Non Multitools
-
-
Back to topic, I mentioned a Cobalt tool set similar to Grant’s Stanley set. This rides in personal pickup, complete set of many tools for both Metric and SAE, with 1/4”, 3/8”,& 1/2” Drive tools.





If you watch Lowes ads before Thanksgiving, sometimes a couple of weeks before, this set can be had for around $100. They are snatched up quickly at the deeply discounted price. Like 66% off.
Sent from my iPhone using Tapatalk
-
If it gets more traffic than the SOG room, it will be a success.
:D
-
@LoopCutter said:
Back to topic, I mentioned a Cobalt tool set similar to Grant’s Stanley set. This rides in personal pickup, complete set of many tools for both Metric and SAE, with 1/4”, 3/8”,& 1/2” Drive tools.





If you watch Lowes ads before Thanksgiving, sometimes a couple of weeks before, this set can be had for around $100. They are snatched up quickly at the deeply discounted price. Like 66% off.
Sent from my iPhone using Tapatalk
That's a great looking set! I wish the Stanley set had more "generic" type storage like yours so I could toss in the spare bits and smaller sets on tracks and keep them all in the same place.
The Stanley set I have is usually $399 according to Canadian Tire but was on sale for $119, which is pretty typical for Canadian Tire- never buy tools at full price, because they will probably be on a huge sale a week later. The wrenches I got, for example, are usually $100 for the Metric and $100 for the SAE set but a friend of mine bought them each half off. He then thought it was an impulse purchase and was going to return them and I stopped him and paid his refund for him and took the wrenches. And I'm glad I did, as I use them an awful lot and I really like them.
Def
-
@Grant Lamontagne said:
So "General Tool Discussion" isn't good enough?
Def
With over 6700 topics, and almost a quarter of a million posts, there's certainly nothing lacking about the General Tools forum.

However, I think a single purpose handtool section would be a damn good idea. Just look at the amount of interest that happens in the Axe forum. Imagine opening that up to pliers, wrenches, hammers, crimps, chisels ..... I think there could be a hell of a lot of potential there. Who knows, there may well be people who speSmurfpillse in collecting different planes, or woodturning chisels, or even calipers or slide rules. We cover things like pens and lights and wallets and bags, and I think it could be a huge success given time, and once the search engines start finding some of the content and putting us forward to people's searches, it could bring a whole array of new tool enthusiasts our way

-
I love tools of all sorts and this thread is just great
I need to get some pics up of all my different tools
Love seeing all the pics in here already

-
I'm looking forward to seeing some of your masonry tools!
Def
-
I feel a new sub forum would be a great idea. I personaly have learned more than I could have ever imagined in the short time I've been a member. I've learned a lot in the general forum but the brand specific dedicated subs are such a welth of info that they have challenged and or changed many of my preconceived belifes. I think such a section as this could realy help those of us who work daily with hand tools and are also looking to learn from others what works for them. I had prety much sworn off Leatherman after some bad experiances. After seeing so much love for them and the genorosity of another member I have found that Leatherman realy is serious contender in the MT world. I know I'm not the only member with a simular story. Just imagine how many of us could be helped with a dedicated hand tool section.
This thread alone has shown some great stuff. Just imagine how much more there is.... -
@Douglas said:
I feel a new sub forum would be a great idea. I personaly have learned more than I could have ever imagined in the short time I've been a member. I've learned a lot in the general forum but the brand specific dedicated subs are such a welth of info that they have challenged and or changed many of my preconceived belifes. I think such a section as this could realy help those of us who work daily with hand tools and are also looking to learn from others what works for them. I had prety much sworn off Leatherman after some bad experiances. After seeing so much love for them and the genorosity of another member I have found that Leatherman realy is serious contender in the MT world. I know I'm not the only member with a simular story. Just imagine how many of us could be helped with a dedicated hand tool section.
This thread alone has shown some great stuff. Just imagine how much more there is....Beautifully said, Douglas!

-
I typically use Craftsman hand tools when working on my big ol' Blazer, the old Jeep GC, or my girl's car. To be clear, they are almost all older Craftsman tools in old Craftsman metal tool boxes, except the set I got 15 or 20 years ago and that's tough plastic. They had a great warranty, too. No pics at the moment.
Having posted pics of my Super Tool being used to fix my really old Miller's Falls no. 5a hand drill, I can say I enjoy a working with a nice old hand tool.
In my opinion, the short time I have been part of this group, Grant et al does a nice job here and at SOSAK. The info that J-Sews has gathered, wow. . I am guessing that at the time this site was started, it filled a need as a valuable resource that was not yet available on the internet.There is a lot of info here on multitools and SAKs and much of it gained first-hand. I'm not sure we would be doing that with a regular tool subsection here.
Searching for info on my Miller's Falls, drills, Buck Brothers chiseles, and old Stanley wooden levels and hand planers I find very detailed info already exists, complete with tool and company history. Places like tool archive and garagejournal have helped me date old S-K ratchets and metal Craftsman tool boxes. Miller's Falls has their own section at oldtoolheaven...
While I like the idea of having a specific spot here for "Dedicated Tools", not to be contrarian, but a word of caution...it would take YEARS to amass that kind of data and knowhow on those subjects, while it already seems to exist elsewhere. Sure it would be fun to talk bout these tools and share pics and stories, but rather than MTO being cited as an authoritarian source, we would likely be citing the work of others. Maybe that's OK...
-
@ThundahBeagle said:
While I like the idea of having a specific spot here for "Dedicated Tools", not to be contrarian, but a word of caution...it would take YEARS to amass that kind of data and knowhow on those subjects, while it already seems to exist elsewhere. Sure it would be fun to talk bout these tools and share pics and stories, but rather than MTO being cited as an authoritarian source, we would likely be citing the work of others. Maybe that's OK...I don't think it the purpose of a subforum would be to become the internet's authoritarian source or encyclopedia of tools? The forum format is more suited exactly for sharing experiences, pictures, stories and questions. And doing that between MT forum members can only be done here.
Honestly I think there are plenty of tools and subjects that hasn't been discussed elsewhere, and even if it where there is nothing wrong with another discussion or source. I sure won't be citing any other site - most likely just my own experiences and questions. And I'm sure no other site has that. I'm sure others here will do the same and over time there will be a valuable resource with unique content.
Every long travel starts with the first step. And sometimes the travel itself is the goal; I don't think there is a planned destination of internet authority.
-
Vidar,
That is a great viewpoint. AND to top it off, seeing as we are also MT guys, our own experiences may be unique in the fact we use our MTs as the standard of comparison on a daily basis.
Thundahbeagle,
I see what you mean regarding the abundance of information and cite sources, but do believe our MT knowledge has us prepared to understand and convey opinions and observations of standard hand tools. Do I think we are the authority on hand tools? Not even close. But, we may after sometime, have something to contribute to the hand tool information highway. Another positive aspect is the more people clicking links to MT.org means more advert views. This generates more ad-based income to the site to keep it going. :) -
@Grant Lamontagne said:
I'm looking forward to seeing some of your masonry tools!Def
Will have to get some of them out and get some pics

-
VIDAR & GEARLETHER,
I hope there is no misunderstanding. I do like the idea, and I would frequent that subcategory. I also know that many of the folks here have a veritable plethora of information on a number of tool subjects. No doubt it would be a positive addition for any member here.
Where I have any concern - and it is minor - is that I feel that this site is a definitive data source on all things Leatherman, and most things SAK, I know we would not be that for hand tools, and that someone else already is.
The question is: What do we want to be? Do we want to be the definitive source on X, or just another source who also cites other sources more often than being cited ourselves? I'm in either way because as has been mentioned, we will build up a sizeable knowledge base eventually, and have a nice time along the way.
-
No worries. Not sure I share the concern or need for authority or citing, but of course there is a question of keeping focus and what to include. From what I've seen here so far I'm not worried about MT.org trying to become everything for everyone anytime soon though - the admins have created quite the place here without straying far from the MT path. And to me tools seem quite relevant to a multi tool place.
So what is the existing authority on tools? (I can be pretty ignorant at times, so for all I know I might be missing out on the greatest thing since MT
). -
@ThundahBeagle said:
VIDAR & GEARLETHER,I hope there is no misunderstanding. I do like the idea, and I would frequent that subcategory. I also know that many of the folks here have a veritable plethora of information on a number of tool subjects. No doubt it would be a positive addition for any member here.
Where I have any concern - and it is minor - is that I feel that this site is a definitive data source on all things Leatherman, and most things SAK, I know we would not be that for hand tools, and that someone else already is.
The question is: What do we want to be? Do we want to be the definitive source on X, or just another source who also cites other sources more often than being cited ourselves? I'm in either way because as has been mentioned, we will build up a sizeable knowledge base eventually, and have a nice time along the way.
I understand what your saying Thunda. For me the best part of the knowledge here at MTo is the daily hands on shairing of real world ups and downs with a given multi-tool.
Truth, honesty and even humor thrown in for good measure from people that realy care about what they do. These multi-tools get used for everything from changing batteries in a childs toy to rewiring a microwave. (don't try that if you don't know what your doing. 4,000+ volt shock potential even on one thats been unplugged for years) The people using these MT's are real people who have a passion for the Multi-tools they use, not paid reviewers looking for a paycheck. We all have our favorites and tend to gravitate in that direction but we all also respect differing view points and even encourage it. To this point I have not ever found a place with all that to offer concerning hand tools. It may exist some where in the space time contimuam but not in ours yet. We have a foundation here of wonderful knowladgeable people that will always be honest and truthfull and are not offened by difrfering opinions. That to me is worth FAR more than an all inclusive fact archive. Not to say that a rescource like the SAKwiki is not important, it is especialy for those who can focus on collecting. Those rescources just do not realy affect my user tool choices and I would say that most likely holds true for most of us. -
I'll add pictures later, but I can add description now!
I essentially have two toolboxes. One lives in the garage, and has most of my tools in it. All of my bigger stuff lives here. The rough cut saw, the pipe wrench, the gigantic crescent wrench and Channeloks, roofing hammer, files, saws, and myriad other things. I have a set of SAE box/open ended wrenches in a roll, and a socket set in its own carrier.
Then there's my tool bag. I love my tool bag. It lives in the house, and gets used more than anything else.
It's nothing special. A maybe 14 inch long Husky branded, nylon bag. It houses a bunch of stuff. A pair of needle nose pliers, a small Channelok, a small crescent wrench, a hammer, a set of SAE and metric Allen wrenches, a ratcheting screwdriver, nail set, precision screw driver, flashlights, WD40, duct tape, tape measure, level, Stanley knife, scissors, small pry bar/widgy bar, ratcheting 90 degree driver set, small set of files, and basically anything I might need to be super dad.
Mostly, it's there for when I'm too lazy to run to the garage, which doesn't have direct house access. Mostly, I comes out when hanging pictures, changing batteries, maintaining or repair stuff. I generally don't bother with a multitool in it, because it covers most bases. It's probably my one personal possession I would miss if it went missing or was lost. It's MY multitool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


