Wave Owners Club
-
@noah said:
First time poster, and this feels like a question that would have been answered but I've tried searching, to no avail. I've got a recently purchased Wave (two, in fact) which have the same issue; the safety pin what keeps the plain blade from opening when the pliers are in use has a tendency to keep the blade from be used when the tool is in the fully closed position (read: when I should be able use use the knife). Common problem? Fixable by the end user, or just treat it as a warranty item?Welcome aboard noah

It's not a problem that I've experienced. I'm going to assume that these weren't purchased new (correct me if I'm wrong). I would start with giving the wishbone (the forked spring) area a damn good clean, and getting some lubrication under it, to make sure there's not some gunk jammed under it that's holding it open, With the pliers only halfway deployed, the spring should not be forced over by the "ramp" at the back of the plier head. If it is still in "lock" position, I would try gently easing it back with a small screwdriver, in case something got really well jammed underneath it (don't try to do this with the pliers more than 90 degrees from the stowed position). If it's still not easing back, look for crack or signs of sprains near the base of the fork (just above the rivet that secures it to the body)
Good luck, and keep us informed. Other folks with other ideas may be along soon. Watch this space

-
Both purchased new (one's a year or two older than the other) although it's much worse on one of them. On the "good" one, I can almost always open the blade, but even then I do feel the blade touch the pin on the way open. On the bad one, I generally can't open the blade at all if I've just closed the tool. Serrated blade is utterly unaffected on both tools. I'll take a closer look later and see what I can see.
-
No obvious issues, although I noticed that the plain blade on the bad tool is a stiffer to open than the plain on he good tool (or either serrated). Suspect I'll send it in for warranty work; s'what the warranty is for, after all.
-
Welcome to
noah and hope you can get the problem sorted 
-
1012171655 by Poncho 65, on Flickr -
Friend of mine found a LM in the middle of the road - said he was driving and spotted something out of the corner of his eye, stopped the car and waited as several other cars drove over whatever he had seen.
It was a Wave and was in excellent working condition despite the battering it received!
I may have to try a LM out sometime if they're as tough as they seem.
-
@magentus said:
Friend of mine found a LM in the middle of the road - said he was driving and spotted something out of the corner of his eye, stopped the car and waited as several other cars drove over whatever he had seen.It was a Wave and was in excellent working condition despite the battering it received!
It was probably the mini driver he saw.

-
New Page Waves!

Friend of mine found a LM in the middle of the road - said he was driving and spotted something out of the corner of his eye, stopped the car and waited as several other cars drove over whatever he had seen.
It was a Wave and was in excellent working condition despite the battering it received!
It was probably the mini driver he saw.
That was destined for that Mini Driver thread but thought I had better spread the love around...
-
I preferred the pic of Minnie Driver over Mr Bean Sync FYI :D But thanks anyway.

-
Well I used to be a Mini driver myself (a Van and a Traveller) so I prefer the latter.
Also, it took me a while to find a good pic of her.
-
There are great cars. My first car was a 35 year anniversary mini. We went camping in it all over the country - it was briiliant. Too small once our daughter was born though. Would love to get another one someday.
Any pics of your Traveller?
-
@magentus said:
There are great cars. My first car was a 35 year anniversary mini. We went camping in it all over the country - it was briiliant. Too small once our daughter was born though. Would love to get another one someday.Any pics of your Traveller?
None worth showing. It wasn't a woody one - was about '73 0r '74. I bought it for parts for my van. It was painted in what looked like roof paint.

I bought the Van (1968) off a clown which is why it had a sun, flowers, cow etc painted on it. I had plans to spruce it up and put a 1275cc engine from a landcrab into it (the 850's crankshaft broke whilst passing a truck) but sadly I never got around to it and they both rusted away. :'( -
Off a Clown? :D I'm surprised it didn't fall apart completely as soon as you drove it home.

-
@magentus said:
Off a Clown? :D I'm surprised it didn't fall apart completely as soon as you drove it home.
The funny thing was he used the money to buy a pair of shoes.
Nah it was a good wee car. I remember driving fully laden up a big hill with steam pouring through the dash :ahhh then it would be fine on the way down. -
1018171702a by Poncho 65, on Flickr -
@Poncho65 said:
1018171702a by Poncho 65, on Flickr
Poncho, your pictures are always well composed.
-
-
Ok Wave owners.... I have a question about my Original Wave. I’ve had it and USED it since buying it in 2002. It has been sent back once for broken pliers.
My question... from these pics, can you tell how much life the diamond file has left?



Sent from my iPhone using Tapatalk
-
From the pics it looks pretty good to me
I would suggest taking a knife that needs a bit if a sharpen to it and if it sharpens it fairly decent then you should be good to go for a while 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login