Dave K's gift
-
Lol - thanks for the praise Flash !
Neil - I'm still waiting on the wood mate, but I swear I'll go and cut down a tree with my Farmer if I don't get it soon :D
-
Those are great!

Great work Dave. :)
-
Great job Dave

Whe wooden scales should work better in Nick's socks too :D
-
Nice now you should be marketing those. i would certainly buy one!
-
Cool scales there Dave

One quick question, are those scales glued onto the SAK because I thought with Vic scales once you clip them off they don't clip back on again

-
@cryptrick said:
Cool scales there Dave
One quick question, are those scales glued onto the SAK because I thought with Vic scales once you clip them off they don't clip back on again

Cheers

I'm not actually sure how Flash glued them on, but I suggested he used an epoxy resin, which is what I've used myself previously. It's true that with the Vic scales, when you pop them off, you can lose a bit of the celidor / nylon or whatever, which means they won't fit so snugly again. I often get a little ring of plastic that comes free after removing them.
With the scales in the picture, it would be very difficult to engineer a "snap fit" like the original Vic scales, as simply, hardwood doesn't have the same elastic properties as plastic, and I don't have the ability yet to make them that accurately! I therefore tend make the recesses in the scales quite a bit larger than the bushings that they fit over, to avoid wear to the wood during use. Epoxy resin (specifically araldite) seems to work really well for that, and does actually allow you to remove them at a later date if you need to. The down side to that process is that they can slip a bit whilst the glue hardens if you're not really, really careful, as in Flash's 3rd pic!
-
Cool scales there Dave

One quick question, are those scales glued onto the SAK because I thought with Vic scales once you clip them off they don't clip back on again

Cheers

I'm not actually sure how Flash glued them on, but I suggested he used an epoxy resin, which is what I've used myself previously. It's true that with the Vic scales, when you pop them off, you can lose a bit of the celidor / nylon or whatever, which means they won't fit so snugly again. I often get a little ring of plastic that comes free after removing them.
With the scales in the picture, it would be very difficult to engineer a "snap fit" like the original Vic scales, as simply, hardwood doesn't have the same elastic properties as plastic, and I don't have the ability yet to make them that accurately! I therefore tend make the recesses in the scales quite a bit larger than the bushings that they fit over, to avoid wear to the wood during use. Epoxy resin (specifically araldite) seems to work really well for that, and does actually allow you to remove them at a later date if you need to. The down side to that process is that they can slip a bit whilst the glue hardens if you're not really, really careful, as in Flash's 3rd pic!
Thanks for the info, thought I could remember something about them not clipping on correctly after taking them off. If in doubt glue it on :D
-
Dave is right...I used Araldite and then placed them in a cloth covered clamp overnight. Scrape away the excess glue and your good to go

-
Very nice handy work both of you guysDave for making them

and Flash for putting them on

-
That's looking very good. Gratz and good job.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
