Non Multitools
-
@50ft-trad said:
@50ft-trad said:
I see your combined hammers and prybars, and raise by an axe ...


Need more info

Snail Brand (old English company - now defunkt) Roofing Tool
Wait a minute - hold the bus!!! That is clearly a "multi" tool (and yes i am doing that thing with the fingers), i refer you sir to the title of this thread...
-
These three are my absolute favourites - all USA made: Li'l Pro, Estwing Weight Forward and an unbranded Cat's Paw (technically not a hammer, but it gets used to hit things... so it's a hammer).
wow that middle one sure looks futuristic :o
Thanks, it's the best hammer ive ever had... it's definitely the best belter!
That version of it is really hard to get in the UK now - they didn't sell well here at first, so Estwing decided to stick a round bit on the front to make it look more hammer like... totally mucking up the design (sigh).
How does it differ from the standard Estwings (apart from looks)?
-
Isn't even a claw hammer a multitool?

-
Recently, I got this STANLEY 1-54-911 hammer
to replace one whose handle finally gave up the ghost. The old one's head is just fine but having a good new handle fitted would cost around €10 so I figured I'd pay a couple monnies more and get a new hammer.
I thought about getting a GEDORE (HABERO) ROTBAND-PLUS 500 g for €18 but I couldn't find one near me and since I like to check things before buying them I went with the STANLEY. Having -just slighty- sworn off wooden handles for some things might have helped tip the balance a little but I digress...
I picked this STANLEY hammer 'cause it feels quite well balanced
and allows for a confortable grip all along the shaft (pfrsantos, naughty step; you know why
), also because the rubber around the shaft is a nice addition (pfrsantos, you know the drill ::) )However, two days ago I used it for the first time to give a few light taps on a wood screw I wanted to lower just by a hair. The wood the screw was fastened on was quite decayed and I know I'm not supposed to drive screws with a hammer but I've done that before
and so I wasn't expecting to see this:The brown part isn't as pronounced as the flash (sorry about that, those are the best pics I could get) makes it appear and was there almost since the beginning.
I guess they do mean it about the safety eyewear?!

-
@50ft-trad said:
@50ft-trad said:
I see your combined hammers and prybars, and raise by an axe ...


Need more info

Snail Brand (old English company - now defunkt) Roofing Tool
Wait a minute - hold the bus!!! That is clearly a "multi" tool (and yes i am doing that thing with the fingers), i refer you sir to the title of this thread...
Well, one could argue it is simply a trade specific tool ;)
Besides, no matter how much I try I can't bring myself to see a hammer as a single use tool but rather as a means of adjustment.
Just like how I can't see these two items as non-multitools:
The thing with the green handle is from late '80s, it's been repeatedly used, by me and others, as a chisel through concrete and other stuff, as a lever, as a pry tool, as a scraper, as a punch and even as a small parts retriever since it is magnetic -it still is though just barely enough to keep a screw in place- and it's lived to tell the tale.
On occasion it works well as a slotted screwdriver too. I love those things, I have 4 or five different sizes.
The knife is a MORA 510 (newer version) I recently used to do work on wood for home maintenance and I'm not done yet. It sure can do more than just cut :ahhh
-
These three are my absolute favourites - all USA made: Li'l Pro, Estwing Weight Forward and an unbranded Cat's Paw (technically not a hammer, but it gets used to hit things... so it's a hammer).
wow that middle one sure looks futuristic :o
Thanks, it's the best hammer ive ever had... it's definitely the best belter!
That version of it is really hard to get in the UK now - they didn't sell well here at first, so Estwing decided to stick a round bit on the front to make it look more hammer like... totally mucking up the design (sigh).
How does it differ from the standard Estwings (apart from looks)?
As most the weight's at the front, it gives a bit more of a bang while using less effort... it feels lovely in the hand too - as in you want to swing it. I do like the all metal estwings too though, i had a lovely leather bound one years ago, but it got nick'd.
-
Thanks, a standard Estwing is on the list but if I see one of those I might get it instead.

As long is it rides OK in a tool belt.
-
Isn't even a claw hammer a multitool?

All I know is I don't get claw hammers...

Your hammers look more like traditional hammers though!!!
Sledgehammers, mallets and special hammers aside, the hammers you'll see most often around here have heads like the STANLEY I got, then like this

and also ball peen hammers.
The claw hammers I've associated with the Anglosphere, for some reason. Maybe I'm wrong. I understand their use I just don't like the idea of putting so much stress on the handle where it meets the hammer's head :ahhh
-
Isn't even a claw hammer a multitool?

All I know is I don't get claw hammers...

Your hammers look more like traditional hammers though!!!
Sledgehammers, mallets and special hammers aside, the hammers you'll see most often around here have heads like the STANLEY I got, then like this

and also ball peen hammers.
The claw hammers I've associated with the Anglosphere, for some reason. Maybe I'm wrong. I understand their use I just don't like the idea of putting so much stress on the handle where it meets the hammer's head :ahhh
Well, we seem to love our claw hammers here. I get the impression that the claw hammer is considered THE hammer, and everything else is for "speSmurfpillsed" tasks.

-
Isn't even a claw hammer a multitool?

All I know is I don't get claw hammers...

Your hammers look more like traditional hammers though!!!
Sledgehammers, mallets and special hammers aside, the hammers you'll see most often around here have heads like the STANLEY I got, then like this

and also ball peen hammers.
The claw hammers I've associated with the Anglosphere, for some reason. Maybe I'm wrong. I understand their use I just don't like the idea of putting so much stress on the handle where it meets the hammer's head :ahhh
I've had a hammer head fly off... and in a perfect arc too, but ive never managed to snap or damage one using the claw end. I've seen a few of the single piece estwings bent in two by being run over though.
I agree about claw hammers being an angloshere thing, but saying that, the Japanese have them too, but the proportions are completely different... that might be an American influence post ww2? -
@Fuzzbucket said:
I've had a hammer head fly off... and in a perfect arc too, but ive never managed to snap or damage one using the claw end. I've seen a few of the single piece estwings bent in two by being run over though.
I agree about claw hammers being an angloshere thing, but saying that, the Japanese have them too, but the proportions are completely different... that might be an American influence post ww2?Reminds me I still need to fix a total of three hammer heads
I am very intrigued by those one-piece Estwing hammers (and hatchets ::) ) but nobody sells them locally and Amazon won't ship them to Greece :'( 
If I had to guess I'd say it must have something to do with the pioneers around the world. One tool doing two jobs relevant to eachother has many benefits when gear and materials are scarce, hard to come by and carry around, as a nail puller-crowbar would be. Plus, a claw hammer can help speed things up when building something and you have to rectify something.
Just guesses, though

-
You're probably onto something there. A claw hammer is essential equipment for any builder here.
A builder friend of mine took his Estwing back for replacement (I can't remember the issue). They declined as his had little marks on the side of the head, a result of straightening nails that have bent as they are being driven in, which everyone does. -
On the new forum question: I've thought about it a few times and while it does seem a good idea I feel we might be better served by dedicated threads (like Hand Tool Porn or For Hand Tool Lovers, Addicts and Aficionados). Should said threads become so numerous then a new forum might be in order.
-
@Syncop8r said:
... They declined as his had little marks on the side of the head, a result of straightening nails that have bent as they are being driven in, which everyone does.Oooh; that's low and contemptible! It's only natural for one to do that (unless there are nail straighteners now that I am not aware of)?
I hope your friend took his business elsewhere.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login