Firefly Ferro rod.
-
Here is my ferro rod. Not as small as the firefly ( 58mm in pic ). I like the nano striker myself. I got a knock off and yes its fiddly but nicely made. I keep tinder quick within. My go to is always a lighter when out hiking but I do carry a Ferro rod.

-
@50ft-trad said:
I'm a big believer that you should plan your kit based on suddenly regaining consciousness in the middle of nowhere at dusk or later, already tired, cold, dehydrated and disoriented, and then realising that you've lost the use of an arm or leg due to injury.

Sent from my iPhone using Tapatalk
I think that might be a big too heavy for me to lug about, and the functionality seems rather limited

-
@50ft-trad said:
@50ft-trad said:
I'm a big believer that you should plan your kit based on suddenly regaining consciousness in the middle of nowhere at dusk or later, already tired, cold, dehydrated and disoriented, and then realising that you've lost the use of an arm or leg due to injury.

Sent from my iPhone using Tapatalk
I think that might be a big too heavy for me to lug about, and the functionality seems rather limited

I have to admit to thinking along the lines of 'just how many mini bic's could I carry for the same size/bulk/weight' when looking at these kinds of solutions where you need to carry a rod, tinder and striker.
-
Why replace the toothpick? I use that one quite often.
How about replacing the pen on plus-scales? Is there a mod, too?
Guess I have to do it myself.
Good idea though.I probably use the toothpick more than the tweezers :D I wonder if he will do one to fit in the pen slot ? I guess due to not many having plus scales he had gone with the toothpick option

I think the idea behind this is that it's easier to improvise a toothpick than it is to improvise tweezers or a pen.
-
Why replace the toothpick? I use that one quite often.
How about replacing the pen on plus-scales? Is there a mod, too?
Guess I have to do it myself.
Good idea though.I probably use the toothpick more than the tweezers :D I wonder if he will do one to fit in the pen slot ? I guess due to not many having plus scales he had gone with the toothpick option

I think the idea behind this is that it's easier to improvise a toothpick than it is to improvise tweezers or a pen.
Guys come on. If you are in the woods and cannot go without a toothpick or make one then...........
-
@50ft-trad said:
@50ft-trad said:
I'm a big believer that you should plan your kit based on suddenly regaining consciousness in the middle of nowhere at dusk or later, already tired, cold, dehydrated and disoriented, and then realising that you've lost the use of an arm or leg due to injury.

Sent from my iPhone using Tapatalk
I think that might be a big too heavy for me to lug about, and the functionality seems rather limited

I have to admit to thinking along the lines of 'just how many mini bic's could I carry for the same size/bulk/weight' when looking at these kinds of solutions where you need to carry a rod, tinder and striker.
Mini bic is great. Tinder can be sourced from lint on out clothing or a small swatch of our clothing. With so many mind sets on "what if" I find there is no right or wrong. Whatever suits you and you can effect fire if need be then great.
-
One mans thoughts. Also read the comment from Far North Bushcraft and Survial. This guy is from Alaska and has IMO a great channel.
Video on the lighter starts at 5:30ish
https://youtu.be/M-AR_6yRI9A -
Another mans thoughts. Like I said, do what you are comfortable with. Practice that skill like 50ft said, in the worst case scenario.
https://youtu.be/nX040jETvdA -
@pomsbz said:
...thinking along the lines of 'just how many mini bic's could I carry for the same size/bulk/weight' when looking at these kinds of solutions where you need to carry a rod, tinder and striker.You shouldn't need to take tinder with you, IMO. That's what the SAK is for. Just process material you find in the wild.
Sent from my iPhone using Tapatalk
-
@Aloha007 said:
Mini bic is great. Tinder can be sourced from lint on out clothing or a small swatch of our clothing...Be careful with that plan. Many of our modern clothing has been treated to be fire resistant. I harvested dryer lint to use as tinder. I put a match to it to test it, nothing. Put a butane lighter to it, nothing. A few wisps of smoke, but it never ignited. Apparently, many of my clothes are fire resistant to comply with California title 19 (I think that's the right code). I'd suggest intentionally wearing non-flame resistant clothing when going out in the bush if you plan to use your threads for tinder. Sounds crazy to intentionally wear combustible clothing, but that's what you'll need if you want to use your pocket lint or lose threads as tinder.
Sent from my iPhone using Tapatalk
-
@Aloha007 said:
One mans thoughts. Also read the comment from Far North Bushcraft and Survial. This guy is from Alaska and has IMO a great channel.
Video on the lighter starts at 5:30ish
https://youtu.be/M-AR_6yRI9AMaybe I'm a little biased because I lived in Alaska for 32 years (grew up there. I guess you could call me an Alaskan), but generally I listen when Alaskan outdoorsmen talk about bushcraft. Less than 1/10 of 1% of the land mass of Alaska is inhabited by man. It's very rural and very wild up there and the climate is rough. So Alaskan bushmen tend to know what they're talking about. Excluding myself. I'm sure I know much less than many of them. In any case, thanks for sharing the video.
Sent from my iPhone using Tapatalk
-
Interesting,,
JR -
Mini bic is great. Tinder can be sourced from lint on out clothing or a small swatch of our clothing...
Be careful with that plan. Many of our modern clothing has been treated to be fire resistant. I harvested dryer lint to use as tinder. I put a match to it to test it, nothing. Put a butane lighter to it, nothing. A few wisps of smoke, but it never ignited. Apparently, many of my clothes are fire resistant to comply with California title 19 (I think that's the right code). I'd suggest intentionally wearing non-flame resistant clothing when going out in the bush if you plan to use your threads for tinder. Sounds crazy to intentionally wear combustible clothing, but that's what you'll need if you want to use your pocket lint or lose threads as tinder.
Sent from my iPhone using Tapatalk
Great point. I'm thinking the cotton bandana I always carry would suffice as tinder. I never actually thought about other clothing so thanks for your post.
-
I have yet to experience conditions where my mini bic and tiger tim wafer firelighter combo have failed me. Extreme cold, extreme wind, extreme wet.
Been in lots of situations where, if I'd just had my ferro rod on me, it would have been insufficient or more time-consuming.
That being said, I carry (and use) both.
-
Incorporating Ferro rods as a backup to your lighter is not a bad Idea. Giving up another function however is a personal decision that should not be taken lightly.
I for one like the idea of the Firefly. Its is a cool concept that many will find usefull, but its not for me.I have already incorporated 2 mini rods in my edc. The first is on my OH Trekker, notice the middle bead. The lanyard is long enough to reach the spine of the saw to use it without removal.
The second are those cheap fire starter buckles. I'm too cheep to replace my edc watches and a new band costs half as much as a new watch. So I have braided bands on both my Timex Expedition and Casio Forester (pic).
Those more than serve my needs in the event of a Bic or Zippo failure.

-
@Noa Isumi said:
I have already incorporated 2 mini rods in my edc. The first is on my OH Trekker, notice the middle bead. The lanyard is long enough to reach the spine of the saw to use it without removal.That is a very nice lanyard! It's the first time I see a firestarter bead in a setup I like! I'm going to make one of those too.
-
@Noa Isumi said:
Incorporating Ferro rods as a backup to your lighter is not a bad Idea. Giving up another function however is a personal decision that should not be taken lightly.
I for one like the idea of the Firefly. Its is a cool concept that many will find usefull, but its not for me.I have already incorporated 2 mini rods in my edc. The first is on my OH Trekker, notice the middle bead. The lanyard is long enough to reach the spine of the saw to use it without removal.
The second are those cheap fire starter buckles. I'm too cheep to replace my edc watches and a new band costs half as much as a new watch. So I have braided bands on both my Timex Expedition and Casio Forester (pic).
Those more than serve my needs in the event of a Bic or Zippo failure.Efficient way to carry ferro rods
. -
Ive fit the smallest firesteel firesteel.com sells, into the back drawer of the Ti scales I make. Its small, but does work fine.
This idea on the surface seems ok, but...
- This is too thin to not snap easily. Much thinner than the thinnest rod Ive used, and have had that snap. This would snap after a few uses.
- The toothpick is retained in the scale not by friction but by a little riser catch on the toothpick body. As soon as that was used and no longer there how would the firesteel be retained? It would just fall out. (this is the reason I dont want to make Ti toothpics, too fiddly)
- The video of it in use if very deceptive. That is not what a firesteel looks like in use, nor creating fire. Maybe he had lighter fluid on his tinder?
On a traditional SAK, Id just look to attached some type of firesteel to the keychain ring. There are longs of small ones with various options. Google keychain firesteel.
-
- This is too thin to not snap easily. Much thinner than the thinnest rod Ive used, and have had that snap. This would snap after a few uses.
- The toothpick is retained in the scale not by friction but by a little riser catch on the toothpick body. As soon as that was used and no longer there how would the firesteel be retained? It would just fall out. (this is the reason I dont want to make Ti toothpics, too fiddly)
- The video of it in use if very deceptive. That is not what a firesteel looks like in use, nor creating fire. Maybe he had lighter fluid on his tinder?
I think you are asking the right questions. I think to prevent it from breaking you have to scrape the firesteel on the side, not the top or bottom.
That way the depth of the material is thicker. Nor will the catch be worn down as quickly.I do like the concept though, I'll be waiting for the reviews. If it's good I will order a set.
-
I've used a very small steel. 2 inches long and very thin. As you know, with each use, some of the bar is lost as you scrape it. My concern is a SAK toothpick sized steel will get whittled away in no time.
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login