Received defective Surge.
-
Fully agree, total buzz kill!! I think sending it to LM is the right call. They need to see what's leaving their shop, and hopefully improve on it. I'd be a total baby about it too, lol.
Hope you get it resolved, so you can enjoy!
-
I'd be very peeved if I bought something expensive and it had a QC problem.

I hope you get it fixed soon! -
Just curious if this was packaged in a box or clamshell?
I know you picked from Amazon at a good price, still a good chunk of $, but thinking it was a deal because it was a previous return.
I truly feel your disappointment and hope you the best in getting resolved.Sent from my iPhone using Tapatalk
-
Send it to LM, they will have you fixed in no time.
-
Another one?

-
Hey cap,
Take some close up photos inside the handle with the opener out and some close ups of the end pivot with the opener half way out.
Also picture thw outside of the handle with the opener all the way out so we can see the groove engagement.I am having a seriously hard time picturing what might be afoot.
Others and myself might be able to solve the problem if we see it. Sending it back to LM takea weeks to get it back -
@gerleatherberman said:
Hey cap,
Take some close up photos inside the handle with the opener out and some close ups of the end pivot with the opener half way out.
Also picture thw outside of the handle with the opener all the way out so we can see the groove engagement.I am having a seriously hard time picturing what might be afoot.
Others and myself might be able to solve the problem if we see it. Sending it back to LM takea weeks to get it backI will when I get some time.
-
I'm steamed about this and it isn't even my Surge. I completely get the part about by the time you get it back .. half the fun is gone. I hope you get a 100% Surge to enjoy man, and I hope this gets resolved FAST!

-
@captain spaulding said:
Hey cap,
Take some close up photos inside the handle with the opener out and some close ups of the end pivot with the opener half way out.
Also picture thw outside of the handle with the opener all the way out so we can see the groove engagement.I am having a seriously hard time picturing what might be afoot.
Others and myself might be able to solve the problem if we see it. Sending it back to LM takea weeks to get it backI will when I get some time.
Thank ya, cap!
It would also be nice to know what to look for on the next LM I buy. The only defective LM I ever bought was an OHT off of Amazon. The pliar tips were off a whole 1/16th of an inch and the tips crossed over each other! LM made it right, but that is ridiculous to let something like that leave the facility.
Actually, the truth is, the pliar head should have never made it out of the facility they cast them in down in Mexico. Two times that pliar head made it passed QC teams.
-
Oh,
One last thing cap. You did have the bit driver pushed in all the way into the handle when you tried opening the can opener all the way? Don't firget the surge has clumping tools and they come out all at the same time. The tools on each handle use the same lock engagement bar that falls into a groove on the tool tang when engaged. If the bit driver was pulled out just a tiny bit, then the can opener lock groove won't engage.
I am sure you knew all that, but I just wanted to make sure. -
Yes I held the bit driver down just to make sure.
-
Bummer :(
-

This makes 2 Surges from Amazon in short order. Leathermans team really needs to step it up. I get they have a warranty and will make it right but what about pride? I understand a percentage of duds leaving the LM facility is acceptable to some companies but not for that blatantly obvious issues.
-
This makes 2 Surges from Amazon in short order. Leathermans team really needs to step it up. I get they have a warranty and will make it right but what about pride? I understand a percentage of duds leaving the LM facility is acceptable to some companies but not for that blatantly obvious issues.
Exactly. If they took literally two seconds to test the lock the tool would of never left the factory. I'm just fed up with the increased cost coupled with the lack of quality control these days.
-
@captain spaulding said:

This makes 2 Surges from Amazon in short order. Leathermans team really needs to step it up. I get they have a warranty and will make it right but what about pride? I understand a percentage of duds leaving the LM facility is acceptable to some companies but not for that blatantly obvious issues.
Exactly. If they took literally two seconds to test the lock the tool would of never left the factory. I'm just fed up with the increased cost coupled with the lack of quality control these days.
What pours kerosene on this fire is that Leatherman has increased their prices so much. There has to be some justification for it all !! :ripHairOurEmoji:
-
I am wondering if this increase in pricing is directly due to having to deal with so many QC issues? What chapped my hide was the increase of the MUT and the removal of the Ti pocket clip. Separate issue but doggone it. I get production and all but no one is going to tell me to pass tools on to the consumer if they in fact are not working properly. If I was in the final ( check ) stage I'd be fired for rejecting glaringly obvious issues. Ryans and your tool both have them apparently. Both Surges too which is unsettling. How gosh darn random is that?
I'm bummed for you and Ryan and anyone else who gets a dud. I'm thankful I've not got one but I am getting the feeling the 25 year warranty is killing their ability to send out tools without defects. In some cases really simple issues too. We dont seem to be talking massive problems either

-
Somebody else here just had an issue with a Surge from Amazon. I would just return it to them. Amazon will not even charge you for return shipping. They actually refund them as soon as you ship it back. Make a note of the tracking number just in case. I would then immediately order it again. I would imagine Leatherman would take several weeks to get you one.
-
It's a bummer allot of folks don't have a retailer to go to and get their products. It makes the return and exchange process a little more involved. The convenience of buying from Amazon has a pendulum swing. Times are changing
-
What's going on with LM :-\ there older stuff seems so much better made, come on LM get your act together
Hope you get it sorted out Capt 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
