Show off your Sak mod's!
-
Nice work Tom - all alox work is nerve wracking!

-
Nice mod T14... reused the cadet pins?
Sent from my iPhone using Tapatalk
-
Two more mods this weekend. Much more relaxing than alox work

- First a simple 84mm apprentice mod based on a nylon waiter
- Next is a two layer 91mm "cyberapprentice" or somesuch. Based on parts from a DoE and a cybertool34
I hope to be able to transition most of my user knives to nylon scales. Much better cosmetic durability with nylon.


-
And for the record 875fps.. you do stunning work. What an absolute pleasure to watch

-Tom -
Love the Cybapprentice T

-
@875fps said:
T14, on that Cyberapprentice, do you repeen and then reattach the nylon scales? Those mods look fun to do.Yup... I basically just take knives apart, mix and match layers, and then reassemble using new pinstock and the standard bushings. Scales are press-fit onto the knife as normal.
But for coloured alox I reckon the screw-and-pivot method is better.
-T -
I recently "lost" my daily EDC SAK to TSA (airport security). I forgot I had it attached (in sheath) to my belt, and too late as to be able to return to my car and leave it there. I had a fairly dirty "parts" SAK SwissChamp that I bought to "extract" its magnifying glass/phillips and file layers for some projects I have in mind.
After retrieving these two layers, I used the leftover parts, after cleaning and polishing them a bit, and put together the following 6-layer SAK, where the scaler/ruler took the place of the main (and really beaten) main blade using a brass washer and a broken small blade (as spacer riding along the original lanyard spacer). I used the backspring of the scaler/ruler tool for a spare small blade, which functions and snaps great. I only needed to cut a small notch in the liner to access the nail nick. I do use the ruler on the scaler quite often, so this layout is a great EDC for me, paired with a one-handed knife (Spyderco Para3) for my cutting needs. I am happy! Raul



-
Sorry for your loss Chivy, but that is a nice mod

-
Indeed! :o

It looks like a great mod if you prefer to use dedicated knives over the SAK main blade, and it still gives you the "mini red toolbox" aspect of a SAK.
No liner between the small blade and saw?
-
@Pablo O'Brien said:
Indeed! :o

It looks like a great mod if you prefer to use dedicated knives over the SAK main blade, and it still gives you the "mini red toolbox" aspect of a SAK.
No liner between the small blade and saw?
Pablo: No liner between the small blade and saw, other than a slim (0.005") bronze washer needed to even the thickness of the scaler/ruler spring I used. I debated as to keep this modded SAK as bladeless -perhaps making it TSA compliant - but I do not quite trust their judgement with multitools. When flying I always carry those in my checked bags, or not travel with them at all.
Raul -
@Pablo O'Brien said:
Indeed! :o

It looks like a great mod if you prefer to use dedicated knives over the SAK main blade, and it still gives you the "mini red toolbox" aspect of a SAK.
No liner between the small blade and saw?
Pablo: No liner between the small blade and saw, other than a slim (0.005") bronze washer needed to even the thickness of the scaler/ruler spring I used. I debated as to keep this modded SAK as bladeless -perhaps making it TSA compliant - but I do not quite trust their judgement with multitools. When flying I always carry those in my checked bags, or not travel with them at all.
RaulThanks!

And good point, they would probably take it even if it just had scissors.
-
It's been a while since I've posted, but I've put up a site of the mods I've built. Some were previously posted here, others not.
Please check out https://sites.google.com/view/bobs-swiss-army-knife-mods/home if you have a moment or two.
-
Finally completed my “Compact Tinker Small” build based on a Waiter, Tinker Small and scissor and backspring leftover parts from a 91mm... Slapped on the custom plus scales I made a while back...



Sent from my iPhone using Tapatalk
-
Nice work J-Man

When you say you used the scissors and backspring from a 91mm - did they need much coaxing to fit?
Great job though!

-
GJ Bob and Jaya

The smaller knives need Mod-love as well :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

