Car boot finds
-
You are right Steve,
guess I could try taking it apart and removing some of the back spring

-
In with the bits I picked up on Sunday was this beech handle thingy

If you unscrew the top you find these tiny tiny little tools :o

-
Nice find!
JR -
@Sparky415 said:
You are right Steve,
guess I could try taking it apart and removing some of the back spring


-
@Sparky415 said:
You are right Steve,
guess I could try taking it apart and removing some of the back spring

If you just want to soften off the backspring, you can do it without dismantling it.
With the blade open, if you grind the outside of the backspring and spine together, you'll maintain the alignment when open, but still thin down the backspring. Gently does it though. As backsprings aren't that thick, a little metal removal can make a lot of difference.

-
Thanks Al, I might have to give that a go

-
@Sparky415 said:
In with the bits I picked up on Sunday was this beech handle thingy

If you unscrew the top you find these tiny tiny little tools :o

What a beaut old tool!
-
@50ft-trad said:
https://www.gracesguide.co.uk/Thomas_Staniforth_and_CoOnly a couple of miles from where I grew up, and I never knew they existed :ahhh
They made all kinds of good stuff :tu:
-
In with the bits I picked up on Sunday was this beech handle thingy

If you unscrew the top you find these tiny tiny little tools :o

What a beaut old tool!
+1
-
@Sparky415 said:
In with the bits I picked up on Sunday was this beech handle thingy

If you unscrew the top you find these tiny tiny little tools :o

Good score on that clever tool! Looks like it might be handy. How solid is it?

-
It feels OK in the hand, so much so I thought it was solid at first
Chucked it up in a drill and cleaned with sand paper
Filled the crack that appeared with CA glue

After some linseed oil then a coat of handle wax


-
Great finds Tony

-
Great finds, Tony!

Any idea what are those little tools used for?
-

It's a real multitool, theres an awl, saw, countersink, and screwdrivers
They all need atention I might put it to one side for the time being
-
@Sparky415 said:
It's a real multitool, theres an awl, saw, countersink, and screwdrivers
They all need atention I might put it to one side for the time being
I check in here every day to see if they have been cleaned up yet. :'(
-
It's a real multitool, theres an awl, saw, countersink, and screwdrivers
They all need atention I might put it to one side for the time being
I check in here every day to see if they have been cleaned up yet. :'(
But I get bored easily :ahhh
-
A few bits this morning (not the knife)

-
Nice little adjustable spanner

-
Thanks Steve
The wrench is a nice little thing
Once I had put the knurled nut and spring in the right way around ;)Stamped
167 19/\45 (MOD arrow)
BRITISH MADEalso stamped DN on both sides by the previous owner?
Stamped on the reverse
12/2418 5
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
