old Champ rebuild
-
@Pablo O'Brien said:
Hearsay!

One layer per spring, so the saw and fishscaler count as two.
OK Pabs, sounds good, BUT...
By that logic the Gardener, which only has a saw, a blade, and scissors actually has 7 springs including the lock spring, so it's a 7 layer. >:D
AND, it also has an extra liner with nothing in between, which by my reckoning makes it a 4 layer. >:D
So is the Gardener actually a 3 layer knife?

Also, the Classic technically has 4 springs! :ahhh
I guess we are all correct in one way or the other.


-
@Pablo O'Brien said:
Hearsay!

One layer per spring, so the saw and fishscaler count as two.
OK Pabs, sounds good, BUT...
By that logic the Gardener, which only has a saw, a blade, and scissors actually has 7 springs including the lock spring, so it's a 7 layer. >:D
AND, it also has an extra liner with nothing in between, which by my reckoning makes it a 4 layer. >:D
So is the Gardener actually a 3 layer knife?

Also, the Classic technically has 4 springs! :ahhh
I guess we are all correct in one way or the other.

Smurf those oddball models messing with the systems we try to come up with.

-
Almost finished. Peening went well, I have a small 8 oz. ball pein hammer that I modified a little, the ball from the factory is not smooth on most modern ball peins, so I reworked that, and the face was domed slightly so I flattened that as well. Good to have a flat face hammer for some projects, but for the pins, the round side is indicated. I use the Channels to make sure the assembly stays tight during peening, squeezing it together every so often. It takes some time as the peening process is slow and steady, being careful to keep everything aligned and not going too far or striking too firmly after the pin is clinched. I check the action and alignment every so often to make sure the tools are neither tight or have side play. Having a cup of cthoffee before starting helps too, it keeps the focus going. :P Now just need to file the pins flat so the scales fit, clean it well to get rid of any filings and such that may have collected, check all the tool action, oil and work the tools again to make sure the oil gets in to all the joints, and install the scales and scale tools. :)
edit: One more note on peening, it helps to have a good solid surface to work on, a large anvil works great.

edit 2: It might not matter, but also when peening, I work from one end to the other. It's tempting to do the ends first, but there is a chance that the outer liners will bow.



-
Done. :D
Pumpkin carving time. 🎃

-
Awesome thread and job!! Beautiful knife!!!!
-
Neat job and brilliant thread Thanks Twiglet!

-
I bow to your peening skills. :o

-
@Pablo O'Brien said:
I bow to your peening skills. :o
And we bow to your preening skills.

-
Thanks guys!

It was fun to get the old hoss going again. Carved a pumpkin first thing, with a nice sharp main blade. :D
I will follow up with some more pics (and musings) soon.

-
Done. :D
Pumpkin carving time. 🎃
a most interesting thread! Enjoy that Pumpkin, I carved mine today with my Champion -albeit the Wenger one, not Victorinox's- by my side

That is a very cool pumpkin Peacent!

Nice to have one more thing that a SAK does well.

-
Was thinking about my next project. Gareth has a really nice black Grand Prix.
I have been wanting a Mountaineer with no keyring and new file dressed in black for a while, so while I'm set up for it I will go for that next. 
-
The exchanged parts, some worn, some unuseable, some simply annoying. :D

-
I'm pleased with the results. The keyring always bothered me, I never had use for it on this knife, and it gets in the way of closing the awl. Feels much better without it, and makes the whole thing much sleeker somehow. The new file is great, I used the one on my Spirit a lot for this build, and it would have been much slower and more frustrating with the old style file. I filed away so much with the Champ that the original file was nearly useless. These 2 things are the most significant improvements. So what color to go with? There are so many choices now, but in 1992, only red and black were readily available. I decided to keep with the original color, using my last set of red plus scales. All the original tools that are still there have a lot of usage marks, and there is some damage and marks on the original liners that are still there also. I took the time to smooth out all the rough parts with a file or fine sandpaper, and polished the liners with steel wool. Sitting on a big diesel engine for a week left some marks on the liners and springs, and there is a small flat spot on the corkscrew, but all in all it's very presentable now. All the SAKs I had before this one are gone, so this is my oldest remaining one, 25 years, and now, still going! What I really wanted for this knife was to continue to use it, so I suppose I accomplished this. It has some good patina, all the tools are sound, and it still feels like the same old SwissChamp, only better. :)



-
Nice job Twiliter!

-
Thanks VM

-
Very curious to see this project, but the pictures don't seem to work. Or is this an issue on my phone? [emoji848]
-
My guess is your phone G-Fiddy. Are you using a mobile smart phone or your hard wired landline? :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
