found a use for the useless hook
-
@shadowrider said:
I meant that my Swissbianco Yeoman has the nail file on the hook.
Which I wish it didn't, as manicure features make a SAK look kind of "girly" in my head.
-
AFAIK the UK's Duke of Edinburgh model also has the nail file hook, as it's basically a Compact, but with a rounded main blade and Phillips driver in place of the Corkscrew. See: http://www.sakwiki.com/tiki-index.php?page=DofE+Pocket+Tool
-
Good for pulling out some of those brass staples on larger heavy duty boxes too.
-
can't say I agree with the wording of the subject line but I'm glad someone found some value in el Hook.

-
Chuck Norris can kill people with the multipurpose hook.

-
Working on farm equipment, pulling pins and accessing difficult to get at latches holding body panels (you've basically got to remove all the panels surrounding the hood to get to the dipstick on the Yanmar engine Deere compact tractors) are something hard to do without the hook, as pliers can damage those components. I also carry square bales with it, most weighing in at 30 lbs.
-
@jalind said:
For those that have a Plus model with the hook, it can be used to hold the pen.
[list type=decimal]- Open the hook
- Place pen between the liners; you may have to turn it for it to fit
- Close hook on pen to secure it
- Start writing using body of SAK
Much easier than trying to hold the pen by itself! Photobucket is completely and utterly FUBAR today, so I'm uploading the photos as attachments.
John
Dang! Thanks for the pics. Showed that to my wife. She keeps a Compact in her purse, but even with her small hands the pen by itself is awkward. With my huge mitts....Forget it! Until now.
-
I just used the UPHook to get stones stuck in my tire treds out, safe and easy....
-
@shadowrider said:
Chuck Norris can kill people with the multipurpose hook.

Actually, I heard it was his breath.

-
/topic/71139
Remember, to a caveman a pencil is only tinder, for he knows not it's value.
-
@ironraven said:
/topic/71139Remember, to a caveman a pencil is only tinder, for he knows not it's value.
I like that! 8)
-
Da Hook comes in very handy when taking pictures outside.

-
:D -
Seriously, you can get stones out of your car tires....
-
So, at work, if there's a guy in the office that I have to find work to give him, he is superfluous and UN-needed and sent home.
That would be the hook. Taking rocks from my tire tread is accomplished with the awl, the cap lifter screw driver, the back spring Phillips...
Brass staples are easily taken out of cardboard boxes with the plyers of my PS4. If you want to keep it SAK related, the plyers of my Deluxe Tinker. Or pried out with one of the screw drivers.
No ill will here fellas, just saying you would be hard pressed to find a function for the hook that can't be done with another tool or component of the same knife.
What a waste of metal. Just think, - all those hooks could have been used for Pioneer X scissors or Camper saws...
-
@ThundahBeagle said:
So, at work, if there's a guy in the office that I have to find work to give him, he is superfluous and UN-needed and sent home.That would be the hook. Taking rocks from my tire tread is accomplished with the awl, the cap lifter screw driver, the back spring Phillips...
Brass staples are easily taken out of cardboard boxes with the plyers of my PS4. If you want to keep it SAK related, the plyers of my Deluxe Tinker. Or pried out with one of the screw drivers.
No ill will here fellas, just saying you would be hard pressed to find a function for the hook that can't be done with another tool or component of the same knife.
What a waste of metal. Just think, - all those hooks could have been used for Pioneer X scissors or Camper saws...
Okay Thundah,
Time to burst the bubble,
Find me another tool on a SAK that can efficeintly pull that elusive wire from a tied and bundled section of control wiring for testing without potentially dammaging it. There are real uses for the hook, just maybe not in everyones daily use list.![20171102_114922[7511] (2).jpg](/assets/uploads/_imported_attachments/migrated/352877_20171102_114922%5B7511%5D%20(2).jpg)
-
So, at work, if there's a guy in the office that I have to find work to give him, he is superfluous and UN-needed and sent home.
That would be the hook. Taking rocks from my tire tread is accomplished with the awl, the cap lifter screw driver, the back spring Phillips...
Brass staples are easily taken out of cardboard boxes with the plyers of my PS4. If you want to keep it SAK related, the plyers of my Deluxe Tinker. Or pried out with one of the screw drivers.
No ill will here fellas, just saying you would be hard pressed to find a function for the hook that can't be done with another tool or component of the same knife.
What a waste of metal. Just think, - all those hooks could have been used for Pioneer X scissors or Camper saws...
Okay Thundah,
Time to burst the bubble,
Find me another tool on a SAK that can efficeintly pull that elusive wire from a tied and bundled section of control wiring for testing without potentially dammaging it. There are real uses for the hook, just maybe not in everyones daily use list.Hi Douglas,
All in good fun. Bubble intact, I untie and unbundle wires when working and testing them, at least, as much as possible. And rebundle or retie when done. When I'm ready to get serious, a dedicated tool is the order of the day. I'm no electrician. For computers and telephone wire and circuit boards, I use a Menda Spudger with wire hook.
What you are doing in the picture is certainly more easily done with the hook, if you decide not to untie the bundle. But it could be done - carefully - with the backside of the awl, or gingerly with the can opener, or half-stop the cap lifter and use that. Backspring Phillips can worm it's way in there. Depending on the location of the wire, maybe even the Deluxe Tinker plyers.
Yes, pretty easily done with the hook as well, but I'm just saying, to make the hook a permanent addition to every SAK with scissors hardly justifies the cost and material.
Possibly on some sort of electricians version.
-
Additionally, if I am testing wires in the first place, I presume I have my volt-ohm meter or multi-meter with me. One of the probes can help me manipulate wire, unplugged from the meter if need be. Sorry Douglas.
Seriously though. All in good fun do I do this. I don't truly begrudge anyone for using the hook, after all, it's there on the "new" knives. I more begrudge Victorinox for wasting resources on altering EVERY knife with scissors for a tool, the uses of which are somewhat, meh.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login