DIY leather boots?
-
I don't know how hard it will be to find steel-less tires, but in any case, my plan of action is to:
Make a prototype out of cheap faux leather, to confirm fit and to get an idea of how long it will take to cut out the parts. Also will need some special leatherworking tools, like flexible needles and tiny awls, and cutty things to make cutting out small shapes easier.

Meanwhile, I need find a source of 8oz leather. Any recommendations?
Going on at the same time, looking for appropriate old tires and some hobnails.
Cut out the pattern in the leather. Stitch together and add sole.
Profit!

-
There are some posts around here somewhere on leatherworking tools and books, especially by Chako.
LOTS of info...This might be a good place to start: /post/1532024
Oh and /post/1429888
-
I think you'll need veg tan leather so it absorbs whatever treatment you give it, and there's plenty on the 'bay, unless you get an idea of what you're after and buy a couple of handbags in a charity shop. Getting large enough single pieces may be challenging.
Are there any cows where you live? If so are you emotionally attached to any of them? :D
-
This is Ireland, we have LOTS of cows. :D
I'd nab one, except for the tricky part of tanning the leather.
The charity shop is probably out of the question if I don't want mismatched leather on my shoes. :ahhh
And yes, everything points to veg tan leather being optimal.
-
@Pablo O'Brien said:
This is Ireland, we have LOTS of cows. :D
I'd nab one, except for the tricky part of tanning the leather.
The charity shop is probably out of the question if I don't want mismatched leather on my shoes. :ahhh
And yes, everything points to veg tan leather being optimal.
If you're out and about wearing those shoes Pabs, mismatched leather will be the least of your problems. The youth can be so cruel. :D
Nabbing the cow is the tricky part - tanning it will be easy compared to the nabbing.
-
The look like frostbite would be a problem.
Then again, I'm rrather attached to my toes and come from a place where measuring snow in feet does happen.
-
Frostbite? That's an alien concept for me. :P
It only snows a cm or two a few times a year, and the temp only drops below freezing a few days a year. -
I wanted to use veg tanned 3mm leather, but I may have to settle for 2mm chrome tanned? :-
Large pieces of Thicker stuff seem to be rarer, and largee pieces of thick veg tanned leather rarer still.
By large I mean about one square metre, but not an entire cow ::) -
Dolly and Molle has a cow or two to use.

-
@ducttapetech said:
Dolly and Molle has a cow or two to use.But can they tan it without stinking your workshop up to high heaven? :P
-
@Pablo O'Brien said:
Dolly and Molle has a cow or two to use.
But can they tan it without stinking your workshop up to high heaven? :P
Not sure. I just eat cows, never tried to tan one before.On a serious note, have you checked Tandy? Or is that not are readily available to you lot?
If you are wanting to use tire tread, most motorcycle tires are not steel belted. They usually are nylon belted. -
@Pablo O'Brien said:
Dolly and Molle has a cow or two to use.
But can they tan it without stinking your workshop up to high heaven? :P
Not sure. I just eat cows, never tried to tan one before.On a serious note, have you checked Tandy? Or is that not are readily available to you lot?
If you are wanting to use tire tread, most motorcycle tires are not steel belted. They usually are nylon belted.Didn't know that.

I'm reconsidering using tires, it seems that buying some rubber soles would be the best option for now.Checked tandys EU again, it seems that I can see a few possible options.

The trouble is that the pieces they sell are very large, and thus expensive.
Maybe I should give them a call to find out if they have some smaller pieces?Also, I've been considering leather weight/thickness. I don't know how thick it should be for this application. :ahhh
I wanted 8oz or so(3.2 mm), but I wonder if 5, 6 oz (2, 2.4mm) will do? -
8oz will work great for the sole. I would use 5 or 6 oz. for everything else.
-
@ducttapetech said:
8oz will work great for the sole. I would use 5 or 6 oz. for everything else.Hum... sounds a bit fishy to me...

-
Thanks for the advice.So I need about 2 sq ft of 8oz, and about 5 square feet of 5/6oz, for one pair, not accounting for mistakes.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

