This my moddified wave...
-
Did you use those special security bits to take it apart?
I'd like to get a Wave and mod it almost exactly like that (take out the bit holder and the scissors that I heard aren't that great) and add the longer/dedicated drivers.
-
Yes i like the longer reach of the drivers... BTW, thanks for your offer, PM sent...

and yes, i did use 2 security bits (T10), not dificult to find...
-
@Corrugated said:
Did you use those special security bits to take it apart?I'd like to get a Wave and mod it almost exactly like that (take out the bit holder and the scissors that I heard aren't that great) and add the longer/dedicated drivers.
Most of the 5 star torx LMs are now sold out, all the new ones are 6 star torx. Just ask before you buy.
Dave
-
-
- Removed the bit holder from de wave and put the philips driver from the Kick.
- Removed the little bit holder and put the long flat screwdriver from the Kick, this was a tight fit, because the flat sd is thicker than the small bit holder.
- Bend the little tabs insde the handles, so it can close.
- File the tip of the long screwdriver 1/16" so it doesn't interfire with the scissors.
- Epoxy laptop to side of Wave.
Did you also grind down the pliers?
I tried a similar modification with the Charge and ran into problems since the handles wouldn't close all the way. The pliers didn't have enough room after the longer tools were added. </topic/418
Another forum member, Kodiak, did a similar modification and he ground down the pliers so that the handles would close: </topic/738
Here's a quote from his post:@Kodiak said:
Also, I had to make a little channel on the pliers head on the side. I used a dremel.
-
No grinding on the pliers. Just bend the little tabs inside handles and dremel the tip on the long flat screwdriver so it clears the scissors...
-
@Chaka said:
No grinding on the pliers. Just bend the little tabs inside handles and dremel the tip on the long flat screwdriver so it clears the scissors...That's weird. After the same modification of the Charge, there was a slight gap in the handles when the tool was closed because the longer tools prevented the pliers from being fully recessed into the handles. I thought the Charge and the Wave had the same basic design. ???
Do the handles close all the way shut on the modified Wave? The same as on a normal Wave? Or is there a slight gap? Before I buy a Wave and modify it, I want to make sure that I don't run into the same problem as I did when I tried to modify a Charge. Thanks!
-
According to Paola there's a small gap.

-
I wish the gap was bigger. :(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login