My first mod: the Victorinox... Al Fresco!
-
@Dutch_Tooler said:
Very nice write-up. Makes me wonder whether I should perhaps mod a SAK myself...Sent on my SM-G930F with Tapatalk
Try it! Beater SAKs are not hard to come by, as are the appropriate tools.

-
Nice work George

If you're making any more out of the parts you have left, give me a yell and I can fix you up with some proper 2.2mm rods, mate

-
I love your mod because you included a fish-scaler - a tool that has grown on me over the years and has many, many uses.

-
Such a great mod and an even greater write-up.
-
Awesome 1st mod...

Sent from my iPhone using Tapatalk
-
Nice work!

-
Fantastic mod and really enjoyable writeup

-
Fantastic walk-through there and a great mod.

-
@kottskrapa said:
Looking good! Nice steps and pics, can't wait to see your next project@sawman said:
I love your mod because you included a fish-scaler - a tool that has grown on me over the years and has many, many uses.
Such a great mod and an even greater write-up.
^^^ This
@Archibald Tuttle said:
Nice work!@Steinar said:
An amusing and well-illustrated read! Thanks for sharing!Thank you so much for all the encouraging comments! I really enjoyed the process, as well as writing it up, and hope it's passing on the inspiration I got from this great forum

@Pablo O'Brien said:
Great mod!
I really should get an automatic punch... A pointy object and a hammer are hardly ideal...A hammer and punch is fine, but an automatic punch is very cheap and makes life much easier!
@50ft-trad said:
Nice work George
If you're making any more out of the parts you have left, give me a yell and I can fix you up with some proper 2.2mm rods, mateThank you! That's jolly good of you. The stuff I've made on the 'lathe' seems to work well, especially since finding out, surprisingly, that the diameter isn't actually that critical! Being as how the holes in the hook & awl are 2.5mm, I'm thinking about drilling the liners on a future mod to use larger rod for strength (this depends in springs too - we'll see...) Anyway, thank you, 50ft

@Pablo O'Brien said:
Very nice write-up. Makes me wonder whether I should perhaps mod a SAK myself...
Try it! Beater SAKs are not hard to come by, as are the appropriate tools.

You should definitely try it, Dutch; it's very satisfying!
Where do you find to be a good source of beater SAKs, Pablo? Asking for a friend... ;-) -
@George S said:
Where do you find to be a good source of beater SAKs, Pablo? Asking for a friend... ;-)Unfortunately, beater SAKs seem to be rather thin on the ground here in Ireland or the UK, as eBay does not allow knives to be sold here.

I told Dutch_Tooler(who lives in the Netherlands?) that "beater SAKs are not hard to come by", because eBay seems to be a great source outside of Ireland and the UK, and it seems to me that finding beater SAKs in flea markets and such in some other regions(especially Switzerland :ahhh ) is common. MT.O is a good option also anywhere.
Here on the British isles, I would say MT.O is the only good source of beater SAKs?

I'd be happy to be proven wrong! -
@George S said:
@50ft-trad said:
Nice work George
If you're making any more out of the parts you have left, give me a yell and I can fix you up with some proper 2.2mm rods, mateThank you! That's jolly good of you. The stuff I've made on the 'lathe' seems to work well, especially since finding out, surprisingly, that the diameter isn't actually that critical! Being as how the holes in the hook & awl are 2.5mm, I'm thinking about drilling the liners on a future mod to use larger rod for strength (this depends in springs too - we'll see...) Anyway, thank you, 50ft

If you want to make them all 2.5mm, you'll need to drill out the tools and backsprings too, for which you'll really need a drill press and carbide drill bits. Offer still stands on the 2.2mm whenever you need it. I'm just the other side of the M1 to you, so even if I stuck a 2nd class stamp on them, you'd still probably get them the next day ;) Drop me a PM as and when you need some

-
:D
I
IT!
-
Badges awarded
Congrats

-
Congratulations on the badges!

-
Well deserved!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login