Chuck Yeager Challenge
-
@NorCalJim said:
I have read some user reviews that include complaints about being unable to sufficiently clean the file. I wonder if that is an issue for any of you in this challenge.Great question, Jim. I haven't run into this yet.
I have a couple of ideas about cleaning the file. First, a good soak and wipe with kerosene. Kerosene is a great cleaner. Or you could use Ballistol or WD-40. Both of those are good cleaners as well. Perhaps a penetrating oil like Blaster or Break Away.
If those don't work, I might try using an ultrasonic jewelry cleaner with either Simple Green or kerosene. Might need a light brushing with a brass brush as well. Last thing I'd try would be soaking a file in a 50/50 solution of acetone and Ford ATF. I know that sounds odd, but I've heard that it works wonders on old oxidation. Combine that with a brass brush or brass wool, and I think you'd see great results.
Please let us know what you end up using and what actually works!
-
I have read some user reviews that include complaints about being unable to sufficiently clean the file. I wonder if that is an issue for any of you in this challenge.
Great question, Jim. I haven't run into this yet.
I have a couple of ideas about cleaning the file. First, a good soak and wipe with kerosene. Kerosene is a great cleaner. Or you could use Ballistol or WD-40. Both of those are good cleaners as well. Perhaps a penetrating oil like Blaster or Break Away.
If those don't work, I might try using an ultrasonic jewelry cleaner with either Simple Green or kerosene. Might need a light brushing with a brass brush as well. Last thing I'd try would be soaking a file in a 50/50 solution of acetone and Ford ATF. I know that sounds odd, but I've heard that it works wonders on old oxidation. Combine that with a brass brush or brass wool, and I think you'd see great results.
Please let us know what you end up using and what actually works!
Good suggestions! Naphtha & lighter fluid are petroleum products like kerosene and are known to be excellent cleaners. I will start with what I have on hand and expand to other products as needed. My specific objective is to be able to rehab the file but a deeper objective is to test this type of cleaning on a difficult subject. Because of the nature of a file, I can't use my usual progressively finer sanding technique followed by rubbing compound/polishing with a Dremel. I have been recovering from a deep upper arm wound on my dominant hand side so I am not certain when I can start. I will definitely share my results.

Jim
-
I'm not at all a germaphobe and I believe the likelihood of contracting salmonella from uncooked poultry is on the very low side and even if contracted it rarely ends in death unless there is some other mitigating factor like immune system condition. I try to keep knife use separation more along the lines of working with toxic chemicals and materials vs. food use. For instance, I wouldn't use a knife that had recently contacted brake fluid to cut up an apple, though I did grow up around plenty of folks that would consider even that to be prissy :D
-
10-11
The corner of this coffee bag didn't rip off correctly. Rather than trying again, and risking being pelted with grounds, I used the scissors for a proper trim job.

Sent from my SAMSUNG-SM-N900A using Tapatalk
You have my vote for Executive photojournalist. :)
Jim
Undeserving, I'm sure. But, thank you just the same. I'm having fun and really trying to use this knife as The one tool. Away from home, I have yet to want for more. At home in the woodshop, I've got dedicated tools.
I'll be working on my walking stick project tomorrow and may find an opportunity to use the Executive.
Sent from my SAMSUNG-SM-N900A using Tapatalk
-
10-11
The corner of this coffee bag didn't rip off correctly. Rather than trying again, and risking being pelted with grounds, I used the scissors for a proper trim job.

Sent from my SAMSUNG-SM-N900A using Tapatalk
You have my vote for Executive photojournalist. :)
Jim
Undeserving, I'm sure. But, thank you just the same. I'm having fun and really trying to use this knife as The one tool. Away from home, I have yet to want for more. At home in the woodshop, I've got dedicated tools.
I'll be working on my walking stick project tomorrow and may find an opportunity to use the Executive.
Sent from my SAMSUNG-SM-N900A using Tapatalk
One of things I appreciate about this particular challenge is the story-telling using words and photos. My thanks to you and the others who have taken the time to tell your stories and capture illustrations with photos!

Jim
-
Day 12
When I have a vic manager for edc, often used it to replacing battery. The story didn't changed, so I used the tip of the file to do the work.

-
Nice!
-
Didn't you just get this? Luckily Nintendo products are generally easy to repair and components are easy to get. Good luck!
@Nix said:
...I think we, as a current generation, are a bit more squeamish and germ-a-phobic than our ancestors......Still, I figure that if I carry a folder, I should feel confident using it...
... I think it's a good idea to figure out how to carry, use, clean, maintain, and sharpen one's folder...I concur. While being more 'clean' than our ancestors we also have more allergies because of it. For example from over filtration of air (or the lack of cleaning filters) in buildings.
While cleaning our knives is important, how 'clean' are they anyway? We carry them next to out scrotum for days on end! :ahhh@Nix said:
...Hang in there! We're only 1/3 the way through the challenge, but the rest will fly by...As they say, time flies when you are having fun! And it isn't called a challenge for nothing!
October 11th
We're about a third into the challenge. I've been carrying the Executive as my only knife every day.
So far, these are the tools I used are the scissors, nailfile, large blade and tweezers.
That's not a whole lot considering the Executive has 10 functions. It's the same with my usual daily carry, the Handyman. I'm tempted to do a "1 month with the Handyman" after this challenge. Just to see what tools I usually use and which I don't. I dare to say that the main reason to carry the Handyman is sentimental value.
Alright, that's enough philosophical babbling. On the the (not so) pretty pictures.Today the Exec mostly opened packages.

Executive opening noodle packets
Executive opening 'pepernoten' Sweet Chili and Cinnamon Ginger flavourPepernoten are a variety of spiced bisquits. They are traditionally eaten with 'Sinterklaas' which is in turn the origin of Santa Claus. Sinterklaas' helpers called Zwarte Piet (Black Piet) throw them around the room. We were talking about how clean our knives were just a minute ago? Yes, we eat candy off the floor!
Tonight was swim night again, so I had to leave the Exec in my locker.
After swimming we treat ourselfs to Haribo Frogs. Again, the Executive opened the package.
Executive opening more candyThe last entry is special to me. My girlfriend got me a present.
My Executive helped me unpack. I haven't taken a photo of the contents, so I'll make this a cliffhanger... tomorrow you will see what I got!
Executive, present -
I have read some user reviews that include complaints about being unable to sufficiently clean the file. I wonder if that is an issue for any of you in this challenge.
I haven't had a problem cleaning any multi-tool files from regular use, worst case a little bit of work with a brush (old toothbrush, nail brush, etc) is plenty.
For cleaning blades etc. I use plain 91% rubbing alcohol all the time, zaps all the adhesive residue and smears from opening packages and the like. Victorinox stainless is particularly easy to wipe clean with a little isopropyl in my experience.
If you're talking about removing rust, I haven't had that specific issue... but if it were me, based on experience with cleaning other tools I'd let it soak in some vinegar to break down the oxidation, then try a simple brush since that can get in between the teeth. I'd start with a soft brush, and if that doesn't work maybe a metal brush. A dremel with wire wheel is also really good at rust removal, I've used that many times on old tools and the small bristles are helpful for getting in detail areas.
Good luck... if you have any success let us know!

-
Day 12: Exec with a can of Trader Joe's finest!

-
I have read some user reviews that include complaints about being unable to sufficiently clean the file. I wonder if that is an issue for any of you in this challenge.
I haven't had a problem cleaning any multi-tool files from regular use, worst case a little bit of work with a brush (old toothbrush, nail brush, etc) is plenty.
For cleaning blades etc. I use plain 91% rubbing alcohol all the time, zaps all the adhesive residue and smears from opening packages and the like. Victorinox stainless is particularly easy to wipe clean with a little isopropyl in my experience.
If you're talking about removing rust, I haven't had that specific issue... but if it were me, based on experience with cleaning other tools I'd let it soak in some vinegar to break down the oxidation, then try a simple brush since that can get in between the teeth. I'd start with a soft brush, and if that doesn't work maybe a metal brush. A dremel with wire wheel is also really good at rust removal, I've used that many times on old tools and the small bristles are helpful for getting in detail areas.
Good luck... if you have any success let us know!

I am still trying to get a handle on what makes the Executive nail file hard to clean/maintain. From reading user reviews, I have noted a claim that the original file was a cross-cut design and a newer version is a single-cut design. I use my silver Cadet's nail file often and its excellent appearance remains unchanged. Looking at e-bay models, I see the usual (correctable) imperfection on the smooth blades but the nail files on the Executive in many instances spoil the overall appeal of this SAK. Happily, I have two new Executives on the way (one black and one red). I suspect that the way I intend to use the Executive will keep these SAKs looking great. My first two rehab candidates have slightly blemished files and the third has a significantly blemished file. This is not rust and I am hoping to rehab it with petroleum products and brushes.
This represents a new challenge for me in that there are time-tested approaches for the smooth metal tools. One of my Grand Prixs showed up with a scratched and blemished blade that now is pristine with a mirror finish. In my impatience, I didn't get a "Before" photo. No guarantee that I won't be impatient this time but I hope I end up with before and after photos. I also hope that the after photo is pristine but that remains to be seen.
Jim
-
@Barry Rowland said:
Day 12: Exec with a can of Trader Joe's finest!

+1 to this. My Ambassador is still doing steady duty on the post and nail filing. I did try and find a Black Executive yesterday but failed and came away with this from the Vic store in London together with a keyringless Sportsman. Both good paperweights for the time being ....

-
Nice grab Bill!!

-
I'm planning on a 4000 mile road trip, starting tomorrow. Having at least a slight sense of responsibility, I decide to give the truck a going over. Checked fluids, lights, tire pressure, and made sure that there is a fresh pack of chewing gum in the glove box. The Executive blades got a touch-up, too. I'm feeling ready. I'll try to post to this thread via Taptalk as I go.
After overfilling the tires, I used the tip of the nail file tool to reduce the tire pressure to spec. Quite handy.

-
:o :ahhh
That Exec is too cool to lose. :D
-
@Nix said:
I'm planning on a 4000 mile road trip, starting tomorrow. Having at least a slight sense of responsibility, I decide to give the truck a going over. Checked fluids, lights, tire pressure, and made sure that there is a fresh pack of chewing gum in the glove box. The Executive blades got a touch-up, too. I'm feeling ready. I'll try to post to this thread via Taptalk as I go.After overfilling the tires, I used the tip of the nail file tool to reduce the tire pressure to spec. Quite handy.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

