Brainstorming - 84mm fieldmaster sak
-
@Pablo O'Brien said:
@Pablo O'Brien said:
[quote author=jaya_man link=topic=73815.msg1564760#msg1564760 date=1507457592]
As long as it’s 84mm... It should fit...
Sent from my iPhone using Tapatalk
Great! Now I must look up what diameter brass rods I need and I am good to go.
Ps: I just realized, there is no saw in the 84mm tinker. I have no idea why I thought there was one. Well, so I need to find another 84mm sak with a saw.

All 2.25mm...

But that size rod is rarer than hens teeth. :ahhh
2.2mm is more common and works good.
If you can't find any (like me
) you can stick some larger brass rod in a drill and file it down, repeatedly test fitting... Use 3/32" (or 2.5mm, but 3/32" is easier) for this.+1...
Look for the lumberjack/walker for the saw...

Sent from my iPhone using Tapatalk
The 84mm models with saw in production are the walker and my first Victorinox plus, right?

The lumberjack is discontinued.
[/quote]
Lumberjack is now the walker... And yes, My First Victorinox has a version with the saw... just thought of the walker/lumberjack as it might be cheaper than the MFV...Sent from my iPhone using Tapatalk
-
I've just got a used my first victorinox for 11€ + 5€ shipping.
Now for the brass rods...

-
Has anyone tried drilling out the holes to some more common diameter?

-
I have only drilled out the holes of the 91mm scissor and inline phillips to 3mm for my mod..
Enlarging the holes should be ok... just note that you won’t be able to re-use the standard scales though
Sent from my iPhone using Tapatalk
-
From what I've heard, it's tricky. You need carbide drill bits.
It would be easier to stick some larger brass rod into a drill and use a file to decrease the diameter.
I've found it quite easy to file 3/32 brass rod to the appropriate size when I figured out my technique. Filing down 2.5mm brass rod shouldn't be much harder, certainly easier than drilling out pivot holes. :ahhh -
I'll have to give this a bit more thought... Oh well, I should have time enough before all the sacrificial SAK-s arrive. >:D
-
I've received my first victorinox sak so now the saw is mine.

And the long wait for the golfer to come from USA begins...
Ps: Are such trivial updates considered spamming and is there a forum badge I can get for it?

-
@lister said:
I've received my first victorinox sak so now the saw is mine.
And the long wait for the golfer to come from USA begins...
Ps: Are such trivial updates considered spamming and is there a forum badge I can get for it?

Nope, not nearly frequent enough to be spam! Better get working on fixing that.

We used to have a spam badge, but it was taken away because of... Too much spam.
::) -
There were three levels of the spam badge, and the requirements were all in the format of "post X posts in 1 hour". I can't remember which level it was, but I went for the one with the requirement "post 50 posts in 1 hour". :ahhh
I opened up 50 tabs and carefully wrote 50 replies, to all sorts of topics, and clicked post on one after the other. :D -
I can see why the badge got removed... :D
Back to topic:
The scissors (if the tracking info is correct they should already be in my country) seem quite scratched in the pictures form Ebay. So I was thinking of polishing them. What do you guys use for that? Progressive grades of sandpaper (800 proceeding to 2000 for nice finish if I remember correctly?) or polishing paste and the felt wheel on dremel?
The scissors seem to be the kind with screw pivot. Are these as good as the new kind? Is the spring different and if so can I still get replacements? Is it a good idea to unscrew the pivot so I can polish and sharpen them more easily? If I loose the screw how screwed am I ( ::))? Should I use loctite / nail polish when reassembling the scissors? :ahhh
-
I think that the recommended max grit was 1500, and polishing stuff from then upwards.
I could be wrong, I've never done it. ::)
Starting grit would depend on the scratches, err on the higher side if you're not sure, so as not to make extra work for yourself.I'd be more concerned about the scissor edges, they may need sharpening.

Yes, you can take the screw out with the proper screwdriver.

I don't know how hard the screw would be to replace, so don't lose it. ;)
Use a screwdriver that fits well so you don't damage the screw. And when it's properly tightened, the movable part of the scissors that you squeeze with your thumb should be noticeably wobbly when it's fully open, and nice and tight when mostly closed, like in in actual use.Yes, they are as good as the new kind, possibly better because you can "tune" the tightness to personal preference after sharpening them.
I found on mine that the screw would keep loosening, so I locktite'ed it(actually super glue because I have no locktite.
) to keep the screw in place.
So yes, locktite. Make sure it's not the permanent kind. :PI think the new standard 91mm spring should work if it's the same shape that those scissors have.

Not sure. -
I remember reading something about the older scissors not having the groove in which the slight protrusion of the spring fits, but I am not sure?
-
True, but that shouldn't be an unsurmountable obstacle.

Maybe sanding? I don't know much about this, only that it can be made to fit. -
Lister - any progress on the project?
Regarding the 84mm plus scales, here is an interesting video on Youtube - this mod shouldn't be to hard for a modder :)
https://www.youtube.com/watch?v=dazPICJljxM -
Just completed my Compact Tinker Small... Put on the 84mm custom plus scales I did a while back...

Sent from my iPhone using Tapatalk
-
Just completed my Compact Tinker Small... Put on the 84mm custom plus scales I did a while back...

Sent from my iPhone using Tapatalk
Nice one. Are those 91mm or 84mm scissors ?Thanks G_D... 91mm scissors... had to modify the backspring and scissors to make it fit...
Sent from my iPhone using Tapatalk
-
@G_D said:
Lister - any progress on the project?
Regarding the 84mm plus scales, here is an interesting video on Youtube - this mod shouldn't be to hard for a modder :)
https://www.youtube.com/watch?v=dazPICJljxMWell, I've got all the knives. Still don't have the brass rods or a ball-peen hammer (
, :D). -
Just completed my Compact Tinker Small... Put on the 84mm custom plus scales I did a while back...

Sent from my iPhone using Tapatalk
Nice one. Are those 91mm or 84mm scissors ?Thanks G_D... 91mm scissors... had to modify the backspring and scissors to make it fit...
Sent from my iPhone using Tapatalk
I like the looks of 91mm scissors on 84mm frame, makes them visually larger and more robust. Any tutorial pictures of how you did it?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login