The Pioneer X Owners Club
-
i.ebayimg
Nice collection!
Correct me if I'm wrong. Am I looking at a Pioneer X, minichamp alox, Farmer, Electrician, and Harvester?
Sent from my iPhone using Tapatalk
You are correct TY, that is the vendor, so that post is basically a mini brochure.
-
:D

-





Sent from my iPhone using Tapatalk
-
Looks good zrxoa!
JR -
-
I love the pioneerX or farmer on a clip, that’s my edc knife, but mine are the locking clips.
JR -





Sent from my iPhone using Tapatalk
nnniiiccceee!!!

no air gaps between scale and clip?
Well, the clip doesn’t set flat on the scale. There is the adhesive strip. I’ll get a close up pic later and post it.
Sent from my iPhone using Tapatalk
I thought the strip is a gooey substance like a glue that will fill in spaces when left overnight to cure
will wait for the close up pics 
-
One thing to remember here is I used a used clip. The clip was originally on something else and when I removed it I had to scrap the original adhesive strip. I bought some 3M strips and trimmed them to fit.
When first installed, the strip was very gooey and moveable. Once setting overnight it becomes very rigid, yet flexible enough.
Sent from my iPhone using Tapatalk
-
@zrxoa1 said:
One thing to remember here is I used a used clip. The clip was originally on something else and when I removed it I had to scrap the original adhesive strip. I bought some 3M strips and trimmed them to fit.When first installed, the strip was very gooey and moveable. Once setting overnight it becomes very rigid, yet flexible enough.
Sent from my iPhone using Tapatalk
The same 3M adhesives as the original, the VHB?
-
One thing to remember here is I used a used clip. The clip was originally on something else and when I removed it I had to scrap the original adhesive strip. I bought some 3M strips and trimmed them to fit.
When first installed, the strip was very gooey and moveable. Once setting overnight it becomes very rigid, yet flexible enough.
Sent from my iPhone using Tapatalk
The same 3M adhesives as the original, the VHB?
Actually, no. I couldn’t find those so here is what I got. Seems to be doing fine so far.

Sent from my iPhone using Tapatalk
-
One thing to remember here is I used a used clip. The clip was originally on something else and when I removed it I had to scrap the original adhesive strip. I bought some 3M strips and trimmed them to fit.
When first installed, the strip was very gooey and moveable. Once setting overnight it becomes very rigid, yet flexible enough.
Sent from my iPhone using Tapatalk
The same 3M adhesives as the original, the VHB?
Actually, no. I couldn’t find those so here is what I got. Seems to be doing fine so far.

Sent from my iPhone using Tapatalk
As long as it stays solidy in place [emoji106]
-
Ok. Here are the best close ups I can get. I did not cut the strips perfectly but I don’t see any gaps.
I plan to order more of the Nite Ize clips for a few more of my ALOX units.


Sent from my iPhone using Tapatalk
-
Got bored tonight here at work and colored the outside of clip with a black marker. So as not to be so obvious in my pocket.

Not sure if it helps or not. LOL. Easy enough to take off if I don’t like it!
Sent from my iPhone using Tapatalk
-
Nite Ize needs to make these in flat black for times like this!
Sent from my iPhone using Tapatalk
-
Would be cool if it were a Black PX as well...

Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

There's the other one that passed my way!