Chuck Yeager Challenge
-
Oct 29:
While thinking about hunting pheasant, I was out tinkering in the garage. I had secured an extention cord to a shelf with cable tie to prevent it from being pulled out. Shifting things around a bit, I used the orange peeler to remove said cable ties.

This may be my new favorite use for this tool. I'm thinking of renaming it the "Cable Tie Cutter" (CTC). The blunt, chisel tip allows one to safely force the CTC between cord and tie. The teeth dig into the edge of the tie and snap it with a satisfying 'pop'. Short of some wire snips, the CTC is the way to go for this task. Victorinox should add the CTC to the Electrician.
-
Day 29
Today I prepared a homemade walnut bread. Used the large blade to cut the bread in some little pieces.
It's sharpen, and the blade cut the bread like it was butter.
-
While thinking about hunting pheasant, I was out tinkering in the garage. I had secured an extention cord to a shelf with cable tie to prevent it from being pulled out. Shifting things around a bit, I used the orange peeler to remove said cable ties.

This may be my new favorite use for this tool. I'm thinking of renaming it the "Cable Tie Cutter" (CTC). The blunt, chisel tip allows one to safely force the CTC between cord and tie. The teeth dig into the edge of the tie and snap it with a satisfying 'pop'. Short of some wire snips, the CTC is the way to go for this task. Victorinox should add the CTC to the Electrician.

This is an excellent revelation! This is an application that I had not considered but will definitely use!

Jim
-
Day 3, did some good variety of opening boxes! Mostly lights from ikea. Also used the screwdriver to connect the wires. Worked great! At least this one fits, my other ones, on the can openers are all too wide! I’m loving this challenge!!

Sent from my iPhone using Tapatalk
-
Your off to a great start. Stay the course!
-
Think I’m just used to using vic’s and other MT’s a lot! Now being down to just one is definitely making my pockets a lot lighter.
(I am not counting my leatherman thats in the car. I want to try this minimalist challenge and will do my best to fullfill it as much as possible but I don’t want to strand somewhere and wish i had my surge)So far, only thing i’ve used is the exec and I’m unless i really dont have any other option i wont touch anything else ;)
Sent from my iPhone using Tapatalk
-
It worked surprisingly well Nix! Bill is right, though, in that the fish scaler works better than anything else for pumpkin carving.
I've yet to get out Bill, but you've got me thinking!!@Fast Bill said:
Sounds like a great day, Fast Bill. Any luck?
Barry, I've got a pumpkin waiting to be transformed into a Jack O'lantern. I'll give the Executive a shot!
It was nice to be out again Nix, now the season has started, but to be honest it's too mild and we need a good frost. I annoyed a couple of crows but no more.

-
Day 30
This is the coat rack at my home entrance
This morning I noticed that the screws were loose, so I tried to fix them. If I will not solve , probably I will add some glue.

-
10-29
Veggie Access Response Tool in action.

Sent from my SAMSUNG-SM-N900A using Tapatalk
-
LOL. Right on!
Sent from my iPhone using Tapatalk
-
@Barry Rowland said:
Great job everyone!! My Executive with my shortwave receiver, a Grundig G5. I've been listening to SW broadcast since I was a boy and have always enjoyed it.Same here. I used to have a Grundig Yacht Boy which is very much like the G5. I´ve had various Sony and Philips SW radios as well, but my pride and joy is a Radio Holland receiver from the early sixties. It´s a state of the art superheterodyne, one of the first to be fully transistorized, i.e. no bulbs. It weighs over 20 kilograms. When still a boy living with my parents, I had an entire wall of my room covered with QSL cards from all over the world.
Once, over 30 years ago, while I was listening to Nigeria´s national broadcasting, there was a coup d´état by the military; it turned out I was the first one in the Netherlands to know about this. Included with the QSL I got an official portrait of the new general in command.
Edit. This was president Gowon (1975-1976). I had to look it up on WikipediA. The radio announcer informed the world that armed military men had entered the studio and were taking control. This was a coup d´état without bloodshed, but Gowon was killed soon after.
-
This is the coat rack at my home entrance
This morning I noticed that the screws were loose, so I tried to fix them. If I will not solve , probably I will add some glue.Mini, might I suggest an alternative?
A trick guitarists use for loose strap buttons is to take the screw out of the hole, then stuff the hole with wooden match sticks. Then, reinstall the screw. The soft wood of the match sticks compresses around the screw, and holds it tight without glue. You get to use the Exec for loosening, cutting the matches, stuffing them in the hole, the reinstalling the screw. This avoids using glue that can drip, or swell the wood. Just a thought.Sent from my SAMSUNG-SM-N900A using Tapatalk
-
Thanks Mizedog, I really appreciate your suggestion, because I think the weight of the clothes has deformed the hole.
-
10-30
It's 31 degrees, snow is expected. Of course, they have the ac cranked up here at the office. The cold air comes up from the floor by my desk, the warm air from a duct next to the window glass (that seems counterintuitive to me). I used the Executive's orange peeler as a hook to lift up the floor grate, and close the duct. Worked just fine.
Sent from my SAMSUNG-SM-N900A using Tapatalk
-
@Ronald Schröder said:
@Barry Rowland said:
Great job everyone!! My Executive with my shortwave receiver, a Grundig G5. I've been listening to SW broadcast since I was a boy and have always enjoyed it.
Same here. I used to have a Grundig Yacht Boy which is very much like the G5. I´ve had various Sony and Philips SW radios as well, but my pride and joy is a Radio Holland receiver from the early sixties. It´s a state of the art superheterodyne, one of the first to be fully transistorized, i.e. no bulbs. It weighs over 20 kilograms. When still a boy living with my parents, I had an entire wall of my room covered with QSL cards from all over the world.
Once, over 30 years ago, while I was listening to Nigeria´s national broadcasting, there was a coup d´état by the military; it turned out I was the first one in the Netherlands to know about this. Included with the QSL I got an official portrait of the new general in command.
Edit. This was president Gowon (1975-1976). I had to look it up on WikipediA. The radio announcer informed the world that armed military men had entered the studio and were taking control. This was a coup d´état without bloodshed, but Gowon was killed soon after.
that's a result Ronald (listening I mean.... not being in the studio at the time) -
@Barry Rowland said:
It worked surprisingly well Nix! Bill is right, though, in that the fish scaler works better than anything else for pumpkin carving.
I've yet to get out Bill, but you've got me thinking!!
@Fast Bill said:Sounds like a great day, Fast Bill. Any luck?
Barry, I've got a pumpkin waiting to be transformed into a Jack O'lantern. I'll give the Executive a shot!
It was nice to be out again Nix, now the season has started, but to be honest it's too mild and we need a good frost. I annoyed a couple of crows but no more.
Thank you Barry, I sometimes think I'm a one man card carrying member of the Fishscaler Party ! The only one too ...
and as All Hallows Eve draws near I shall be ready to repel the undead with ... my Ambassador
-
October 29th
Long day ahead today. I had a 3 hour drive ahead for me in the morning.
I was going to visit Europes largest militaria fair.
As a surprise for my girlfriend I put a new pack of candy in the candy tin. She thinks there is only one packet left, so she will have plenty to snack on.
Executive candyThe rest of the day the Exec opened some packets, sausages, bread and such. I didn't take any pictures because it was clumsy in the car.
Did I find any SAKs today? Well, yes. I'll post that in the 'latest SAK' thread.
I really wanted a GAK, but I only found the Fosco models. No Vics.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

