NEW Leatherman SURGE owners club.
-
Well, meant the newer version of the blade exchanger.
-
@Outback in Idaho said:
Well, meant the newer version of the blade exchanger.??? ???
Sorry - maybe I'm being particularly dense (the post-lunch espresso has yet to work) but I don't see the link between the newer blade exchanger and the old Surge (which you said you wanted to upgrade to the new model)...As to upgrading the cover - and I take that to mean the part that rotates on the tools pivot to cover the blade exchanger and lock the blade inside the tang/jaw part (?) - to the newer model, I think the exchanger tang/jaw part is identical between the two models, so the covers should be interchangeable in principle, so the only remaining problem is to source one and whether it fits in thickness. As to modifying the cover to the new configuration, that might be possible if you can fashion a spring and a hole to let the spring through in the cover. The spring, at a guess, should be 0.6 mm spring steel, which IIRC is hard to cut/drill...
-
So the newer version just has a hole in there and spring steel as a tensioner? Am guessing here: The new holder is thicker, which holds the spring end in between where the tool implement slides into? Guessing there would be a small "click" heard when closing the cover.
Was hoping there was something more to the new blade exchanger. Is the newer Surge's "liner lock" thick enough to keep the blade exchanger cover locked in from moving, or can the cover still slide back to replace tools when the blade exchanger is locked in?
As for the car comment. Where there are enough cars sold and there is a defect, manufacturer's recall the cars to have the replacements replaced. LM knew of the blade exchanger issues thus why they made an upgrade to it. Yet they don't sell enough to warrant a recall like cars, since a defect in cars could be potentially unsafe to human lives - whereas a tool is minuscule in comparison. So to ask for an upgrade, for a fee, is not unreasonable. ~ Some people go out of their way to intentionally break a tool and expect LM to cover the replacement. <-- That is far worse than asking for an upgrade option.
-
The end of the spring pokes through a hole in the top cover and locks into the hole on the Leatherman saw or file (no audible 'click' for me). I have just realised my jigsaw blades do not have this hole.
The liner lock only acts on the main body of the blade exchanger. The top and bottom covers can swing open to change the blade whilst the blade exchanger is locked.
As for the car analogy, sorry I thought you were talking about a superseded design rather than a defect. Still not sure which you are saying it is.

-
It's the same cover then with a spring added. Probably not as much change then concerning the Blade Exchanger other than perhaps more friction to hold the tool blades in. Thanks, that was what my main inquiry was about. :D
The Surge replacement tools still look to be the same on the Leatherman site.
https://www.leatherman.com/replacement-saw-and-file-for-surge-149.html?cgid=accessories -
-
Well I got my Surge a few weeks back but never carried it due to the defective can opener. I was going to return it for a replacement but I kept having issues receiving a return label from the seller and I honestly just got sick of the situation so I told him to issue me a partial refund and I would just send it to Leatherman to be fixed. I decided I’m just going to carry it as is for now. I never use the Leatherman can opener anyways so it’s not a real issue for me. I’m enjoying my new tool finally!
-
Glad you are getting to use it capt.

I've carried a Leatherman since the mid 90's and have never ever used the can opener.

-
-
1019171718a by Poncho 65, on Flickr -
@captain spaulding said:
Well I got my Surge a few weeks back but never carried it due to the defective can opener. I was going to return it for a replacement but I kept having issues receiving a return label from the seller and I honestly just got sick of the situation so I told him to issue me a partial refund and I would just send it to Leatherman to be fixed. I decided I’m just going to carry it as is for now. I never use the Leatherman can opener anyways so it’s not a real issue for me. I’m enjoying my new tool finally!Glad you are carrying the Surge, was wondering where in process you were.
But, I do believe a picture is required Captain to make it official.
Sent from my iPhone using Tapatalk
-
@captain spaulding said:
Well I got my Surge a few weeks back...
Glad you are carrying the Surge, was wondering where in process you were.
But, I do believe a picture is required Captain to make it official.
+1


-
1020171632 by Poncho 65, on Flickr -
Oh how I would like to join you awls club. But, can not decide, Stainless or Black Oxide?, then Nylon or Leather sheath?
Or, wait till the 2-tone hits Amazon?
Help
Sent from my iPhone using Tapatalk
-
Someone told me (probably earlier in this thread) that I will enjoy it no matter which Surge I get. They were right.
At the time I preferred the stainless steel although I love the BO OHT I got more recently.
The two-tone looks
If it's the "Premium Leather Sheath" I would prefer the nylon one myself.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



