out and carry it as my big LM exclusively for the entire week.
It's one of my less used tools as it stays in the car kit all time, so let's see how it fares.
Hope you enjoy yours!

Don't forget to start the 7 day Surge challenge thread to get the badge. If you have not done so already.

-
I have been considering a Surge since all new discussions and challenges.
Yet, have one question, maybe two.
If I understand correctly, the file and saw are interchangeable to the same exchange fitting?If that is correct, are there different files types that are made as the saw blades?
For a larger MT I use and find the ST300 fits many of my needs, I also, use my Rebar for smaller jobs and when I need the added SEX appeal a Rebar has. Yet, of late, my Wave sees EDC work duty, for the file, both sides as required for rough and or fine work. And, the saw for fitting plastic conduit and cleaning edges on broken wood pieces. The OH blade compliment as well is handy why the Surge interest, if I can have it all in the bigger package.
Sent from my iPhone using Tapatalk
-
Well the Surge is on it's way to the house today. I should have it by the time I get home. So tomorrow I will start carrying. I think I am going to ditch my EDC knife and just go all in.
-
Probably everything has been already said. I would just add, IMHO, that the weight difference between the Surge and other full size multi tool isn't that much as to be concerned about. You may have to decide wether to carry something or not but once you have decided to add a multi tool to your EDC and therefore accepted some extra grams, the difference between any full sized MT and the Surge isn't that much as to be a decision point.
I own the Charge TTi (pocket clipped carried) and the Surge besides other smaller ones and use to carry the Charge when I don't have a specifically Surge required anticipated need, but when I carry the Surge (belt sheath, horizontally) the weight difference doesn't distract me.Sent from my iPhone using Tapatalk
-
Came home from work tonight to a package on the table. The Surge has arrived! It's not as big, bulky or heavy as I was anticipating. I'm super stoked to start carrying it. I have already hit the garage and found an old bit kit in a non used toolbox that i will take to work tomorrow and give it a work over in the grinding room to accessorize my new Surge. The only confusion I had from the purchase was the model number. They advertised 830160 and I received 830859. I think it is just a matter of the sheath but I asked the seller anyhow. It is definite the newer model and not old stock. Glad to be part of the Surge Owners Club!
-
Congrats man!
-
@ducttapetech said:
Congrats man!+1

-
New page banana man dance

-
@LoopCutter said:
I have been considering a Surge since all new discussions and challenges.
Yet, have one question, maybe two.
If I understand correctly, the file and saw are interchangeable to the same exchange fitting?If that is correct, are there different files types that are made as the saw blades?
For a larger MT I use and find the ST300 fits many of my needs, I also, use my Rebar for smaller jobs and when I need the added SEX appeal a Rebar has. Yet, of late, my Wave sees EDC work duty, for the file, both sides as required for rough and or fine work. And, the saw for fitting plastic conduit and cleaning edges on broken wood pieces. The OH blade compliment as well is handy why the Surge interest, if I can have it all in the bigger package.
Sent from my iPhone using Tapatalk
Yes, the file and saw are interchangeable
They only make the one file for it but it is the same type as the Wave file
It will take t-shank saws as well and I have a couple of those with me as well when I carry
Never used them but I have them :D It comes with a small sleeve to house them in that slips into the extra pocket of the sheath as well 
-
@Yontz said:
Came home from work tonight to a package on the table. The Surge has arrived! It's not as big, bulky or heavy as I was anticipating. I'm super stoked to start carrying it. I have already hit the garage and found an old bit kit in a non used toolbox that i will take to work tomorrow and give it a work over in the grinding room to accessorize my new Surge. The only confusion I had from the purchase was the model number. They advertised 830160 and I received 830859. I think it is just a matter of the sheath but I asked the seller anyhow. It is definite the newer model and not old stock. Glad to be part of the Surge Owners Club!Can't wait to hear your thoughts on it after some use and congrats on it
Also can't wait to see what kind of bit mods you have in mind

-
Congrats on the Surge, they are a great tool. After a few hours you won't even notice it on your belt. I carried one for years with the full bit kit, saw blades, 1/4" drive ratchet, and extension. The combination pulled me out the mire many times over the years I daily carried it.
I'd recommend a good moly sheath like a skinth, or a good leather sheath like Gohard makes (depends on your material preference). The stock leatherman ones don't last long nowadays, though I did find the nylon lasted longer than their moly ones.
A couple of fine tooth jigsaw blades are always worth carrying as well. They will save you a walk to go get a saw.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login